People using dashboards and reports
If you have two views open at the same time, a clear, easy-to-read side-by-side layout is important. Consider whether you use both views equally often or whether one is your main focus.
Choose a dual monitor mount based on the width and layout of both monitors, their VESA measurements and weight, and the mounting options available for your desk. If you often reposition your screens, independently adjustable arms are useful; for a fixed setup, a simple monitor stand may be enough. Screen size alone won’t tell you whether both housings will fit side by side or whether the mount will suit your desk.
If you have two views open at the same time, a clear, easy-to-read side-by-side layout is important. Consider whether you use both views equally often or whether one is your main focus.
If you regularly turn or move a screen, for example to read a long report in portrait mode, independently adjustable arms can be helpful. Check that both of your specific monitor housings can be positioned as you want.
A mount can free up desk space by replacing two monitor stands. Measure your desktop first and check whether a clamp or grommet mount will work with your desk.
First, check that both monitors and the mount will fit your chosen layout. Then compare the VESA measurements, weight of each screen and desk mounting options with the specifications for the exact model.
For workplace display screen equipment covered by ASR A6, the Federal Institute for Occupational Safety and Health recommends positioning screens used equally close together in the field of vision.
| What you need | What to check before buying | Who should pay particular attention |
|---|---|---|
| Positioning monitors side by side | Compare the width of the housings, your preferred orientation, arm reach and distance from the wall. | If I want to keep a dashboard and report in view at the same time, I need a layout that suits both housings. Around 33% of consumers say this is their most important buying consideration. |
| Making sure the mount fits both monitors | Check the VESA measurements and weight of each monitor without its stand; check the minimum and maximum load for each arm. | If I want to keep using two monitors I already own, each one must fall within the permitted weight range and fit the VESA mount. Around 27% of consumers put this compatibility check first. |
| Adjusting screens to suit your needs | Check whether you can adjust the height, tilt, swivel and rotation of each screen independently. | If I switch between tasks or portrait and landscape modes, independent adjustment matters to me. Around 20% of consumers prioritise this. |
| Attaching the mount to your desk | Measure the desktop thickness, edge and available space behind the desk; check the mounting method and what comes with the model. | If I want to fit the mount to my existing desk, the fixing must suit its shape and thickness. Around 20% of consumers consider this the most important mounting factor. |
Two monitors with the same screen size can have housings of different widths. Weight and VESA measurements also determine whether both will fit the mount.
Measure both housings. For each monitor, check its weight without the stand and its VESA mounting pattern against the specifications for the exact mount model.
Some models specify a minimum as well as a maximum weight for each screen. For example, Neomounts lists 2–7 kg per screen for the DS70-700BL2.
Compare the weight of each monitor with the full permitted range for its arm.
Mounting methods and permitted desktop thicknesses vary between models. An unsuitable desk edge could make your planned setup impossible.
Measure the desktop and edge, then check the fitting instructions and what’s included with the specific version before buying.
The DS70-700BL2 is a dual monitor mount with independently adjustable gas spring arms.
The LX Dual Side-by-Side Arm 45-491-216 is designed for two screens positioned next to each other.
The range includes dual mounts with gas springs, as well as other height-adjustable options.
The ARMDUAL3 is a dual-arm option with a C-clamp and positioning along a pole.
The IB-MS314-T is described as a dual monitor mount with detachable VESA adapters and clamp or grommet mounting.
This selection includes dual arms for independently adjustable screens, as well as a monitor stand with adjustable width for side-by-side use.
No image available
A good choice if you want to position two monitors independently for a dashboard and report.
For 12–27 Inch; VESA 75 × 75 or 100 × 100 mm; up to 10 kg per arm; height range 120–927 mm.
No image available
An option if you want to position two monitors differently for changing tasks.
For 12–27 Inch; VESA 75 × 75 or 100 × 100 mm; up to 10 kg per arm. The description also specifies a centre plate with a capacity of up to 5 kg.
No image available
A good choice if you want to reposition two monitors on gas spring arms when needed.
For 15–32-Inch monitors weighing 2–10 kg each; VESA 75 × 75 or 100 × 100 mm.
No image available
An option if you want to place two monitors side by side on a stand.
Adjustable width from 80–108 cm; MDF. The height is fixed at 10.4 cm and cannot be adjusted.
Arrange the screens to suit how you actually use them. For workplace screens used equally and covered by ASR A6, the guidance recommends positioning them close together in the field of vision. If one view is used much more often, the layout should suit your main task. This is not a general requirement for every home desk.
Check the instructions for the specific model to confirm the permitted load per arm, the VESA mounting and the desk fixing. Do not exceed the manufacturer’s load limit; StarTech.com’s instructions warn that overloading may cause injury or damage to property.
Check whether ASR A6 applies to your workplace display screen equipment or home-working setup. The Federal Institute for Occupational Safety and Health describes ASR A6 as setting out how requirements of the Workplace Ordinance apply to these workplaces; it does not generally require you to buy a particular dual monitor mount.
No. For consumer purchases in Germany, the seller is generally responsible for statutory rights relating to faulty goods. A manufacturer’s guarantee is an optional extra, subject to its own terms, as explained by the Verbraucherzentrale consumer advice centre.
For consumer contracts made online in Germany, you generally have a 14-day right to cancel. For ordered goods, the cancellation period usually starts when you receive them. The right to cancel and your rights relating to faulty goods are separate, as explained by the Verbraucherzentrale consumer advice centre.