When inspecting solder joints, the working distance at the magnification you actually use should leave enough room for the circuit board and, if needed, your tools. If you want to work without a PC, a model with its own screen is an obvious choice; if you need to save images for later comparison, check for image storage or PC compatibility instead. Adjustable lighting can help you deal with shiny solder, while a high maximum magnification alone tells you nothing about the usable field of view.
Which model is right for you?
For inspecting circuit boards with room to manoeuvre
If you want to check several solder joints or move the circuit board beneath the lens, working distance and field of view are important factors to consider. BRESSER and Andonstar provide model-specific information on working distances and stands.
For working at the inspection site without a PC
A built-in display lets you view the image directly on the device, for example at a workstation you use in different locations. TOMLOV and Andonstar describe screen models with different viewing options.
For saving images to compare later
Check whether you can capture images using compatible PC software or save them to the device's internal storage. BRESSER, Andonstar and TOMLOV list different image capture and storage features for the models described.
What should you look for when buying?
First, decide how much room you need beneath the lens and where you want the image to appear. Then consider whether the lighting and image storage options suit your day-to-day inspections, whether at your workbench or market stall.
| Priority |
What to check before buying |
Who should pay particular attention |
| Working distance and field of view |
Check the working distance at your preferred magnification, as well as the stand's height and stability. |
If I want to move the circuit board beneath the lens or rework it, I need room to manoeuvre and a stable stand. Around 33% of consumers say workspace is their main buying priority. |
| Viewing without a PC |
Check the built-in display, power supply, space required and, if needed, HDMI connection. |
At a changing inspection location, I want to see solder joints directly without having to keep a computer there. For around 27% of consumers, viewing without a PC is the main priority. |
| Lighting and reflections |
Check whether you can adjust the brightness and position of the lights. |
I want to make out details on shiny solder joints without reflections obscuring the image. Around 20% of consumers prioritise control over the lighting. |
| Image capture and storage |
Check the photo and storage features, as well as the operating system and storage method for the exact model variant. |
For later comparisons, I want to be able to save images rather than rely on the live view alone. Around 20% of consumers put image documentation first. |
Common misconceptions when buying
-
Assuming maximum magnification means there's enough room to work
For the BRESSER DST-1028 5MP, the manufacturer states a working distance of 110 mm at 10x magnification and 10 mm at 280x. At its highest setting, this model therefore leaves much less room beneath the lens.
Check the working distance and the area of the circuit board in view at the setting you actually plan to use.
-
Assuming HDMI, USB and image storage all do the same thing
The models differ in how they display and capture images: BRESSER lists PC software, Andonstar offers HDMI output and image capture features, while TOMLOV includes a screen and storage function.
Before buying, decide where you want the image to appear and whether you need to save it. Then check the connections, software and what's included for the exact model variant.
-
Assuming a visible solder joint proves electrical continuity
An optical inspection shows visible features, but it doesn't answer the same question as an electrical continuity test.
If you need to check continuity, use a suitable test instrument as well and follow its safety instructions.
A guide to manufacturers
The information below applies to the specific models and manufacturer details listed, not to every product range as a whole.
BRESSER
According to BRESSER, the DST-1028 5MP is a USB digital microscope for inspecting circuit boards and electronic components using a compatible PC.
- The manufacturer lists adjustable LEDs, image capture and measurement software, and support for Windows 10/11.
- The stated working distance ranges from 110 mm at 10x magnification to 10 mm at 280x. It isn't a standalone screen solution if you want to work without a PC.
Andonstar
According to Andonstar, the AD409 combines a 10.1-inch display with HDMI output, a metal stand and image capture functionality.
- You can view the image on the built-in display or on a compatible external monitor.
- The manufacturer says magnification of up to 300x applies when outputting to a 27-inch HDMI monitor, not to the built-in display alone.
TOMLOV
According to TOMLOV, the DM9 is a screen model for small circuit boards, hobby electronics and other detailed inspections.
- The manufacturer lists a 7-inch screen, metal stand, adjustable LED lighting with two side lights, and image storage.
- The advertised 1200x magnification alone doesn't tell you the working distance or how clearly a particular solder joint can be seen.
Suitable products on Joybuy
Related products coming soon.
Frequently asked questions
Is the highest stated magnification enough to help me choose?
No. According to the manufacturer, the working distance of the BRESSER DST-1028 5MP changes with magnification; Andonstar's maximum figure for the AD409 refers to a 27-inch HDMI monitor. So compare the working distance and field of view at the setting you plan to use.
How should I set up the microscope for repeat inspections?
Position the circuit board and stand so that the solder joints you want to inspect remain in view, then adjust the focus and lighting. If you want to rework the board while it's in place, check the space beneath the lens first; the working distance of the DST-1028 5MP depends on the setting.
Can a visual inspection replace an electrical test?
No. The microscope shows visible features of a solder joint; Fluke describes continuity testing as a separate measurement using a multimeter. Always follow the test instrument's safety instructions.
What are the rules on warranties and returns in Germany?
Your statutory rights if goods are faulty are separate from any voluntary guarantee. For online purchases by consumers, the Verbraucherzentrale generally states that you have a 14-day right to cancel, starting from the conclusion of the contract or receipt of the goods ordered. If you're buying for business purposes, check the terms that apply to your contract separately.
What compliance details should I check?
In its market surveillance guidance, the Bundesnetzagentur lists points to check including correct CE marking, an identifiable product and accurate manufacturer details. These general checks don't prove that a particular device has been independently tested.