Which setup is right for you?

Comparing recordings on a PC

If you listen to the same passages repeatedly, make sure you have the right connection and match the volume for every comparison.

Using several headphones at once

Separate volume controls are useful when several people are listening to the same stereo source. Also check that the outputs are suitable for the headphones in question.

Switching between headphones and in-ear monitors

If your headphones have different connection and volume requirements, look for suitable outputs and start at a low volume after switching.

What should you look for when buying?

Compact USB DAC with headphone amplifier

Suitable if: You mainly play recordings on a computer and want a DAC and headphone amplifier in a compact footprint.

The trade-off: Several sockets don’t necessarily mean you can adjust the volume of separate comparison channels independently; check the specifications for the output you’ll be using.

Analogue single-listener amplifier

Suitable if: Your source already outputs an analogue stereo signal and you’re looking for a compact device for one listening position.

The trade-off: An analogue amplifier doesn’t convert USB audio. If your source is a digital PC, you’ll need a suitable converter before it.

Headphone splitter

Suitable if: Several people want to listen to the same analogue stereo recording at once, with the volume adjustable for each output.

The trade-off: A splitter isn’t automatically a USB DAC, and separate volume controls don’t replace matching listening levels.

DAC with separate headphone and IEM outputs

Suitable if: You regularly switch between headphones and sensitive in-ear monitors and want to use outputs designed for each.

The trade-off: For a controlled comparison, sound features such as EQ or crossfeed need to be set consistently or switched off.

What to consider What to look for Who this matters to most
Volume and sound comparison Check the specifications for the output you’ll be using, and keep the recording, settings and listening volume consistent. If I want to compare recordings or headphones as fairly as possible, I carefully match the volume; around 31 % of consumers put keeping comparisons as consistent as possible first.
Several headphones Check which outputs you need, whether they have separate volume controls and how to connect the shared source. If several listeners want to use the same stereo source at once, separate controls and suitable outputs are essential; around 25 % of consumers prioritise listening with multiple headphones.
Space and connections Measure the space available, including room for plugs, and check that the USB, digital or analogue input matches your source. If my desk has limited space, I want to avoid unnecessary devices and cables; around 25 % of consumers pay particular attention to footprint and easy PC connectivity.
Different headphones and earphones Compare the plug and the manufacturer’s impedance and sensitivity specifications with those of the output you plan to use. If I switch between headphones and in-ear monitors, I need a suitable output and a cautious starting volume; around 19 % of consumers prioritise compatibility with different headphones and earphones.

Common buying misconceptions

  • Assuming four outputs mean four independent comparison channels

    The Behringer HA400 distributes one analogue stereo source to several headphones and lets you adjust the output volume for each separately. It doesn’t provide four different recordings.

    Before you buy, consider whether everyone will be listening to the same recording or whether you actually need to switch between different sources.

  • Overlooking output impedance when comparing sensitive headphones

    Pro-Ject specifies an output impedance of under 1 Ω for the Head Box S2, while Behringer gives approximately 80 Ω for the HA400. Headphones.com explains that output and headphone impedance can affect one another.

    Compare the specifications for the specific socket with those of your headphones, rather than choosing based on the number of connections alone.

  • Assuming the analogue Head Box S2 has a USB input

    The Pro-Ject Head Box S2 has an RCA input. The separately named Head Box S2 Digital has digital inputs; the two versions have different connections.

    Check the full model name and the inputs on the exact version before connecting it to your source.

  • Changing sound settings without realising during a comparison

    XBass+ on the iFi ZEN DAC 3, as well as EQ and crossfeed on the RME ADI-2 DAC FS, change the playback settings.

    Use the same deliberate settings for every comparison, and start at a cautious listening volume after switching.

Brands and product ranges at a glance

FiiO

The K11 is a compact DAC/headphone amplifier for digital sources at your desk.

  • FiiO lists USB-C, optical and coaxial inputs, plus 6.35 mm and 4.4 mm headphone outputs.
  • The number of sockets doesn’t prove that the volume for two headphones can be adjusted independently. Output specifications vary between sockets.

Pro-Ject

The Head Box S2 is designed for existing analogue sources; the Head Box S2 Digital is a separate version with a DAC.

  • Pro-Ject says the analogue S2 has 3.5 mm and 6.35 mm sockets that can be used at the same time, with an output impedance under 1 Ω.
  • The analogue S2 has no USB input. According to its product specifications, the S2 Digital has USB, optical and coaxial inputs, but only one headphone output on the front.

Behringer

The HA400 is aimed at people who want to share one analogue stereo source between several headphones.

  • Behringer lists four outputs, each with its own volume control, in a compact unit.
  • The manufacturer’s stated output impedance of approximately 80 Ω is worth checking if you want to compare some sensitive headphones without changing their sound as much as possible. The HA400 doesn’t convert USB audio.

iFi audio

The ZEN DAC 3 combines a USB DAC and headphone amplifier with a range of connections and settings.

  • The manual lists 6.3 mm and 4.4 mm headphone outputs, switchable gain and RCA outputs.
  • XBass+ changes the sound, so make sure it’s set deliberately and consistently when comparing. The manual says a separate 5 V power supply isn’t included.

RME

The ADI-2 DAC FS combines digital inputs with separate headphone and IEM outputs, as well as DSP features.

  • RME lists USB and digital S/PDIF inputs, as well as EQ, loudness and crossfeed.
  • These settings need to be taken into account for a controlled comparison. Two sockets alone don’t prove that there’s an independent, simultaneous A/B mode.

Joybuy products for your desk

Here you’ll find devices for USB playback from a PC, as well as compact amplifiers for an existing analogue source.

Nobsound Q4 USB audio DAC with headphone amplifier

Nobsound Q4 USB audio DAC with headphone amplifier

Described as a USB audio DAC with headphone amplifier for PC use; keep the sound controls set consistently when comparing recordings.

Features listed in the product title: Bluetooth, optical input, 24-bit/192 kHz, treble and bass controls, and remote control.

View at Joybuy
Douk Audio T4 PRO Mini Valve tube headphone amplifier

Douk Audio T4 PRO Mini Valve tube headphone amplifier

Positioned as a compact analogue amplifier for one listening position; bear in mind that the tubes are described as adding extra character to the sound if you want to compare recordings with as little change as possible.

The product title lists an MM phono preamplifier and a headphone amplifier.

View at Joybuy

Frequently asked questions

How can I compare two recordings as fairly as possible?

Use the same headphones and listening chain, keep sound processing consistent and match the listening volume. Headphones.com describes level matching as part of professional comparison processes; using a particular amplifier socket doesn’t guarantee it.

Can I connect an analogue headphone splitter directly to my PC via USB?

Not with the Behringer HA400, as it needs an analogue stereo source. For USB playback, you’ll need a suitable audio output or DAC beforehand; the FiiO K11, by contrast, has its own USB-C data input.

What should I bear in mind when switching to sensitive in-ear monitors?

Start at a low volume and check the settings for the output you’re using. In the ZEN DAC 3 manual, iFi warns against switching PowerMatch without first turning the volume down. The World Health Organization recommends limiting volume and listening time together.

What are the rules in Germany for cancellations and faulty goods?

When you buy online from a trader in the EU, you generally have a 14-day right to cancel from the date of delivery. For new faulty goods, EU consumer information service Your Europe states that the legal guarantee lasts for at least two years; this is separate from a manufacturer’s warranty. These EU consumer rights don’t apply in the same way to purchases from private sellers.

Is CE marking required for every headphone amplifier?

No. It’s only required for products covered by harmonised EU rules that require CE marking. Electrical and electronic equipment may fall into this category; you’ll need to check which rules apply to the specific device and power supply. Your Europe explains that CE marking is the manufacturer’s declaration of conformity, not an independent assessment of sound quality.