If you usually read two document versions side by side, a crossbar that lets you slide the screens into position is a natural choice. If you often change their spacing or alignment, two independently adjustable arms may be a better fit. A freestanding stand can work if your desk edge isn’t suitable, but it takes up desk space. Before choosing, check the dimensions and weight of both monitors, along with the mounting limits of the specific model.
Which type is right for you?
Reading documents side by side
If you want to compare two versions of a text for extended periods at the same eye level, look for a setup that’s easy to align side by side. In the office tasks it examined, the German Social Accident Insurance’s Institute for Occupational Safety and Health found that results varied depending on the screen configuration and task.
Students with limited desk space
If you need room to write alongside your monitors, compare the space taken up by a desk clamp with that needed for a freestanding base. A clamp will only fit if your desk edge meets the limits specified for that model.
Switching frequently between portrait and landscape
If you rotate one screen to read longer texts, or often reposition each screen separately, independent adjustment options are important. The available adjustments and limits depend on the specific stand model.
What should you look for when buying?
Crossbar with desk clamp
A good fit if: You mainly use your screens side by side and the clamp is compatible with your desk edge. According to the manufacturer, the monitors on the DURABLE PRO 508523 slide along the crossbar; it’s specified for 21–27-inch monitors weighing 3–8 kg each.
Bear in mind: This model is specified for desk tops 14–44 mm thick; these limits don’t automatically apply to other stands.
Two adjustable arms
A good fit if: You often adjust the distance between your screens or change their alignment individually. According to the manufacturer, the Neomounts DS70-250BL2 has gas-spring adjustment and rotation, with either a clamp or grommet mounting option.
Bear in mind: The manufacturer specifies a weight of 1–9 kg per flat screen and a maximum of 8 kg for curved or ultrawide screens. Also check that the VESA mounting pattern is 75 × 75 or 100 × 100 mm.
Freestanding dual monitor stand
A good fit if: A desk clamp or grommet mount isn’t suitable for your desk and you have enough space. HUANUO describes the HNCM1B as a freestanding stand for two monitors.
Bear in mind: According to the manufacturer, the HNCM1B’s base measures 15.4 × 11 inches. Extending the screens too far in front of or behind the centre of gravity can affect stability.
| What you’re looking for |
What to check before buying |
Who it matters most to |
| Aligning screens side by side |
Usable overall width, how far the screens can slide, and independent height and tilt adjustment |
If I’m comparing two versions of a text side by side for a long time, I want to align them easily without constant readjustment. That’s why around 33% of consumers prioritise side-by-side alignment. |
| Keeping the desk clear |
Available desk-clamp space and room to move the screens; for freestanding models, the base dimensions |
If I need to write alongside my screens, every bit of clear space counts. That’s why around 27% of consumers prioritise a small footprint. |
| Making sure the monitors and desk are compatible |
Each monitor’s VESA mounting pattern and weight; for clamps, also check desk-top thickness and edge shape |
Before fitting a stand, I want to be sure both monitors and my desk meet the model’s limits. That’s why around 27% of consumers prioritise a secure fit. |
| Changing position frequently |
Rotation, independent height and depth adjustment, and enough cable slack in the positions you want |
If I switch between portrait orientation and different screen positions, I need the right adjustment options. Around 13% of consumers make frequent repositioning their top priority. |
Avoid common assumptions
-
Checking only the screen size
A stand that supports your screen size may still be incompatible with its VESA mounting pattern or weight.
Check both monitors individually against the specifications for the model you’re considering, with their original stands removed.
If the mounting isn’t compatible, you may need a different stand or a suitable adapter.
-
Assuming freestanding means space-saving
A freestanding model takes up desk space. For the HUANUO HNCM1B, the manufacturer also specifies a limit on how far the monitors can extend from the centre of gravity.
Measure the free space on your desk and plan where both screens will sit.
The base takes up space that could otherwise be used for writing or putting things down.
-
Assuming every desk edge can support a clamp
Clamp limits vary by model. For the DURABLE PRO 508523, the manufacturer specifies a desk-top thickness of 14–44 mm.
Measure the desk top’s thickness and the usable space at the edge, and check underneath before fitting the clamp.
Key brands at a glance
DURABLE
The PRO 508523 has a crossbar and desk clamp, while the SELECT 509523 has two articulated arms and can be mounted with a clamp or through a grommet.
- According to the manufacturer, the monitors on the PRO slide along the crossbar. The clamp on this model is specified for desk tops 14–44 mm thick.
- The SELECT’s mounting options and model limits shouldn’t be assumed to be the same as the PRO’s.
Neomounts
The DS70-250BL2 NEXT Slim is a dual monitor arm with two independently adjustable gas-spring arms.
- The manufacturer specifies clamp or grommet mounting, a 180° rotation limiter and VESA 75 × 75 or 100 × 100 mm.
- The maximum weight differs for flat screens and curved or ultrawide screens.
HUANUO
The HNCM1B is a freestanding alternative if desk mounting isn’t suitable.
- According to the manufacturer, no clamp is needed; the base measures 15.4 × 11 inches.
- The base takes up desk space. When extending the monitors, observe the centre-of-gravity limit specified by the manufacturer.
Ergotron
The LX Dual Side-by-Side Arm 45-245-224 uses two arms to position monitors side by side.
- For this version, the manufacturer specifies two monitors up to 27 inches, weighing 3.2–9.1 kg each; a clamp or grommet mount is included.
- These dimensions and limits apply to version 45-245-224 and not to all LX models.
LogiLink
The BP0098 is a dual monitor stand with a desk clamp and height-adjustable pole.
- The manufacturer’s shop specifies 17–32-inch screens, a maximum of 8 kg per arm and VESA 75 × 75 or 100 × 100 mm.
- Check your desk to make sure the clamp will fit your particular student desk.
Joybuy products for comparing documents
This selection includes freestanding dual monitor stands and a dual arm with either a desk clamp or grommet mounting.
No image available
AOKCOS dual monitor stand, 12–27 inches, with shelf
For two screens with independently adjustable arms, so you can position each view individually.
Features include tilt, swivel, 360° rotation and height adjustment. VESA 75 × 75 and 100 × 100 mm.
View at Joybuy
No image available
AOKCOS tilting dual monitor stand, 12–27 inches
For displaying two versions side by side when you want to adjust each screen separately.
The description lists height adjustment, tilt, swivel and 360° rotation, along with a metal base with non-slip feet. VESA 75 × 75 and 100 × 100 mm.
View at Joybuy
No image available
Floordirekt monitor stand for two screens, 80–108 cm, black
For a side-by-side setup when you want to adjust the width and make use of the space beneath the screens.
The width is specified as 80–108 cm and the height as 10.4 cm. The side sections swivel independently; the description specifies MDF and open space beneath the stand.
The height is fixed at 10.4 cm.
View at Joybuy
No image available
Floordirekt dual monitor arm with gas spring, 15–32 inches
For two versions of a text that you want to position independently or view in portrait orientation.
Specifications include 2–10 kg per monitor, VESA 75 × 75 and 100 × 100 mm, and 360° rotation. It can be mounted with a desk clamp or through a grommet.
View at Joybuy
Frequently asked questions
Is it enough for the screen sizes to be compatible?
No. For both monitors, also check their weight without the original stand and their VESA mounting pattern against the limits of the specific stand model. If you’re using a clamp, make sure it’s compatible with your desk too.
How should I position two screens to compare text?
Start with a comfortable side-by-side setup and adjust both screens to suit your task. The German Social Accident Insurance’s Institute for Occupational Safety and Health found differences across the office tasks it examined, depending on the screen configuration and task. This doesn’t demonstrate that a particular stand will improve productivity in a student’s room.
What should I bear in mind with a freestanding stand?
Leave enough space for the base, and don’t extend the screens so far in front of or behind the centre of gravity that the stand becomes unstable. The manufacturer specifically flags this limit for the HUANUO HNCM1B.
Does ASR A6 apply to every student’s room used privately?
No, not simply because you use a screen at home. The Federal Institute for Occupational Safety and Health uses ASR A6 to clarify requirements under the Workplace Ordinance within its scope, including workplaces and certain forms of teleworking. It isn’t a general purchasing requirement for students using screens privately.