Who can benefit from a dual monitor arm?

People who review documents side by side

If you regularly compare two versions, you need a layout that keeps them close together and easy to read. For screens used equally, ASR A6 from the Federal Institute for Occupational Safety and Health and the Committee for Workplaces recommends placing them as close together as possible in your field of vision. This guidance applies to the workplaces covered by ASR.

People who share a hot desk

If several people use the same desk, independently adjustable arms can make it easier to reposition the monitors. The key is to check that the monitors and desk are compatible with the specifications of the particular model.

People with a delicate or shared desk

Consider whether a clamp, a desk grommet mount or a freestanding base is suitable for the desktop and the space available. Check which mounting options are permitted before fitting a monitor arm.

What should you look for when buying?

First, decide how you want the monitors arranged side by side. Then check adjustability and monitor compatibility, followed by which mounting options are allowed on the shared desk.

What you need What to check before buying Who is it most relevant to?
Compare two document versions easily Check that both of your monitors can be positioned close together in your preferred orientation. ASR A6 recommends this for screens used equally in workplaces covered by its guidance. If I’m comparing two versions as I work, I want both screens close together and easy to read. Around 31% of consumers prioritise being able to compare documents directly.
Adjust the screens for different users Compare the independent adjustment options and the space needed for the arms to swivel. ARCTIC and Neomounts list adjustable screens for their respective dual arms. If several people use the desk, I want to adjust the screen positions without a complicated setup. Around 25% of consumers prioritise being able to reposition their screens quickly.
Mount existing monitors Check each monitor’s weight and VESA pattern against the specifications of the particular model. Neomounts specifies 2 to 7 kg per screen for the DS70-750BL2; ARCTIC specifies a maximum of 8 kg per arm for the Z2-3D (Gen 3). If I want to keep using my existing screens, each one needs to match the VESA pattern and permitted weight range. Around 25% of consumers prioritise monitor compatibility.
Choose a suitable desk mount Measure the desktop thickness and the available space at the back edge; also check whether a desk grommet mount is allowed. The ARCTIC Z2-3D (Gen 3) is specified for desktops 20 to 65 mm thick, while the freestanding StarTech.com ARMDUALSS has a base measuring 300 × 520 mm. If the desk belongs to someone else or has a delicate surface, I want to use only an approved mounting method. Around 19% of consumers prioritise finding a mount that suits their desk.

Avoid common buying mistakes

  • Checking only the maximum screen size

    Screen size alone doesn’t tell you whether a monitor can be mounted on an arm. Both monitors’ VESA patterns and weights must fall within the specifications for the particular model; some gas spring arms also have a minimum load requirement.

    Note down the weight of each monitor without its original stand, along with its VESA pattern. Compare both with the model specifications and check whether an adapter is needed.

  • Assuming a clamp will automatically protect your desk

    A clamp isn’t suitable for every type of desktop. ARCTIC notes that clamping can put pressure on hollow-core desktops.

    Check the desktop construction and mounting instructions before choosing a clamp. ARCTIC recommends using a reinforcement plate with hollow-core desktops.

    Adding suitable reinforcement may mean extra work during installation.

  • Assuming a freestanding stand is the same as a clamp-mounted arm

    A freestanding dual stand takes up desk space. StarTech.com specifies a base measuring 300 × 520 mm for the ARMDUALSS.

    Mark out the base dimensions on your desk and check that you’ll still have enough room for your work essentials.

  • Assuming a desk grommet mount is included

    According to the manufacturer, the fitting for mounting the Duronic DM15V2 through a desk hole is sold separately.

    Check what’s included with the particular model and make sure your desktop is suitable for this type of fitting.

    A separate fitting is required to mount the DM15V2 through a desk hole.

Brands to consider

ARCTIC

The Z2-3D (Gen 3) is a dual gas spring arm that lets you position each monitor independently.

  • According to ARCTIC, it fits VESA mounts measuring 75 × 75 or 100 × 100 mm. The maximum load is 8 kg per arm, and the clamp fits desktops 20 to 65 mm thick.
  • The maximum monitor width applies when both monitors are the same width and positioned horizontally. ARCTIC recommends a reinforcement plate for hollow-core desktops.

Neomounts

The DS70-750BL2 is a dual gas spring arm with a choice of clamp or desk grommet mounting.

  • Neomounts specifies 2 to 7 kg per screen, VESA 75 × 75 or 100 × 100 mm, and a five-year manufacturer’s warranty. Check the warranty terms for the particular model.
  • Check the minimum load and the stated maximum screen size of 27 inches against the specifications of your monitors.

StarTech.com

The ARMDUALSS is a freestanding dual monitor stand; the separately available ARMDUALPIVOT attaches with a clamp or desk grommet mount.

  • For the ARMDUALPIVOT, StarTech.com specifies a maximum of 8 kg per screen and a desktop thickness of 10 to 48 mm.
  • According to StarTech.com, the ARMDUALSS needs a base measuring 300 × 520 mm. The specifications for these two models are not interchangeable.

Duronic

The DM15V2 is a pole-mounted dual monitor arm for setups where the screen arrangement is likely to stay much the same.

  • Duronic specifies VESA 75 or 100, a maximum of 8 kg per screen and a clamp that fits desktops 5 to 68 mm thick.
  • Each arm is 10 cm long. A separate fitting is required to mount it through a desk hole.

ICY BOX

The IB-MS314-T is a spring-assisted dual arm with removable VESA adapters and a choice of clamp or desk grommet mounting.

  • RaidSonic specifies that this model supports two monitors up to 32 inches, weighing up to 8 kg each, with VESA 75 × 75 or 100 × 100 mm.
  • These manufacturer specifications don’t prove that this mount is better than others; check that it suits your specific monitors and desk.

Joybuy products for two adjustable monitors

These products are designed for two monitors on arms that can be adjusted independently. Before buying, check the stated monitor sizes and weights, VESA mounts and suitable mounting options.

AOKCOS dual monitor arm for two 12–27-inch monitors

AOKCOS dual monitor arm for two 12–27-inch monitors

For two 12–27-inch monitors when you want to position each screen independently.

Supports up to 10 kg per arm; VESA 75 × 75 or 100 × 100 mm. Height, tilt, swivel and rotation are adjustable.

Joybuy
AOKCOS dual monitor arm with shelf for two 12–27-inch monitors

AOKCOS monitor arm with shelf, 12–27 inches

For two 12–27-inch monitors when you want to position each screen independently and make use of a shelf.

Supports up to 10 kg per arm; VESA 75 × 75 or 100 × 100 mm. The arms can be adjusted for height, tilt, swivel and rotation.

Joybuy
Floordirekt dual gas spring arm for two 15–32-inch monitors

Floordirekt dual gas spring arm, 15–32 inches

For two 15–32-inch monitors when you want the flexibility to adjust their positions.

The stated load range is 2–10 kg per screen; VESA 75 × 75 or 100 × 100 mm. Mounting options include a clamp and a desk grommet mount.

Joybuy
Floordirekt dual monitor stand for two monitors, 80–108 cm, black

Floordirekt dual monitor stand for two monitors, 80–108 cm, black

For two monitors when an adjustable stand width and swivelling side platforms suit your preferred layout.

The width adjusts from 80 to 108 cm. The stand height is fixed at 10.4 cm.

Joybuy

Frequently asked questions

How should I position two monitors to compare equally important documents?

Position the screens as close together as possible in your field of vision. ASR A6 from the Federal Institute for Occupational Safety and Health and the Committee for Workplaces describes this arrangement for screens used equally in workplaces covered by its guidance; it isn’t a workplace regulation that directly applies to a private desk.

Is the screen size enough to check whether a dual monitor arm will fit?

No. You should also check the VESA pattern and weight of each screen. For example, the Neomounts DS70-750BL2 is specified for 2 to 7 kg per screen; ARCTIC specifies a maximum of 8 kg per arm for the Z2-3D (Gen 3).

What should I check before mounting an arm on a shared desk?

Measure the desktop thickness and check whether a clamp or desk grommet mount is permitted on that desk. For the Z2-3D (Gen 3), ARCTIC recommends a reinforcement plate for hollow-core desktops; a freestanding stand is an option if there’s enough space for it.

Is a particular monitor arm required in a German office?

ASR A6 doesn’t require you to buy any of the models mentioned here. It sets out requirements for the screen-based workplaces covered by its guidance; it doesn’t mean that a particular type of mount is required for every private or workplace desk.