Who is this monitor arm for?

Keep your calendar and email in view

If you want to see both applications side by side, look for a suitable layout and enough room for your screens. Research by the German Social Accident Insurance (DGUV) shows that the results of working with multiple screens depend on the task and screen configuration; it does not establish a general productivity benefit.

When power sockets are in short supply

If you have limited power sockets, plan how to power your monitors separately from the mount’s USB ports and cable management. According to the manufacturer, the ARCTIC Z2 (Gen 3) USB hub is intended for compatible USB devices.

Different monitors or desk surfaces

If you want to mount two monitors you already own, the weight, VESA size and mounting method must suit both screens and your desk. Manufacturer specifications apply to the specific model.

What should you look for when buying?

Dual arm without a built-in hub

A good fit if: you want to position two monitors that already have their own power supply side by side and free up desk space.

Consider: cable management keeps existing cables tidy, but it does not provide extra power sockets for your monitors.

Dual arm with USB hub

A good fit if: extra, easy-to-reach USB ports for suitable small devices would be useful and you have already sorted out how to power your monitors.

Consider: the manufacturer lists four USB 2.0 ports on the ARCTIC Z2 (Gen 3), with a maximum of 5 V and 500 mA. These specifications do not indicate that it can power two monitors.

Dual arm with independently adjustable arms

A good fit if: you want to adjust each screen independently when you change your seating position or switch tasks.

Consider: the manufacturer gives the Invision MX400 a load capacity of 2–9 kg per arm. Both monitors must fall within this range, and your desk must be suitable for mounting it.

What you need What to check before buying Who should pay particular attention?
Plan your power connections properly Check the power requirements of both monitors separately from the mount’s USB hub and cable management. If a lack of power sockets is your main concern, you’ll want to know whether the mount actually supplies power to your monitors. Around 26% of consumers rank this as their top priority.
View your calendar and email side by side Compare screen width, arm reach and the available space on your desk. If you want to see your calendar and email at the same time, a suitable layout matters more than frequently switching between windows. Around 26% of consumers prioritise having both in view.
Make sure both monitors fit Compare the weight without the stand and the VESA size of each monitor with the specifications for each arm. The manufacturer specifies up to 32 inches and 8 kg for the ICY BOX IB-MS314-T, and 19–32 inches and 2–9 kg per arm for the Invision MX400. If you want to mount both monitors you already own, the weight and VESA mount must be suitable for each one. Around 21% of consumers make this their priority.
Fit the mount to your existing desk Check the desk thickness, material and edge, as well as the requirements for a clamp or grommet mount. For the Z2 (Gen 3), ARCTIC specifies a thickness of 20–60 mm and recommends a reinforcement plate for certain hollow-core or sandwich panels. If your existing desk surface limits your mounting options, you’ll want to choose a fixing that suits its material and construction. Around 16% of consumers prioritise desk compatibility.
Adjust your screens frequently Check whether the arms adjust independently, their reach and the weight range for the specific model. Invision specifies a reach of up to 530 mm for the MX400. If you often reposition your screens, adjustability is important—provided you have enough room for the arms. Around 11% of consumers make adjustability their top priority.

Common buying mistakes

  • Assuming a USB hub can power your monitors

    According to the manufacturer, the ARCTIC Z2 (Gen 3) has four USB 2.0 ports, with a maximum of 5 V and 500 mA. These specifications do not indicate that it can power two screens.

    Plan the power supply for each monitor separately and check which connections they actually need.

  • Checking only the screen size

    Load capacity and VESA compatibility vary by model. For example, the Invision MX400 has a stated load capacity of 2–9 kg per arm, so monitors weighing less than 2 kg fall outside this range.

    Compare the weight without the stand and the VESA size of both monitors with the specifications for the exact mount you’re considering.

  • Not checking the desk before fitting a clamp

    Even if the monitor mounts are suitable, the clamp or grommet fitting may not be right for your desk. For certain hollow desk surfaces, ARCTIC recommends using a reinforcement plate with the Z2 (Gen 3) to avoid clamp damage.

    Depending on your desk, you may need a suitable reinforcement plate.

    Before buying, check the thickness and material of your desk, and make sure you can access a suitable edge or grommet hole.

Brands to consider

ARCTIC

The Z2 (Gen 3) combines a dual arm with a USB hub and cable management.

  • The manufacturer lists four USB 2.0 ports. The datasheet specifies a maximum of 5 V and 500 mA.
  • The USB hub is not specified as a power supply for monitors. For certain hollow desk surfaces, ARCTIC recommends a reinforcement plate; the stated desk thickness is 20–60 mm.

ICY BOX

The IB-MS314-T has a dual arm with detachable VESA adapters and can be attached with a clamp or through a desk hole.

  • The manufacturer specifies support for two monitors up to 32 inches and 8 kg, along with integrated cable management.
  • Cable management keeps cables tidy, but does not power your monitors.

Invision

According to the manufacturer, the MX400 is a gas-assisted dual arm for monitors measuring 19–32 inches and weighing 2–9 kg per arm.

  • The manufacturer specifies a clamp fitting or through-desk mount, with a reach of up to 530 mm.
  • The minimum weight of 2 kg per arm is just as important to check as the maximum, particularly for lighter monitors.

Hama

The 00220908 is a dual monitor mount with gas springs, clamp or drilled mounting, and independently movable arms.

  • For this model, Hama specifies monitors measuring 17–35 inches, a maximum of 15 kg per arm and a ten-year manufacturer’s warranty.
  • The load capacity and warranty apply to the 00220908, not to all Hama monitor mounts.

Ergotron

According to the manufacturer, the LX Dual Side-by-Side is designed for two screens positioned next to each other.

  • Its specified layout may be useful if you want your screens positioned side by side.
  • The product description alone does not confirm that it will fit your monitors or offer any benefit when it comes to powering them.

Monitor arms at Joybuy

This selection includes stands and dual arms that let you position two screens side by side. Check that each model suits your monitors and desk, and plan the power supply separately.

AOKCOS monitor stand for two monitors with shelf

AOKCOS monitor stand for 2 monitors, 12–27 inches, with shelf

If you want your calendar and email side by side, the product description says the two monitors can be positioned using independently adjustable arms.

The product name specifies 12–27 inches; tilt, swivel, rotation and height adjustment are also listed.

The description includes a shelf.

View at Joybuy
AOKCOS monitor stand for two monitors, tilt and swivel

AOKCOS monitor stand for 2 monitors, 12–27 inches

For a side-by-side setup, the description lists two adjustable monitor arms and an additional shelf.

The product name specifies 12–27 inches; according to the description, you can adjust the height, tilt, swivel and rotation.

View at Joybuy
Floordirekt monitor stand for two monitors, black

Floordirekt monitor stand for 2 monitors, 80–108 cm, black

If you want to place two screens side by side on a shelf, the description says the platforms swivel independently.

According to the description, the width adjusts from 80 to 108 cm; the height is fixed at 10.4 cm.

The product name specifies MDF and the black version.

View at Joybuy
Floordirekt gas-spring dual arm for two monitors

Floordirekt gas-spring dual arm for 2 monitors, 15–32 inches

If you want to position your calendar and email side by side and adjust your screens, the description lists gas springs, as well as tilt, swivel and rotation.

The product name specifies 15–32 inches; according to the description, it supports 2–10 kg per monitor.

The description lists a clamp or through-desk mounting as the available fixing methods.

View at Joybuy

Frequently asked questions

Can two monitor arms save you a power socket?

A dual monitor mount does not power your monitors. For the ARCTIC Z2 (Gen 3), the manufacturer describes a hub with four USB 2.0 ports and a maximum of 5 V/500 mA; this does not mean it can power two monitors. Check their power connections separately.

Can I fit a dual monitor mount to a hollow-core desk?

It depends on the desk and the mount. For the Z2 (Gen 3), ARCTIC recommends a reinforcement plate for honeycomb or sandwich panels with hollow cores to prevent clamp damage; the stated desk thickness is 20–60 mm.

What are my rights in Germany if I return an online purchase or find a fault?

For a typical online purchase of goods from a trader, you generally have 14 days from delivery to withdraw from the contract; exceptions and return costs may apply. If goods are faulty, you are generally entitled to at least two years of statutory protection against defects from the seller. The European Union distinguishes this statutory protection from a voluntary manufacturer’s guarantee.

Does ASR A6 also apply to my home desk?

Not simply because there is a screen on it. ASR A6 sets out requirements for workplaces and teleworking spaces within its scope; its application to private use outside these workplaces is expressly excluded. For a workplace, you should check whether the specific circumstances fall within its scope.