Who might benefit from a dual monitor arm?

People working with dashboards and reports

If you need to see both at once, the best layout depends on the task. The German Social Accident Insurance Institution for Occupational Safety and Health points out that both your screen setup and your work matter.

People short on desk space

If you want to free up space by removing the monitor stands, check the desktop thickness, whether the desk edge is accessible and how much room there is behind the desk. Lenovo Germany describes desk clamps and grommet mounts as fixing options that vary by model.

People who read reports in portrait orientation

If you read longer documents alongside a dashboard, it may be important to have a monitor mount that rotates independently. DURABLE and Invision describe movable arms on selected dual monitor mounts; check that the report screen can be rotated separately.

What should you look for when buying?

First, check that the mount fits both monitors and your desk. Then consider how much movement you need to position your dashboard and report.

What matters What to check before buying Especially important if
Compatibility with both monitors VESA pattern, weight of each monitor and permitted screen size; spring arms may also have a minimum weight requirement. When I’m looking for a mount for both monitors, I want to know first whether the VESA pattern and weight are suitable for each screen. Around 31% of consumers put compatibility first.
Positioning both screens together Check independent adjustment, reach and height adjustment against the size and position of your screens and desk. If I want my dashboard and report to stay visible side by side, I need to be able to position both screens in relation to each other. Around 31% of consumers put this consideration first.
Fixing and available space Check the desktop thickness, desk edge or existing grommet hole, as well as the space behind the desk for the arm to move. If desk space is limited, I’d first check whether the fixing will work with my desk edge and leave enough room for movement. Around 23% of consumers prioritise the desk fixing.
Reports in portrait orientation Check for a mount that rotates independently, and make sure there is room for the screen, cables and second monitor. If I’m reading longer reports, I want to rotate the screen showing the document while keeping the dashboard in landscape orientation. For around 15% of consumers, portrait orientation is the top priority.

Common buying mistakes

  • Comparing screen size alone

    A suitable screen size in inches doesn’t guarantee that the VESA pattern and weight of both monitors are compatible with the mount. Spring arms may also have a minimum weight requirement.

    Compare the specifications for each monitor with those for the exact version of the mount.

    Also check whether you’ll need any additional compatible fixing parts for your specific setup.

  • Assuming every desk clamp will fit

    Clamping ranges vary by model. For certain hollow-core desks, ARCTIC recommends a reinforcement plate for the Z2 (Gen 3) to help prevent clamp damage.

    Measure the desktop thickness and desk edge, and follow the fitting instructions for the exact version.

    Depending on your desk, you may need a suitable reinforcement plate or a different type of fixing.

  • Expecting every dual monitor mount to have two independently adjustable arms

    A shared pole or crossbar may be enough for a setup that stays mostly in one position, but it won’t necessarily offer the same independent adjustment as two separate arms.

    Before buying, think about how often you’ll want to adjust the height, spacing or orientation of each screen individually.

Notable brands and models

DURABLE

The SELECT and SELECT PLUS models offer a pole design and a version with more flexible arms respectively.

  • DURABLE specifies that the SELECT supports monitors up to 27 inches and 8 kg each, with a desktop thickness of 10–88 mm. For the SELECT PLUS, the manufacturer specifies monitors up to 32 inches and 8 kg each, with a desktop thickness of 10–50 mm.
  • These specifications apply to the models listed and shouldn’t be assumed to cover every monitor mount from the brand.

Invision

The MX400 is a dual spring arm that lets you position each screen separately.

  • Invision specifies that the MX400 supports screens measuring 19–32 inches, with VESA 75 × 75 or 100 × 100 mm and a weight of 2–9 kg per arm.
  • With spring arms, minimum weight and available range of movement matter. These specifications are from a UK product page; check the exact version you’re considering.

ARCTIC

The Z2 (Gen 3) is a dual monitor mount with a USB 2.0 hub, designed for a setup that mostly stays in one position.

  • ARCTIC specifies VESA 75 × 75 and 100 × 100 mm, with a desktop thickness of 20–60 mm. According to the datasheet, the maximum width of 880 mm applies when two equally wide monitors are in landscape orientation.
  • Check the layout separately if your screens are different sizes or rotated. Also confirm the permitted load for the exact version before getting close to its weight limit.

Ergotron

The LX Dual Side-by-Side Arm 45-491-216 is designed for two side-by-side monitors, with arms that move independently.

  • For the white version, Ergotron specifies support for two screens up to 27 inches and weighing 3,2–9,1 kg each.
  • The weight capacity may be lower if a screen is more than 8,9 cm deep. The specifications are from a product page localised for Canada.

HUANUO

The HNDS6 is a dual arm with a clamp or grommet mount and individually rotatable monitor plates.

  • The US manufacturer’s website specifies screens measuring 13–32 inches and weighing 4,4–19,8 lb per arm.
  • Check the specifications and fixing options for the exact version you’re considering.

Joybuy products for two monitors

This selection includes dual arms that let you position each screen separately, as well as a monitor stand with adjustable width for two side-by-side monitors.

AOKCOS dual monitor arm with shelf, 12–27 inches

AOKCOS dual monitor arm with shelf, 12–27 inches

Worth considering if you want to position your dashboard and report differently; according to the product description, the monitors can be tilted, swivelled and rotated.

For monitors measuring 12–27 inches with VESA 75 × 75 or 100 × 100 mm; maximum 10 kg per arm.

The product also includes a shelf.

View at Joybuy
AOKCOS dual monitor mount with wooden shelf, 12–27 inches

AOKCOS dual monitor mount with wooden shelf, 12–27 inches

An option if you want your dashboard and report on a shared shelf while still being able to position them differently.

For monitors measuring 12–27 inches with VESA 75 × 75 or 100 × 100 mm; maximum 10 kg per arm.

The product description specifies tilting, swivelling and rotating arms, plus a wooden shelf.

View at Joybuy
Floordirekt monitor stand for two monitors, adjustable width, black

Floordirekt monitor stand for two monitors, adjustable width, black

Worth considering if your monitors will mostly sit side by side and you want to angle each platform independently.

According to the product description, the width adjusts from 80 to 108 cm; the height is fixed at 10,4 cm.

The stated material is MDF.

View at Joybuy
Floordirekt gas spring dual monitor arm for two monitors, 15–32 inches, black

Floordirekt gas spring dual monitor arm for two monitors, 15–32 inches, black

Worth considering if you want to position your dashboard and report differently and choose between a desk clamp and a grommet mount.

For monitors measuring 15–32 inches with VESA 75 × 75 or 100 × 100 mm; 2–10 kg per monitor.

The product description specifies tilt, swivel and 360° rotation.

View at Joybuy

Frequently asked questions

Is the screen size in inches enough to check whether two monitors will fit a mount?

No. For each monitor, also compare its VESA pattern and weight with the specifications for the exact mount. Spring arms may also have a minimum weight requirement.

Do my dashboard and report need to be in the same orientation?

No. If you want to read a report in portrait orientation, choose mounts that rotate independently and check that both screens will fit without touching when positioned this way. A laboratory study by the German Social Accident Insurance Institution for Occupational Safety and Health looked at both two horizontal screens and a horizontal-vertical combination. It doesn’t mean that one layout will suit every workspace.

How can I avoid damaging my desktop?

Check that the desktop thickness falls within the clamp’s range and follow the fitting instructions. For certain hollow-core desks, ARCTIC recommends a reinforcement plate for the Z2 (Gen 3) to help prevent clamp damage. This recommendation applies to that specific model.

Does the ASR A6 workplace rule automatically apply to every home office?

No. The ASR A6 from the German Federal Institute for Occupational Safety and Health, published in July 2024, explicitly includes teleworking workplaces within its scope. It doesn’t automatically apply to all screen use in a private home. Whether a workspace counts as a teleworking workplace depends, among other things, on the agreement in place and the equipment provided. This doesn’t mean there is a general requirement to buy a particular monitor mount for private use.

What are my rights if a mount doesn’t fit or is faulty after an online purchase?

Consumers generally have a 14-day right to cancel an online purchase. The consumer advice centre distinguishes this from your statutory rights against the seller if an item is faulty. Check the specific returns conditions, and don’t confuse a voluntary manufacturer’s guarantee with your statutory rights.