Who is each option best suited to?

Working by a bright window

If reflections make your presentation or notes hard to read, adjusting the screen position may help. The Federal Institute for Occupational Safety and Health (BAuA) also recommends arranging your desk so that daylight falls on it from the side wherever possible. Sun protection may help too.

Mounting two existing monitors

If you want to keep using two displays, check the weight and VESA mount for each monitor, then make sure both are within the limits of the specific mounting model.

Keeping notes beside your presentation

If you usually need both tasks visible in the same place, consider whether a fixed layout will do or whether you need to adjust each screen independently more often. The German Social Accident Insurance’s IFA Report 5/2016 examined different layouts for office workstations.

What should you look for when buying?

Start with your two monitors and your desk. Once the weight, VESA mount and fitting method are right, you can compare the adjustment range and the layout you want.

What matters What to check before buying Who is this important to?
Positioning in daylight Check that both screens can move as needed on your actual desk, and factor in desk position and possible sun protection. If you want to reposition a screen depending on the light, adjustability matters. Around 36 % of consumers prioritise adapting their setup to light from a window.
Compatibility with both monitors Check the weight of each display without its stand, its VESA mounting holes and its dimensions against the specific model. If you’re mounting two existing monitors, each one must be within the model’s limits. Around 29 % of consumers first check that their monitors are mechanically compatible.
Fitting it to your desk For a clamp, check the desk thickness, edge and construction. For a freestanding stand, make sure there’s room for the base. If you can’t clamp or drill into your desk, choosing the right fitting method is essential. Around 21 % of consumers put compatibility with their existing desk first.
Positioning notes and your presentation Plan around the actual width of your screens and the usable desk space. Check the model’s height, reach and range of movement. If you want both tasks to remain visible side by side, the mount needs to support the position you want. Around 14 % of consumers prioritise this layout first.

Avoid common buying mistakes

  • Assuming screen size alone proves compatibility

    Two monitors with the same screen size can have different weights or VESA mounts. What matters is whether each monitor is within the limits of the model you choose.

    Check the weight and VESA mount of each screen against the manufacturer’s specifications. Only consider an adapter once you’ve confirmed it’s suitable.

    If the VESA mount doesn’t fit, you may need a suitable adapter.

  • Buying a desk clamp without checking the desktop

    Clamp ranges and suitable desktop constructions vary by model. For example, ARCTIC specifies a desk thickness of 20–65 mm for the Z2-3D (Gen 3) and recommends a reinforcement plate for hollow-core desktops.

    Measure your desktop and check its edge, underside and construction before you buy. If a clamp isn’t an option, consider whether a suitable freestanding stand would work instead.

    Some desktop constructions may require a reinforcement plate.

  • Assuming a monitor arm will solve all your problems with sunlight glare

    Changing the screen position can adjust your viewing angle, but it won’t automatically prevent inconvenient light from a window.

    Consider your desk position, side-on daylight and any blinds alongside the mount’s range of movement. The BAuA lists positioning daylight to the side and using sun protection as possible measures.

    Depending on your workspace, you may need additional sun protection.

Brands to help you choose

Neomounts

The models listed offer different options for two monitors: adjustable arms or a freestanding stand.

  • According to Neomounts, the DS70-810BL2 has adjustable arms, a 180° rotation stop and supports 1–9 kg per screen. It lists VESA 75 × 75 and 100 × 100 mm.
  • The DS70-810BL2 needs a suitable clamp or grommet mount. The freestanding DS45-600BL2 needs space for its base and is limited to 6 kg per screen.

ARCTIC

The Z2-3D (Gen 3) is a dual arm with gas spring support. Pay particular attention to your desktop and the dimensions of both monitors.

  • ARCTIC specifies a load capacity of 8 kg per arm, VESA 75 × 75 or 100 × 100 mm and a six-year manufacturer’s warranty.
  • The desk thickness should be 20–65 mm. According to ARCTIC, the maximum monitor width of 820 mm applies to two equally wide monitors positioned horizontally. The manufacturer recommends a reinforcement plate for hollow-core desktops.

Invision

The MX400 is a dual gas spring arm. Its stated reach and load capacity can help you plan a side-by-side view of your notes.

  • According to Invision, the MX400 supports 2–9 kg per arm, VESA 75 × 75 or 100 × 100 mm and reach of up to 530 mm.
  • It’s designed for a clamp or grommet mount. Check that it’s suitable for your desk construction.

HUANUO

The HNDS6 is an adjustable dual arm. Check the stated screen sizes and load capacity against each of your two displays.

  • HUANUO specifies that the HNDS6 supports two 13–32 Zoll screens weighing 4.4–19.8 lb per arm. It can be fitted with a clamp or grommet mount.
  • These specifications apply to the HNDS6. Also check that the fitting method is suitable for your desktop.

Joybuy products for two monitors

This selection includes freestanding dual monitor stands and a dual gas spring arm for a desk clamp or grommet mount.

AOKCOS monitor stand for two monitors with shelf

AOKCOS monitor stand for 2 monitors, height-adjustable, with shelf

Could work for a side-by-side presentation and notes setup, provided both monitors have compatible mounts and are within the weight limit.

The product title describes an adjustable-height, rotating design with a shelf. Check that both monitors have a VESA mount of 75 × 75 or 100 × 100 mm and are within the stated limit of up to 10 kg per arm.

View at Joybuy
AOKCOS monitor stand for two monitors, tilt and swivel

AOKCOS monitor stand for 2 monitors, tilting and swivelling, 12–27 Zoll

This adjustable design could be a good fit if you want to change the position of both screens and a freestanding stand suits your desk.

The product title describes an adjustable-height, rotating design for 12–27 Zoll screens. Check that both monitors have a VESA mount of 75 × 75 or 100 × 100 mm and are within the limit of up to 10 kg per arm.

View at Joybuy
Floordirekt monitor stand for two monitors, black MDF

Floordirekt monitor stand for 2 monitors, MDF, black, 80–108 cm

Could work for a side-by-side setup if a raised shelf is all you need and you don’t require adjustable height.

The product title specifies adjustable width and MDF. According to the product details, the height is fixed at 10.4 cm, so check that this position works for your workspace.

View at Joybuy
Floordirekt dual gas spring arm for two monitors

Floordirekt dual gas spring arm for 2 monitors, 15–32 Zoll

Could be a good fit if you want to adjust both screens and your desk can accommodate a suitable clamp or grommet mount.

Check that each monitor is within the stated load capacity of 2–10 kg and has a VESA mount of 75 × 75 or 100 × 100 mm. The desk needs a suitable edge for the clamp; alternatively, it must have a compatible grommet hole.

View at Joybuy

Frequently asked questions

Will a swivel mount alone help with a bright window?

It can change the angle of each screen, but that may not be enough. The BAuA recommends positioning your desk so that daylight falls on it from the side wherever possible. Blinds can help reduce distracting reflections. Check how well your setup works in your actual workspace.

How can I check the fitting before ordering?

For each monitor, check its weight without the stand and its VESA mounting holes against the exact mount model. If you’re using a clamp, measure your desktop too. For example, the ARCTIC Z2-3D (Gen 3) specifies 20–65 mm; this range doesn’t automatically apply to other models.

What should I bear in mind when adjusting and maintaining it?

After fitting, position both screens within the stated adjustment range. Regularly check that the mount and cable management still suit your chosen position. If you have questions about fitting, follow the instructions for the specific model.

Is a manufacturer’s warranty the same as your statutory rights?

No. If a product is faulty, you have statutory rights against the seller. A manufacturer’s warranty is an additional voluntary promise, subject to its own terms and conditions. When you buy as a consumer online, you also generally have the right to cancel, usually within 14 days of receiving the goods. The Consumer Advice Centre draws a clear distinction between statutory rights and a guarantee.

Are there regulations in Germany for screen work by a window?

For workplaces covered by the Workplace Ordinance, distracting glare and reflections must be avoided when setting up a screen-based workstation. ASR A6 sets out more detailed requirements for screen work. Whether these apply depends on your working situation; they don’t automatically apply to every home desk.