If you regularly compare two document versions side by side, choose a mount based on the screen positions you want, then check the VESA mounting pattern, weight and width of both monitors. Arms that adjust independently give you more flexibility when positioning your screens. For a fixed set-up, a less adjustable mount may be enough, while a freestanding dual stand is an option if your desk can’t accommodate a suitable mount. The model-specific limits for load capacity and desk mounting are key.
Which design is right for you?
Comparing documents side by side
If you need to see the original and revised versions at the same time, choose a set-up that lets you position both screens to suit your needs. The Institute for Occupational Safety and Health of the German Social Accident Insurance studied text comparisons at dual-screen workstations; its findings do not show that one particular mount is better than another.
Changing your screen position frequently
If you switch between comparing versions and other screen positions, check the adjustment options for the specific model. The manufacturers’ specifications for the ARCTIC Z2-3D (Gen 3) and Neomounts DS70-250BL2 both describe adjustable arms.
Unable to use a suitable desk clamp
If a clamp or grommet mount isn’t suitable for your desk, a freestanding dual stand could be an alternative. Whether it will work for you also depends on the space available and the load capacity of the specific model.
What should you look for when buying?
Independently adjustable gas-spring arms
A good fit if: you often want to bring each screen closer for comparison or adjust its height.
Consider: load capacity, VESA mounting pattern and desk mounting vary by model. The Neomounts DS70-250BL2 has a lower maximum load for curved or ultrawide screens than for flat screens.
Less adjustable dual monitor mount
A good fit if: you usually keep both document views in a fixed position and don’t need to move them often.
Consider: the ARCTIC Z2 (Gen 3) has a maximum total monitor load of 15 kg, not 15 kg per screen. Its width specification applies to two equally wide monitors in landscape orientation.
Freestanding dual stand
A good fit if: you can’t use a suitable clamp or grommet mount on your desk.
Consider: the base takes up desk space; the Neomounts DS45-600BL2 is rated for a maximum of 6 kg per screen.
| Priority |
What to check when buying |
Who this matters most to |
| Positioning document views |
Check the monitor width, whether you want landscape or portrait orientation, and the available movement space. |
If I want to read both versions side by side and position them to suit, the layout matters more than extra adjustment features. Around 31% of consumers prioritise the positioning of document views. |
| Compatibility with both monitors |
Compare the weight of each monitor, its VESA mounting pattern and its dimensions with the specifications of the specific model. |
If I want to mount two monitors I already own, both must fall within the relevant weight and VESA limits. Around 31% of consumers put monitor compatibility first. |
| Repositioning screens |
Check that both arms can reach the positions you want and that a wall or partition won’t restrict movement. |
If I regularly switch between comparing documents and other screen positions, independently adjustable arms are important. Around 19% of consumers prioritise being able to reposition their screens. |
| Desk mounting |
Check the desk thickness and construction, the mounting position at the rear edge, and the space available on the desk. |
If my desk can’t accommodate a suitable clamp or grommet mount, I need a compatible freestanding solution. Around 19% of consumers prioritise desk mounting. |
Common buying mistakes
-
Confusing total load capacity with capacity per screen
The ARCTIC Z2 (Gen 3)’s maximum load of 15 kg applies to both monitors combined. For the Z2-3D (Gen 3), ARCTIC specifies 8 kg per arm.
Check the specifications to see whether the load capacity is given per screen or for the whole mount, then compare it with the weight of each monitor.
-
Assuming the screen size alone guarantees compatibility
A suitable screen size alone doesn’t confirm that the VESA mounting pattern or load capacity is compatible. The Neomounts DS70-250BL2 has a lower maximum load for curved or ultrawide screens than for flat screens.
For each monitor, check its screen type, VESA measurement and weight against the specifications for the specific mount model.
-
Assuming a clamp and a stand take up the same amount of space
A clamp requires a suitable desk top and mounting position. A freestanding stand avoids this type of mounting, but takes up desk space.
Before choosing, measure the desk thickness, check its construction and the space at the rear edge, and assess how much room is available on the desk.
Brands and models at a glance
ARCTIC
The Z2 (Gen 3) and Z2-3D (Gen 3) are, respectively, a less adjustable dual mount and a gas-spring version.
- According to ARCTIC, the Z2-3D (Gen 3) supports up to 8 kg per arm, while the Z2 (Gen 3) has a maximum total load of 15 kg.
- These load ratings are not interchangeable. The width specifications apply, under the conditions stated for each model, to two equally wide monitors in landscape orientation.
Neomounts
The DS70-250BL2 is a dual gas-spring arm, while the DS45-600BL2 is a freestanding dual stand.
- According to Neomounts, the DS70-250BL2 supports up to 9 kg per flat screen and up to 8 kg per curved or ultrawide screen.
- The DS45-600BL2 is rated for a maximum of 6 kg per screen; its base takes up desk space.
StarTech.com
The ARMDUAL3 is a clamp-mounted dual arm with rotating monitor mounts.
- According to StarTech.com, it supports up to 8 kg per arm with VESA 75 × 75 or 100 × 100 mm.
- The clamp is specified for desk tops measuring 40 to 85 mm thick. Height adjustment along a pole isn’t the same as the movement offered by a gas-spring arm.
Ergotron
The LX Dual Side-by-Side Arm is designed for two monitors positioned next to each other.
- According to the manufacturer, variant 45-491-216 supports monitors up to 27 inches and weighing 3.2 to 9.1 kg each.
- These specifications apply to this variant. According to the datasheet, larger supported monitors cannot be stacked one above the other.
Fellowes
The Platinum Series Dual Monitor Arm 8042501 is another documented dual-arm model.
- Fellowes’ dimensional drawing specifies 32 inches and a weight range of 1.5 to 8 kg for model 8042501.
- These model specifications don’t amount to an independent assessment of adjustment quality or suitability for a particular desk.
Joybuy products for two monitors
The following Joybuy products include dual stands and arms for two monitors, including models with swivel platforms or gas-spring arms.
No image available
AOKCOS monitor stand for 2 monitors, 12–27 inches
According to the product description, the individually adjustable arms can be positioned to suit different viewing angles.
Specified for monitors from 12 to 27 inches, VESA 75 × 75 mm or 100 × 100 mm, and up to 10 kg per arm.
Tilt ±40°, swivel ±80° and rotation 360°.
View at Joybuy
No image available
AOKCOS monitor stand for 2 monitors, swivel platforms
According to the product description, the side platforms swivel independently and can be set straight or at an angle.
The specified width is 80 to 108 cm; the fixed height is 10.4 cm.
View at Joybuy
No image available
Floordirekt monitor stand for 2 monitors, black, 80–108 cm
According to the product description, the side platforms swivel independently, allowing you to position the screens straight or at an angle.
Material: MDF. Specified width: 80 to 108 cm; fixed height: 10.4 cm.
View at Joybuy
No image available
Floordirekt dual gas-spring arm for 15–32 inches
The adjustable gas-spring arms are described as suitable for two screens, with tilt, swivel and rotation for positioning.
Specified for 15 to 32 inches and 2 to 10 kg per monitor; VESA 75 × 75 mm or 100 × 100 mm.
Tilt ±90°, swivel ±90° and rotation 360°. Mounts using a desk clamp or an existing grommet hole.
View at Joybuy
Frequently asked questions
Is the stated screen size enough to check whether a monitor will fit?
No. Also check the VESA mounting pattern and the weight of each screen against the specifications for the full mount model. Neomounts gives screen sizes in inches as a guide and lists the maximum load and VESA measurement as limits for each product.
What should I bear in mind with a hollow-core desk top?
For the Z2 and Z2-3D (Gen 3), ARCTIC recommends using a reinforcement plate with honeycomb or sandwich desk tops that have hollow cores, to help prevent damage from clamping. This advice applies to the models named and isn’t a general requirement for all monitor mounts.
What are my rights if something breaks, and how does a guarantee differ?
Your statutory rights against the seller are separate from any voluntary guarantee. The consumer advice centre explains that, if the seller puts things right by repairing or replacing the product, they are responsible for the transport, labour and material costs.
Does German workplace law require a particular dual monitor arm?
ASR A6 sets out requirements for screen workstations within its scope, but it doesn’t require you to buy a particular dual monitor arm. The Federal Institute for Occupational Safety and Health applies the rules to screen workstations in workplaces and at teleworking locations; private use outside this scope isn’t automatically covered.