Who should consider buying a DAC?

Listeners with a crowded desk

You want to listen to lossless music through wired headphones, but don’t want to use another socket for a DAC. USB power and a compatible headphone output are therefore key things to consider.

Listeners with specific connection needs

Your headphones need a particular plug or enough amplifier power. Check which output you can actually use and the conditions under which the power rating applies.

Listeners who move between listening spots

You want to use the same wired headphones with different source devices. You’ll need to choose between USB power and a battery-powered device.

What should you look for when buying?

Keep using your existing audio output

A good fit if: Your source device already plays the way you want through your wired headphones. Apple says an external DAC is required for certain Hi-Res tracks above 48 kHz on supported devices.

The trade-off: You don’t need any extra hardware, but you won’t gain any new connections or controls either.

USB-powered DAC dongle

A good fit if: You have a compatible USB port available and want a compact headphone output that doesn’t need a socket. The iFi GO link, for example, has a 3.5 mm output.

The trade-off: The dongle uses a USB port and draws power from the source device. Check that its output and operating conditions suit your headphones.

USB-powered desktop DAC

A good fit if: You want an accessible volume control or extra outputs at your desk without adding a separate power supply. iFi says the uno gets both audio and power over USB.

The trade-off: A desktop DAC takes up more space and needs more cabling than a dongle. The iFi uno manual says a driver download is required for PC use.

Battery-powered device with USB audio

A good fit if: You move between listening spots and sometimes want to listen without being connected to a power supply. Qudelix says the 5K can run on battery or USB power.

The trade-off: The battery needs charging. For lossless playback, check the wired signal path and don’t assume Bluetooth means lossless transmission.

Desktop DAC with its own power supply

A good fit if: You have a spare socket and need extra digital inputs, desktop controls or compatible headphone outputs. The FiiO K11 has USB, optical and coaxial inputs.

The trade-off: The FiiO K11 needs an external 12-V power supply. Power ratings apply only to the specified output and the conditions stated.

What you need What to check before buying Who is it important for?
Power without an extra socket Check the exact model’s power source and operating mode, as well as the USB port available. If there isn’t a spare socket where I listen, I want to power the DAC via USB and know which port it will use. Around 36% of consumers put power without an extra socket first.
The right headphone output Compare the plug, output and power conditions specified for your headphones. If my headphones need a particular plug or enough amplification, I want to find an output that’s actually compatible. Around 29% of consumers prioritise compatibility with their plug and amplification needs.
A lossless signal path Check the lossless setting and track quality, wired connection and source device requirements. If lossless playback matters to me, I want to make sure the source, file or streaming setting and connection all work together with the DAC. Around 21% of consumers put the signal path first.
Listening in different places Check battery operation, USB audio functionality, charging method, and compatible cables and outputs. If I listen in different places, I want to be able to choose between USB power and battery operation. Around 14% of consumers prioritise using their device in different listening spots.

Common misconceptions when buying a DAC

  • A Hi-Res rating guarantees lossless playback

    The DAC’s supported resolution alone doesn’t tell you whether the track is available in lossless quality or whether the playback setting is right.

    Before buying, check what your source requires and consider the entire signal path, rather than comparing only the maximum sample rate listed.

  • The highest power rating applies in every operating mode

    FiiO says the KA17’s higher power output in Desktop Mode is available only with sufficient USB power and the mode activated.

    Compare the ratings for the output and operating mode you actually plan to use, and check the load specified for each.

    An extra USB power connection can mean more cables where you listen.

  • Every desktop DAC works without its own socket

    Power requirements vary by model: the iFi uno draws power over USB, while the FiiO K11 needs an external 12-V power supply.

    Before choosing, check the power requirements of the exact model and make sure there’s a spare socket if it needs a power supply.

    A power supply uses a socket and takes up extra space where you listen.

Key brands to consider

iFi audio

The models mentioned range from the compact GO link to desktop devices such as the uno and ZEN DAC 3.

  • iFi says the uno gets both audio and power over USB; the ZEN DAC 3 is powered via USB-C and also has an optional separate 5-V power input.
  • The uno manual says a driver download is required for PC use. Suitability also depends on your source and headphones; this doesn’t mean it will always sound better.

FiiO

The KA17 is a compact USB DAC with a headphone amplifier; the K11 is a desktop unit with several digital inputs.

  • FiiO says the KA17 provides extra power in Desktop Mode when sufficient USB power is available.
  • The K11 needs an external 12-V power supply. Power ratings depend on the output and conditions specified.

Qudelix

The Qudelix-5K combines battery power with wired USB DAC operation.

  • Qudelix describes the 5K as supporting battery and USB power, as well as USB audio.
  • For lossless playback, check the specific wired signal path; Bluetooth doesn’t prove that transmission is lossless.

AudioQuest

The DragonFly Black v1.5 is a compact USB DAC with a headphone amplifier.

  • AudioQuest lists native decoding up to 24 Bit/96 kHz.
  • Being able to play a file doesn’t mean every resolution is decoded natively. AudioQuest says adapters are needed for certain mobile devices.

Creative

The Sound Blaster PLAY! 4 is a USB-powered DAC where the headset microphone connection also matters.

  • Creative lists USB bus power and a four-pole CTIA connector.
  • Check that it’s compatible with your source device. Communication features are a different consideration from listening to lossless audio alone.

DAC headphone amplifiers at Joybuy

The selection below includes a desktop DAC headphone amplifier with its own power supply. If you’re short on sockets, it’s only suitable if you have one available and need its extra inputs or controls.

Nobsound Q4 USB audio gaming DAC with Bluetooth headphone amplifier

Nobsound Q4 USB Audio Gaming DAC with Bluetooth Headphone Amplifier

The Q4 is worth considering as a desktop DAC headphone amplifier if you can make use of its extra inputs and controls and have a spare socket.

The product name lists 24 Bit/192 kHz; the product description lists USB and U-disk playback of lossless formats, as well as optical and coaxial inputs. The headphone amplifier is rated for 16–300 Ω.

The device needs an external DC power adapter. A high DAC resolution rating alone doesn’t guarantee that the source, file and connection are lossless.

View at Joybuy

Frequently asked questions

Do I always need an external DAC for lossless music?

No, not always. Apple also lists wired playback through supported devices; an external DAC is required for tracks above 48 kHz with the iPhone, iPad and Mac setups specified by Apple. So start by checking your source and the resolution you want.

How do I set up Apple Music for wired lossless listening?

In the audio quality settings, turn on “Lossless Audio” and choose the quality you want for streaming and downloads. Apple says tracks already downloaded need to be downloaded again in the lossless version.

Does a USB DAC need a driver on a PC?

It depends on the exact model and operating system. The iFi uno manual says a driver download is required for PC use; that doesn’t mean all USB DACs need a driver.

What are my rights if I need to return an online purchase or the item is faulty in Germany?

For a typical online purchase from a trader, you generally have a 14-day right to cancel, starting from delivery; exceptions and possible return costs should be taken into account. If goods are faulty, you generally have a statutory warranty of at least two years against the seller. This is separate from any voluntary manufacturer’s guarantee.