Who is a dual monitor mount suitable for?

Students with two monitors already

If you want to keep accounts and invoices in view at the same time, check the VESA pattern, weight and dimensions of both displays. ARCTIC, Invision and BONTEC list these as compatibility requirements for their dual mounts.

Students with limited desk space

If you also need room on your desk for paperwork, a suitable desk clamp can free up the area beneath your monitors. A freestanding base takes up desk space, so check the footprint too; ARCTIC and HUANUO list the mounting area or base dimensions as important measurements.

Students who regularly change their screen layout

If you need to position spreadsheets and invoices differently, both arms must be able to move within the space available. Invision, Hama and BONTEC describe their dual mounts as adjustable; check the range of movement for the specific model.

What should you look for when buying?

Dual arm with desk clamp

Suitable if: the desk edge is accessible and the desktop is compatible with the clamp on your chosen model.

Things to consider: desktop thickness and construction are crucial. For hollow-core desktops, ARCTIC recommends using a reinforcement plate with the Z2-3D (Gen 3).

Freestanding dual mount

Suitable if: a desk clamp isn’t an option and you have a sufficiently large, level surface for the base.

Things to consider: the base takes up desk space. HUANUO also advises against positioning the monitors too far beyond the centre of gravity of the CM1 base.

Through-desk mounting

Suitable if: your desk has a suitable opening and this type of installation is permitted for the desk.

Things to consider: this mounting method needs a suitable hole and desktop. If you’re renting, don’t drill a hole just because the mounting kit includes the hardware.

Criterion What to check before buying Who should consider this?
Compatibility with both monitors Compare the VESA pattern, weight without the stand and width of each display with the specifications for the exact mount model. If I want to mount both existing screens side by side, each one needs to be compatible with the mount. Around 36% of consumers prioritise compatibility.
Desk space and mounting Measure the desktop thickness, accessible edge and construction. For a freestanding model, also check the base footprint. If I want room to spread out invoices beside my monitors, I need a mounting option that fits my desk and leaves usable space. Around 29% of consumers focus above all on desk space and mounting.
Screen positioning Compare the height, horizontal reach and, where relevant, portrait orientation you need with the model’s range of movement. If I want to position spreadsheets and invoices differently, both displays need to remain movable within the space available. Around 21% of consumers say flexible positioning is their main priority.
Extra installation work Check what’s included, whether the desktop may need reinforcement, and the returns and warranty terms for the specific offer. If I want to avoid unexpected installation work or extra accessories, I’ll check what’s involved before buying. Around 14% of consumers put purchase and follow-on costs first.

Avoid common buying mistakes

  • Checking only the screen size

    Even a display within the stated size range may not fit the mount because of its VESA pattern, weight or width.

    Compare the specifications of each monitor separately with those listed for the complete mount model.

  • Assuming every desktop is suitable for a clamp

    Desktop thickness and construction can limit your mounting options. For its Z2-3D (Gen 3), ARCTIC recommends a reinforcement plate for honeycomb or sandwich desktops with hollow cores, to help prevent damage from clamping.

    Check the desk edge, desktop thickness and construction against the instructions for your chosen model.

  • Assuming ‘freestanding’ means ‘space-saving’

    A base takes up room that could be used for paperwork. HUANUO advises against positioning the screens too far beyond the centre of gravity of the CM1 base.

    Measure the base footprint and position the monitors as directed in the instructions for the specific model.

  • Confusing a warranty with your statutory rights

    A manufacturer’s warranty is a voluntary benefit; your statutory rights for faulty goods apply against the seller. German consumer advice centres highlight this distinction.

    Check the warranty terms and the seller separately before placing your order.

Key brands at a glance

ARCTIC

The Z2-3D (Gen 3) is a clamp-mounted dual gas-spring arm with a USB hub, provided your monitors and desktop meet the model’s requirements.

  • ARCTIC specifies VESA 75 × 75 or 100 × 100 mm, up to 8 kg per arm and a desktop thickness of 20 to 65 mm.
  • According to ARCTIC, the maximum monitor width of 820 mm applies to two monitors of equal width in landscape orientation. The manufacturer recommends a reinforcement plate for hollow-core desktops.

Invision

The MX400 is an adjustable dual gas-spring arm that lets you position two displays independently.

  • Invision specifies 19 to 32 inches, VESA 75 × 75 or 100 × 100 mm and a load capacity of 2 to 9 kg per arm.
  • Pay particular attention to the minimum load and check that the arm’s reach suits your desk.

BONTEC

The MDM002 is a dual mount for smaller monitors, with clamp or through-desk installation.

  • BONTEC specifies 13 to 27 inches, up to 10 kg per arm and VESA 75 × 75 or 100 × 100 mm.
  • The maximum size means it won’t fit displays larger than 27 inches.

Hama

The 00220904 is an adjustable dual monitor mount with clamp or drilled installation.

  • Hama specifies 13 to 35 inches and up to 12 kg per arm. According to the manufacturer, removable VESA plates make installation easier.
  • Check that the mounting method and load capacity suit your desktop and both monitors.

Ergotron

The LX Dual 45-549-026 is a taller dual arm for positioning screens independently.

  • According to Ergotron, the load capacity in a two-monitor configuration is 3,2 to 10 kg per arm. A desk clamp and hardware for grommet mounting are included.
  • Expanding the mount to support three or four screens requires extra kits and changes the load capacity limits.

Joybuy products for two monitors

This selection includes freestanding dual monitor stands and a dual gas-spring arm with clamp or through-desk mounting.

AOKCOS dual monitor stand with storage shelf

AOKCOS monitor stand for 2 monitors, 12–27 inches, with storage shelf

A freestanding option if you’d like to store accessories on or beneath the stand as well as have room for your screens.

VESA 75 × 75 or 100 × 100 mm; up to 10 kg per arm; tilts, swivels and rotates 360°.

View at Joybuy
AOKCOS dual monitor stand, adjustable width from 80 to 108 cm

AOKCOS monitor stand for 2 monitors, 80–108 cm wide

The adjustable width and independently swivelling side panels are useful if you want to position your monitors straight or at an angle.

For 12–27 inches; height 10,4 cm; storage space beneath the stand.

View at Joybuy
Floordirekt dual monitor stand, 80 to 108 cm, black

Floordirekt monitor stand for 2 monitors, MDF, 80–108 cm, black

A freestanding option if adjustable spacing and angled positioning are important for your desk.

The product description mentions independently swivelling side panels and storage space beneath the stand.

View at Joybuy
Floordirekt black dual gas-spring arm for two monitors

Floordirekt dual gas-spring arm, 15–32 inches

An option if you want to adjust the position of both monitors and your desk is suitable for clamp or through-desk mounting.

VESA 75 × 75 or 100 × 100 mm; 2 to 10 kg per monitor; tilts, swivels and rotates 360°.

View at Joybuy
Floordirekt dual monitor stand, 80 to 108 cm, white

Floordirekt monitor stand for 2 monitors, MDF, 80–108 cm, white

The adjustable width and swivelling side panels are worth considering if you want your monitors side by side or angled towards you.

The product description lists a height of 10,4 cm, storage space beneath the stand and a cable clip.

View at Joybuy

Frequently asked questions

Is screen size enough to check compatibility?

No. For both monitors, also check the VESA pattern and weight without the stand, as well as the width if the manufacturer sets a limit. For example, the manufacturer specifies a range of 2 to 9 kg per arm for the Invision MX400.

What should I bear in mind with a lightweight desktop?

Check the desktop construction and installation instructions before attaching the clamp. For the Z2-3D (Gen 3), ARCTIC recommends a reinforcement plate for honeycomb or sandwich desktops with hollow cores, to help prevent damage from clamping. This recommendation applies to that specific model.

How should I position both screens for work?

Position your monitors to suit the tasks you use them for most, and check that both arms can move within the space available. The German Social Accident Insurance reports that performance when using multiple screens can vary depending on the set-up and type of task, so there’s no single arrangement that works for everyone.

What are the rules on cancellations and faulty goods when buying online in Germany?

When you buy online from a business, consumers generally have a 14-day right to cancel. For goods, the cancellation period generally starts when they are received. Your Europe, the European Union’s portal, notes that return postage may apply. Your statutory rights against the seller for faulty goods are separate from a voluntary manufacturer’s warranty, as German consumer advice centres also explain.

Do workplace rules for display screens also apply to my desk at home?

No. The Federal Institute for Occupational Safety and Health’s ASR A6 expressly excludes screen work in private settings from its scope. Ergonomic guidance can still be useful when setting up your desk, but it doesn’t create a legal requirement to buy anything for a desk used privately.