Which reader suits which user?

microSD users short on space

If you’re copying footage from a single drone microSD card to a computer, a compact plug-in reader can keep cables off your desk. The key is having a suitable, accessible USB port with enough clear space around it. DJI Support explains how to export drone footage using a microSD card and card reader.

Users switching between devices and cards

If you switch between devices with USB-A and USB-C, or also use SD cards, check the connectors and card slots together. A reader with several connector types or formats can make switching easier, but it will still occupy a port on your device. UGREEN lists this combination for model 50706.

Frequent copiers with a UHS-II card

For larger transfers using a UHS-II card, consider the card, reader and destination device as one complete transfer path. The SD Association distinguishes between UHS bus interfaces, while manufacturers’ maximum speed claims also depend on the card and system.

What to look for when buying

When copying drone footage in a tight space, start by matching the card format to the connection on your destination device. Then choose a suitable design based on the port’s position, the card standards you actually use and how you check your files.

What matters What to check when buying Who it matters to most
Card and connection compatibility Check the card format and whether the reader has a microSD or SD slot; make sure it matches the USB-A or USB-C port on your device. If I want to read a drone microSD card directly on my computer, the card and connection need to be compatible. Around 33% of consumers prioritise compatibility.
Space and ease of use Consider the clearance around your USB port and whether you have room for a cable or to swap cards at your desk. If there’s little free space on my small desk, I don’t want to have to position a cable awkwardly or block a neighbouring port. Around 27% of consumers focus primarily on space and ease of use.
Transfer speed Check the UHS marking on your card, the standard supported by the reader and the data connection on your device. If I’m copying large collections of footage with a compatible UHS-II card, I don’t want to create an avoidable bottleneck in the transfer path. Around 20% of consumers prioritise speed.
A transfer you can check Only choose extra card slots if you use several card formats; check the copied files before using the original card again. If I’m reading several cards or want to check my footage before deleting it, I need a transfer process I can follow and verify. Around 20% of consumers put this first.

Avoid common buying mistakes

  • Assuming USB-C means fast card transfers

    The card standard, reader and destination device all play a part in the transfer path. A manufacturer’s maximum speed isn’t a guaranteed copy speed for your setup.

    First, check the markings on your card and compare them with the standards explicitly listed for the reader and destination device.

  • Assuming an SD slot accepts microSD cards directly

    SD and microSD are different card formats. An SD slot doesn’t automatically accept microSD cards directly.

    If you want to insert your drone card without an additional adapter, choose a model that explicitly lists a microSD slot.

  • Focusing only on the reader’s size

    A plug-in reader sits directly in your device’s port; a cabled reader needs somewhere to rest. The better design for you depends on the position of the port and the space on your desk.

    Before buying, check nearby ports, where the card will sit and how much room there is for the connector or cable.

  • Assuming a completed copy means your files have been checked

    A card reader transfers files, but it can’t confirm on its own that the videos you need are complete and usable on the destination device.

    Open the destination folder and check the videos you need before using the original card again. On Windows, Microsoft recommends safely ejecting external storage before disconnecting it.

Key brands at a glance

SanDisk

According to SanDisk, the MobileMate SDDR-B531-GN6NN is a compact USB-A reader for one microSD card.

  • SanDisk lists USB 3.0 and backwards compatibility with USB 2.0.
  • This model isn’t listed with a USB-C connector or SD slot. The advertised speeds of up to 170 MB/s apply under the manufacturer’s stated conditions.

UGREEN

The 50706 card reader, described on the manufacturer’s European website, combines USB-A and USB-C with SD and microSD slots.

  • UGREEN lists UHS-I support and simultaneous access to SD and microSD cards for this model.
  • These details apply to the 50706. Check the model number of a specific listing before assuming it has the same features.

Kingston

The MobileLite Plus microSD is designed for microSD cards and a destination device with USB-A.

  • Kingston lists UHS-II, backwards compatibility with UHS-I, USB 3.2 Gen 1 and dimensions of 36,6 × 20 × 7,5 mm.
  • The model is listed as a microSD reader; an SD slot isn’t specified.

Lexar

According to Lexar, the Professional USB-C Dual-Slot Reader is designed for SD and microSD cards, including UHS-II cards.

  • Lexar lists two card slots and speeds of up to 312 MB/s, depending on the system and card.
  • The manufacturer’s figure isn’t an independent real-world test and won’t apply to every card or setup.

BENFEI

The SD 4.0 Card Reader is described as connecting via a USB-C/USB-A cable and offering SD and microSD slots.

  • BENFEI lists UHS-II support and speeds of up to 312 MB/s.
  • The manufacturer notes that actual speeds depend on the card and USB connection.

Anker

The 565 USB-C Hub is an alternative if you need additional connections as well as SD and microSD slots.

  • Anker lists additional data and other connections for this hub.
  • The advertised data rates for other USB ports don’t indicate the speed of the card slots.

Card readers and hubs at Joybuy

This selection includes card readers and USB-C hubs with card slots for different card formats and connection setups. The right design for you depends on whether you use SD as well as microSD, and which connection your destination device has.

Acer 7-in-1 USB-C Hub Docking Station ODK6V0

Acer 7-in-1 USB-C Hub ODK6V0

A good fit if you need extra connections at your desk as well as a way to import files from cards.

The title lists SD and TF card readers, HDMI with 4K@30Hz, 100W PD Charging and 3 × USB 3.0 with 5Gbps.

View at Joybuy
USB-C Hub 3-in-2 adapter with SD card reader

USB-C Hub 3-in-2 adapter with SD card reader

Worth considering if your destination device has a compatible USB-C or Lightning connection and you’re looking for a card reader adapter.

The product title lists an SD card reader; the product description also mentions a microSD/TF slot and USB-C and Lightning connection options.

View at Joybuy
4-in-1 USB-C card reader with USB-A for SD and microSD

4-in-1 USB-C card reader with USB-A

A good fit for a workflow where you want to use the same card reader with both USB-C and USB-A devices.

The title lists SD, microSD, TF and SDHC cards, as well as USB-C and USB-A.

View at Joybuy
HOCO HB45 Spirit 2-in-1 USB 3.0 card reader

HOCO HB45 Spirit 2-in-1 USB 3.0 Card Reader

Worth considering if you’re looking for a card reader for SD and TF or microSD cards, with a built-in USB-A connector.

The product title lists USB 3.0 and a 2-in-1 design.

View at Joybuy
Baseus Lite Series USB-A card reader for SD and TF

Baseus Lite Series USB-A card reader for SD/TF

A good fit if your destination device has USB-A and you need a card reader for SD and TF cards.

The product title lists USB-A and SD/TF.

View at Joybuy

Frequently asked questions

Does the card reader need to match my drone’s brand?

First, check the actual card format and the connection on your destination device. For drones with a microSD card, DJI Support describes removing the card, inserting it into a reader and then exporting the footage on a computer. This doesn’t mean you need a reader from a particular brand.

Is a UHS-II reader faster for every drone recording?

No. Any potential benefit depends on having a compatible card and a suitable transfer path. The SD Association distinguishes UHS-I and UHS-II as different bus interfaces, while Lexar notes that results depend on the system configuration and card speed.

Can I copy drone footage to an iPad?

Yes, provided your specific iPad supports the required connection or adapter and external storage device. Apple explains how to access a connected USB drive or SD card reader using the “Files” app. Check the connections before buying.

When can I unplug the card or reader after copying?

First, check that the files you need are in the destination folder and can be opened. On Windows, Microsoft recommends ejecting external storage using “Safely Remove Hardware and Eject Media” before disconnecting it.