Who is a dual monitor arm suitable for?

Calendar-and-email multitaskers

If you use email as your main view, you can place your calendar alongside it and keep both in sight. The DGUV outlines the need to display multiple programmes at once; whether a particular setup helps depends on the task.

People who switch between sitting and standing

If you need to reposition both screens when changing your working position, look for easy-to-reach adjustment controls. The available range of movement varies by model.

People short on desk space

If you want to clear monitor stands from your desk, choose a mount that suits both your desktop and your screens.

What should you look for when buying?

What you need What to look for when buying Who will find this especially important
Positioning your calendar and emails Check whether each monitor can be positioned independently and that their width suits your preferred layout. If email is my main view, I want to see my calendar alongside it without constantly moving windows around. Around 33% of consumers say having two views they can use at the same time is their top buying priority.
Readjusting your setup when standing Compare the height range and reach with the space available, and check the permitted weight range for each arm. When switching between sitting and standing, I want to reposition both screens without fiddly adjustments. Around 25% of consumers prioritise frequent readjustment.
Fitting your monitors and desk Check the VESA pattern and weight of each monitor, then compare the clamp range and desktop construction with the installation instructions. Before fitting the mount, I want to be sure it will suit both my monitors and my desktop. Around 25% of consumers put monitor and desk compatibility first.
Keeping your desk clear If your setup tends to stay much the same, check whether a compact pole mount will do the job and whether the edge of your desk is accessible for the clamp. If my monitors usually stay in the same position, I want to free up desk space by removing their stands without paying extra for movement I rarely need. Around 17% of consumers prioritise a clear desk with a fixed monitor setup.

Avoid common buying mistakes

  • Choosing based on screen size alone

    The screen size in inches alone won’t tell you whether the monitor’s weight and mounting pattern are compatible with the arm.

    Check the weight and VESA pattern of each monitor against the specifications for the exact model.

  • Assuming a desk clamp and a grommet mount are interchangeable

    An unsuitable or hard-to-reach desk edge may prevent you from fitting the clamp as planned.

    Check the desk edge, desktop construction and what’s included for your preferred mounting method. The grommet mount for the Duronic DM15V2 is sold separately.

  • Assuming all height adjustments offer the same range of movement

    A height adjustment on a pole doesn’t automatically offer the same range of movement as a gas-spring arm with a specified height range.

    If you often reposition both monitors, compare the range of movement and independent adjustment options. For a fixed setup, a simpler pole mount may be enough.

Brands to consider

Ergotron

The LX Dual with tall pole is worth considering for an independently adjustable setup if you frequently change your monitor positions.

  • Ergotron specifies a load capacity of 3.2–10 kg per arm for two monitors on the LX Dual 45-549-026.
  • Adding arms for three or four monitors requires accessories and changes the permitted load per arm. These specifications apply to the model listed.

Invision

The gas-spring MX400 is designed for frequent changes of position.

  • Invision specifies a 260 mm height range, up to 530 mm of reach, VESA 75 × 75 or 100 × 100 mm, and a load capacity of 2–9 kg per arm for the MX400.
  • Monitors below the stated minimum weight are not covered by this model specification.

Duronic

The DM15V2 is a pole-mounted dual stand with height adjustment, suited to a more fixed setup.

  • Duronic specifies a maximum load of 8 kg per screen and a clamp for desktops 5–68 mm thick.
  • The arms are 10 cm long; the alternative grommet mount is sold separately.

ARCTIC

The Z2-3D (Gen 3) is a gas-spring dual arm with specifications covering monitor width and desktop construction.

  • ARCTIC specifies a maximum of 8 kg per arm and a desktop thickness of 20–65 mm. The maximum monitor width of 820 mm applies to two equally wide monitors in landscape orientation.
  • For desktops with hollow sections, the manufacturer recommends a reinforcing plate.

StarTech.com

The ARMDUAL2 adjusts in height along a pole and can be fitted with a clamp or grommet mount.

  • StarTech.com specifies support for two VESA 75 or VESA 100 monitors up to 32 inches and 8 kg per arm.
  • The height adjusts along a 39.8 cm pole; this is not the same as a specified independent height range for each arm.

Joybuy products for two monitors

The following Joybuy products are designed for two monitors, ranging from independently adjustable arms to stands for screens positioned side by side.

AOKCOS dual monitor stand with shelf

AOKCOS dual monitor stand, 12–27 inches, with shelf

For two monitors that you want to tilt, swivel and rotate independently.

Height adjustment from 120 mm to 927 mm; tilt ±40°, swivel ±80° and rotation 360°.

VESA 75 × 75 or 100 × 100 mm; maximum 10 kg per arm. Both monitors must fall within these specifications.

View at Joybuy
AOKCOS height-adjustable dual monitor stand

AOKCOS dual monitor stand, 12–27 inches

For two screens with independently adjustable arms, so you can position each view separately.

The product description specifies tilt, swivel and rotation for each arm.

VESA 75 × 75 or 100 × 100 mm and a maximum of 10 kg per arm; the stated monitor size is 12–27 inches.

View at Joybuy
Floordirekt gas-spring dual arm for two monitors

Floordirekt gas-spring dual arm, 15–32 inches

For two monitors that you want to reposition when changing your working posture.

The product description specifies tilt and swivel of ±90° each, plus 360° rotation.

VESA 75 × 75 or 100 × 100 mm; 2–10 kg per monitor.

View at Joybuy
Floordirekt black dual monitor stand

Floordirekt MDF dual monitor stand, black

For two monitors positioned side by side, with viewing angles that can be adjusted using the platforms.

Adjustable width from 80–108 cm; the side platforms swivel independently.

The height is fixed at 10.4 cm; no height adjustment for the stand is specified.

View at Joybuy

Frequently asked questions

Is screen size enough to find a compatible mount?

No. For both monitors, also compare the VESA pattern, weight and width with the specifications for the specific arm. VESA describes standardised mounting interfaces; the manufacturer sets the permitted loads and dimensions for each model.

Can I clamp a dual arm to any height-adjustable desktop?

No. Check the desktop thickness, construction and available space at the edge against the installation instructions. For desktops with hollow sections, ARCTIC recommends using a reinforcing plate with the Z2-3D (Gen 3) to prevent clamp damage.

What additional costs or warranties should I check?

Check whether any grommet mount you need is included: the one for the Duronic DM15V2 is sold separately. Invision specifies a two-year warranty for the MX400; check the terms and coverage of the specific offer. A manufacturer’s warranty is separate from your statutory rights regarding faulty goods.

Does German law require a particular monitor arm for every home standing desk?

The ASR A6 guidance reviewed does not generally require private users to have a particular monitor arm. The BAuA version from July 2024 sets out requirements for display screen workstations in workplaces and at teleworking locations; screen use outside these settings falls outside its scope. For a workstation set up in this way, employers’ duties and the specific working conditions should be assessed separately.