Which digital microscope is right for you?

Get an overview of PCB tracks

If you want to follow the route of a PCB track before taking a closer look at a particular area, check the field of view and focus at both low and higher magnifications. Leica Microsystems highlights the benefit of a wider overview at lower magnification when inspecting printed circuit boards.

Work on the board with tools

If you need to get tools under the lens while inspecting or soldering, the working distance at your chosen magnification is crucial. BRESSER notes that the working distance of the DST-1028 decreases as magnification increases.

Inspect at your workbench without a PC

If you want to view the image directly on the device, compare models with a built-in screen against a USB microscope connected to your existing computer. For models with a screen, also check which outputs and features are included with the exact model variant.

What should you look for when buying?

Leica Microsystems recommends a wider overview at lower magnification for printed circuit boards. When choosing a microscope, consider the field of view and working distance alongside the way you actually work.

What matters What to check when buying Who it matters most to
Seeing PCB tracks in overview and detail Field of view at low magnification and focus for close-up detail; adjustable incident lighting. If I want to relate a particular area to the route of a PCB track, I first need a continuous overview, followed by a stable focus. Around 36% of consumers put getting an overview first.
Room for the board and tools Working distance at the magnification you want; adjustability and stability of the stand. If I want to work on or move the board with tools, there needs to be enough clear space under the lens. Around 29% of consumers say access for tools is their top priority.
Viewing the image at your workstation Built-in screen or USB connection; for USB, check compatibility with your computer and operating system. If I want to inspect components at my workbench without a PC running, being able to view the image directly on the device matters. Around 21% of consumers prioritise viewing without a PC.
Saving images of your findings Image capture method and storage medium; for PC software, compatibility with your computer. If I want to look at a particular area again later, I need to be able to save the image in a way that suits my workflow. Around 14% of consumers put documentation first.

Avoid common buying mistakes

  • Choosing solely on the highest magnification figure

    An overview is a useful starting point when inspecting PCB tracks. BRESSER quotes different working distances for the DST-1028 at 10x and 280x magnification; the higher figure alone doesn’t tell you how easy the microscope is to work with.

    Compare the field of view and working distance at the magnification you actually plan to use.

  • Choosing between USB and screen models based only on the connection

    A USB microscope such as the BRESSER DST-1028 is designed for viewing on a PC. With the Andonstar AD246S-M and AD249S-M, there’s a difference in whether the built-in screen also displays an image when using HDMI output.

    Check that the microscope’s connections are compatible with your computer and operating system. For models with a screen, check the exact model variant too.

  • Overlooking the stand footprint and space under the lens

    You may need less room for simple inspection than for soldering or moving the board. Magnification and lens choice affect the available working distance.

    Measure the space available for the board and stand, and check the working distance for the task you have in mind.

    An unsuitable stand may mean you need to buy a different one.

Key brands at a glance

BRESSER

The DST-1028 and Analyth LCD models suit different ways of working: viewing on a PC and using a microscope with a built-in screen.

  • BRESSER says the DST-1028 has adjustable LED incident lighting and PC software. The manufacturer quotes a working distance of 110 mm at 10x magnification and 10 mm at 280x.
  • According to the manufacturer, the DST-1028’s magnification figure is based on a full-screen image on a 27-inch monitor. It shouldn’t therefore be used as a straightforward optical comparison with other models.

Andonstar

According to the manufacturer, the AD246S-M and AD249S-M range combines a built-in screen with interchangeable lenses and a choice of connections.

  • The manufacturer lists an adjustable support and different focusing ranges depending on the lens.
  • According to the manufacturer, the AD246S-M displays an image on its built-in screen while outputting via HDMI; the AD249S-M displays the image only on an HDMI monitor. Check the variants and what’s included separately.

Plugable

According to the manufacturer, the USB2-MICRO-250X is a compact USB microscope supplied with a stand for viewing on a computer.

  • Plugable lists a 2-megapixel sensor, adjustable LED lighting and a stand included in the box.
  • According to the manufacturer, magnification is achieved through focus and working distance, not a zoom button. Check that it suits the type of view you need for your workflow.

Products to suit you at Joybuy

Related products will be available soon.

Frequently asked questions

Is the highest advertised magnification enough for inspecting a PCB track?

No. Start with an overview and then magnify the area you want to inspect more closely. Check what each manufacturer’s figure is based on, and how much field of view and working distance remain at that magnification. Figures for different types of microscope aren’t necessarily directly comparable.

What should I bear in mind when setting up and maintaining the microscope?

Make sure the board and stand are stable, adjust the incident lighting and focus to suit the area you’re viewing, and follow the instructions for your specific device. The Federal Institute for Occupational Safety and Health identifies the manufacturer’s instructions as an important source of information for consumers on intended use and warnings. The level of protection needed for ESD-sensitive components depends on their sensitivity.

Who can help if the microscope I bought online is faulty?

The seller is responsible for your statutory rights if the product is faulty. Any additional guarantee is voluntary and subject to its own terms. The Consumer Advice Centre says that, for online orders in Germany, you generally have a 14-day right to cancel from the date you receive your order. Before placing an order, check the seller’s details, returns information and any guarantee terms.

Is the CE marking an independent quality mark for image performance?

No. The European Union’s Your Europe website explains that CE marking is required only for products covered by relevant EU rules that specifically require it. It isn’t independent proof of image performance. For relevant electronic products, the Federal Network Agency checks aspects including markings, manufacturer details, instructions and the declaration of conformity.