Music listeners with demanding headphones
If you need more volume headroom, compare your headphones’ specifications with the power ratings for the amplifier output you’ll actually use. FiiO and JDS Labs provide figures for specific models and loads.
You don’t automatically need an extra headphone amplifier if your PC’s existing output can drive your headphones loud enough and without interference. If you need more volume headroom or the right connections, your choice depends on the signal path: a USB DAC with an amplifier connects to your PC digitally, while a dedicated analogue amplifier needs a suitable analogue signal to begin with. Also check whether you want to connect a microphone or active speakers, and what power supply the device needs.
If you need more volume headroom, compare your headphones’ specifications with the power ratings for the amplifier output you’ll actually use. FiiO and JDS Labs provide figures for specific models and loads.
If you also use your PC for calls, check that the device provides a suitable microphone connection. Creative says the Sound Blaster G8 has two USB-C audio inputs with mixing, while Schiit lists a microphone input on the Fulla E.
If you want to switch between headphones and active speakers, look for a suitable line or preamp output. FiiO, iFi audio and JDS Labs specify different types of output on their respective models.
A good fit if: The volume, controls and noise levels already work well with your headphones.
The trade-off: You won’t need an extra box or more cables, but you also won’t get any additional connections or power headroom.
A good fit if: You want to connect your PC via USB and plug your headphones straight in at your desk.
The trade-off: The USB input, headphone socket and power supply must suit your setup; a microphone input isn’t a given.
A good fit if: You already have a suitable DAC or analogue PC output, and mainly need more amplification or volume control.
The trade-off: You’ll also need a DAC for a direct digital USB connection.
When choosing a headphone amplifier for a desktop PC used for home working, your priorities depend on whether headphone power, the PC signal path, a microphone or speakers matter most.
| Priority | What to check before buying | Who it matters most to |
|---|---|---|
| Power for your headphones | Compare your headphones’ impedance and sensitivity with the output, load and test conditions used for the power rating. | If my headphones aren’t loud enough from my PC’s output, I want to assess the power available from the right socket and for the right load. Around 36 % of consumers say sufficient power headroom is their main priority. |
| PC connection and setup | Match the available PC output to the device input, and check whether USB power is enough or a separate power supply is required. | If I want a straightforward connection between my desktop PC and headphones, I’ll look for the right input and power supply. Around 29 % of consumers say PC connectivity and easy setup are their main priorities. |
| Microphone for calls | Check whether your microphone connects via USB or a headset socket, and whether the specific model supports that connection. | If I use my headset for work calls too, I need a suitable microphone connection as well as a headphone output. About 21 % of consumers put microphone integration first. |
| Connecting active speakers | Compare your speakers’ inputs with the available outputs, and check whether the output level is fixed or variable. | If I want to keep using my existing active speakers at my desk, I need a suitable output and volume control that works for my setup. Around 14 % of consumers say speaker integration is their main priority. |
A dedicated analogue amplifier takes an analogue signal and doesn’t replace a DAC. The JDS Labs Atom Amp 2 has analogue inputs; you’ll need a separate DAC for a digital USB connection.
Before you buy, map out the signal path from your PC to your headphones and check every input and output along the way.
Depending on your existing setup, you may need an extra DAC and connection cables.
The manufacturer’s figures for the FiiO K11 depend on the headphone output and the connected load. A single milliwatt figure therefore doesn’t describe its power across every socket and load.
Only compare figures when the output, resistance and test conditions match, and take your headphones’ specifications into account.
A headphone output doesn’t automatically mean you can connect your headset microphone too. Schiit explicitly lists a microphone input on the Fulla E.
Check the manual for the specific model to confirm its microphone connection, and check which plug your headset uses.
If the amplifier doesn’t have a suitable microphone connection, you may need a separate microphone solution.
The Atom products listed by JDS Labs include US power supply variants; this doesn’t tell you which version is included in a specific offer.
Before ordering, check the device and power supply version on offer, along with the seller and compliance information. For offers from outside the EU, Germany’s Federal Network Agency also recommends checking the shipping location and EU contact details.
According to the manufacturer, the K11 combines a desktop USB DAC with a headphone amplifier and several digital inputs.
According to the manual, the ZEN DAC 3 combines a USB DAC with headphone and other audio outputs.
With two USB audio inputs and a mixing function, the Sound Blaster G8 is designed for setups with multiple audio sources.
The Atom Amp 2 and Atom DAC 2 offer a separate analogue amplifier and USB DAC solution.
According to the manufacturer, the Fulla E combines USB audio and a headphone output with a microphone input for computer and communication use.
This selection includes an analogue amplifier for an analogue PC output and a USB DAC with a built-in headphone amplifier.
No image available
If your PC has an analogue 3.5 mm output, the listed AUX input is relevant; this model isn’t specified as having a digital USB audio input.
3.5 mm AUX input and 3.5 mm headphone output.
Supported headphone impedance range: 32–300 Ω; the stated output is 150 mW at 32 Ω.
Requires 12 V DC; a compatible power adapter is listed in the box contents.
No image available
If your desktop PC uses USB audio, the listed USB input is relevant; RCA outputs are provided for connecting an amplifier or active speakers.
USB, optical and coaxial inputs, as well as Bluetooth, are listed.
According to the description, the built-in headphone amplifier is designed for 16–300 Ω.
The product name specifies 24-bit/192 kHz; tone controls and a remote control are also listed.
Connect the designated USB audio input to your PC, plug in the separate power supply if required, and select the device as your audio output. The FiiO K11 lists USB-C for data and DC 12 V/2 A for power as separate connections; the iFi ZEN DAC 3 manual specifies USB-C for both audio and power. Turn the volume down before changing the gain settings.
Not necessarily, if you already have a suitable analogue output. For a direct digital USB connection, however, you’ll need a DAC: the JDS Labs Atom Amp 2 has 3.5 mm analogue and RCA inputs, while the separate Atom DAC 2 has a USB-C input.
According to the European Union’s consumer information, purchases of goods from a business seller are generally covered by a minimum two-year legal guarantee against defects from the date you receive them; a voluntary manufacturer’s guarantee doesn’t replace this. For a standard online distance purchase, you generally have a 14-day right to cancel from the date of delivery. Under the conditions set out there, the buyer may have to pay return costs when cancelling; exceptions and the seller’s status should be taken into account.
The applicable EU product rules apply; where required, the CE mark is the manufacturer’s declaration and isn’t an independent quality mark. Germany’s Federal Network Agency lists labelling, manufacturer details and German-language instructions with the necessary warnings among the points to check.
Waste electrical equipment must not go in your ordinary household rubbish; it should be collected separately. Take-back requirements are set out in the Electrical and Electronic Equipment Act.