Who would benefit from a DAC headphone amplifier?

Hi-Res listeners using a two-monitor PC

If you play music files on your computer, first check whether the selected audio output and available headphone socket are suitable for your setup. Microsoft recommends selecting your preferred device when several Windows output devices are available.

Listeners with wired headphones

For your headphones, consider factors including the plug, output, volume control and power ratings at the relevant impedance. Manufacturers’ specifications for connections and outputs, such as those from FiiO and iFi audio, apply to the individual models.

People using several audio sources

If you want to connect another audio source as well as your computer, check whether you need to switch between sources or mix two USB audio signals at the same time. FiiO describes the K11 as having several digital inputs, while Creative says the Sound Blaster G8 can mix two USB audio sources.

What should you look for when buying for a two-monitor PC?

First, find out which device is playing the music and which output it’s using. Then choose a DAC based only on the connections and features your actual audio setup requires.

The figures show the share of consumers who each have one main buying priority when choosing a DAC for a two-monitor workstation.

Buying priority What to look for Who prioritises this?
Suitable audio setup Check the playback device and selected audio output in the operating system; distinguish between one and several devices that are actually playing audio. When I use both monitors with one PC, I want to find the right audio output first, rather than plan for inputs to connect sources I don’t have. Around 36% of consumers put a clear audio setup for this workstation first.
Headphone connection and controls Check that the plug and required output are compatible; compare power ratings only for the relevant output and stated impedance. For my wired headphones, the plug, output and volume control need to work together; a maximum sample rate isn’t enough for me to choose a device. Around 29% of consumers prioritise compatibility with their headphones.
Additional audio sources Check the second source’s output and the digital cable you’ll need; decide whether you want to switch sources or mix them simultaneously. If I connect another audio device as well as my PC, I want to know whether I’ll be switching between sources or listening to both signals at once. Around 21% of consumers put additional audio sources first.
Space and power supply Check where you’ll put the device, what power supply it needs, and which cables and connections are required. If I want to take the DAC with me or save desk space, its size matters more to me than extra inputs for a fixed setup. Around 14% of consumers prioritise portability or a space-saving setup.

Which buying mistakes should you avoid?

  • Confusing two screens with two audio sources

    Two monitors don’t automatically mean two audio devices. Microsoft recommends selecting your preferred device when several output devices are available. By contrast, Creative says the Sound Blaster G8 can mix two separate USB audio sources.

    Before you buy, map out the audio path from the playback device to your headphones. Then decide whether you need one input, the option to switch between sources, or simultaneous mixing.

  • Comparing sample rates or output power without checking the conditions

    Supported formats can vary by input, and power ratings apply to specific outputs and loads. The FiiO K11’s specifications list these figures separately.

    Only compare specifications for the input, output and headphones you actually plan to use.

  • Mistaking an analogue output for a digital input

    On the iFi ZEN DAC 3, USB-C is the audio input; the RCA and rear 4.4-mm connections described in the manual are analogue outputs.

    Before you buy, identify each connection as a digital input, headphone output or line output.

  • Overlooking the power supply and volume control

    According to the manufacturer, the FiiO K11 needs DC 12 V/2 A. The optional 5 V power supply for the iFi ZEN DAC 3 isn’t included. In “Fixed” mode, control of the rear output is bypassed.

    Check the required power connection and what’s included in the box. If you’re connecting active speakers, decide in advance which device you’ll use to control the volume.

Which brands and product ranges are worth considering?

FiiO

The desktop K11 is an example of a DAC for a computer, with the option to connect another digital audio source.

  • According to FiiO, the K11 has USB, optical and coaxial inputs, as well as 6.35- and 4.4-mm headphone outputs.
  • The supported sample rate depends on the input. The K11 needs DC 12 V/2 A and isn’t a battery-powered option.

iFi audio

The ZEN DAC 3 is a USB-C DAC with headphone outputs and the option to connect analogue audio devices; the xDSD Gryphon is a separate, portable option for multiple sources.

  • According to the ZEN DAC 3 manual, it has 6.35- and 4.4-mm headphone outputs, as well as fixed or variable analogue outputs.
  • “Fixed” bypasses control of the rear output; the optional 5 V power supply isn’t included, according to the manual. iFi lists USB, S/PDIF and Bluetooth inputs for the xDSD Gryphon, not the ZEN DAC 3.

Creative

According to Creative, the Sound Blaster G8 is designed for setups with two USB audio devices active at the same time.

  • Creative describes this model as having two USB-C audio inputs, mixing capabilities and playback up to 32 Bit/384 kHz.
  • This feature is designed for two separate USB audio sources. It isn’t needed just because a computer is running two monitors.

Chord Electronics

The Mojo 2 is a portable DAC headphone amplifier for people who may want to connect optical or coaxial audio sources as well as USB.

  • Chord lists USB-C, Micro-USB, optical and coaxial digital inputs, as well as 3.5- and 4.4-mm headphone outputs, for the Mojo 2.
  • Check that the connections and power supply match the specific version of the device on offer.

Joybuy products for PC audio and other sources

This selection is suited to PC playback and connecting additional digital audio sources. Before buying, check that the inputs match the output on your additional source.

Nobsound Q4 USB DAC with headphone amplifier

Nobsound Q4 USB DAC with headphone amplifier

For a PC setup where you want to connect additional digital audio sources as well as USB playback. Check that their output types match the device’s inputs.

The product title lists an optical input, Bluetooth, a remote control and playback up to 24 Bit/192 kHz. According to the product information, a connected USB drive takes priority over Bluetooth; you’ll need to unplug the drive to use Bluetooth.

The device uses an external DC power supply. Use only a compatible power supply.

View at Joybuy

Frequently asked questions

Do I need a second DAC input because I have a second monitor?

No, not just because you have a second monitor. First check which device is playing the file and which audio output is selected. In Windows, Microsoft recommends selecting your preferred device under “System > Sound > Output” when several output devices are available.

Can my Mac play Hi-Res files without an external DAC?

It depends on the Mac model and the output you’re using. Apple lists a built-in hardware DAC supporting up to 96 kHz in certain compatible Macs. This doesn’t mean the same specification applies to every Mac or Windows PC.

What should I bear in mind when connecting devices and adjusting the volume?

Start at a low volume and check that the output is suitable for your headphones. The iFi ZEN DAC 3 manual warns against changing the PowerMatch setting at high volume. The World Health Organization points out that both volume and listening time affect the risk of hearing damage.

What should I check about the power supply and consumer rights when buying in Germany?

Check whether any required power supply is included: the optional 5 V power supply for the iFi ZEN DAC 3 isn’t included, according to the manual, and the FiiO K11 needs DC 12 V/2 A. Section 438 of the German Civil Code (BGB) generally sets a two-year limitation period for claims relating to defects in ordinary purchased goods, starting from delivery. Any exceptions and the specific terms of your contract should be considered separately.

What should I check in the product documentation and when disposing of a device?

Check the information and documentation for the specific version of the device. The German Federal Network Agency lists correct CE marking, product identification and manufacturer details among the points considered in market surveillance; this doesn’t automatically confirm that a particular product listing is compliant. According to the German Environment Agency, a DAC that’s reached the end of its life shouldn’t go in household rubbish; it should be taken to a separate collection point for waste electrical equipment.