Which setup is right for you?

Photographers aiming for accurate reproduction

If you want to capture the tones and surface of your etching as evenly as possible, time after time, you need to be able to control the position of your lights. The Canadian Conservation Institute discusses different lighting approaches for documenting cultural heritage objects.

Occasional window-light photographers

If you only take the occasional photograph by a window, first check whether the available light is suitable for your subject. Adobe Lightroom Academy points out that window light depends on the conditions at the time.

Photographers capturing details on paper

If you want to document surface texture or damage as well as the overall image, it can be useful to light details separately. The Canadian Conservation Institute describes raking light as a way to highlight texture and surface damage.

What should you look for when buying?

Window light, with no additional light

A good fit if: you can take photographs during the day and the available light lets you capture an even image.

Consider: weather, time of day and the direction your window faces can all affect the light.

An existing light with a separate softbox

A good fit if: you already own a suitable photography light and its mount is compatible with the softbox.

Consider: you may need to buy the light, mount and, where necessary, stand separately. The softbox size needs to suit both the sheet and your available space.

A dimmable continuous light with a softbox

A good fit if: you photograph often or want to compensate for changing window light more deliberately.

Consider: this setup needs extra equipment and space. The light’s specifications don’t automatically apply when a softbox is attached.

Your priority What to check before buying Who is this especially important to?
An even overall image Check whether you can position the light and modifier appropriately beside the artwork. Assess the lighting with a test shot of the whole sheet. If I want to document the etching as a whole as evenly as possible, I look for lighting that can spread across the surface. Around 33% of consumers put even reproduction first.
Changing window light Check the brightness controls on the specific light and, if needed, whether its colour temperature is adjustable. Assess its performance in the complete setup rather than relying on the light’s specifications alone. If the light from the window changes throughout the day, I want to be able to adjust the lighting more precisely for repeat shots. Around 27% of consumers prioritise consistent lighting conditions.
Bringing out the paper’s texture Check whether you can position the light source and stand to the side and at a low angle. If needed, plan separate shots for the overall image and the details. If I want to show the paper’s texture or damage, a dedicated detail shot matters more to me than using one lighting setup for everything. Around 20% of consumers put surface details first.
Adding to equipment you already own Check that your light’s mount matches the softbox’s full fitting, and confirm whether the light, stand, diffusers and grid are actually included. If I want to keep using equipment I already own, I check the fitting and what’s included in advance. Around 20% of consumers prioritise equipment that works with what they already have.

Common pitfalls

  • Confusing an even overall image with a shot that shows texture

    Even lighting can make the paper’s texture less visible. Raking light brings out texture, but can make the overall surface look less evenly lit. The Canadian Conservation Institute explains these different lighting goals.

    Before you buy, decide whether you want to reproduce the whole etching or also document surface details.

    You may also need a compatible light and a suitable stand.

  • Assuming a light’s specifications apply with a softbox attached

    Godox gives a maximum illuminance figure for the SL60IIBi with a standard reflector. This doesn’t automatically tell you what to expect with every softbox, at every distance or with every sheet size.

    Only compare figures measured under the same conditions, and check the lighting in your own setup.

Key brands at a glance

Godox

Godox offers both softboxes and photography lights for a modular setup.

  • Godox lists a Bowens mount, a rectangular size of 60 × 90 cm and a grid for the SB-FW6090.
  • Godox lists adjustable brightness and 2800–6500 K for the SL60IIBi. The specifications for the light and softbox don’t confirm that they’re sold together or that the setup will evenly illuminate an etching.

SmallRig

The RA-R6090 is a rectangular softbox designed for a modular setup with a compatible Bowens-mount light.

  • SmallRig lists a size of 60 × 90 cm, along with two diffusers and a grid.
  • The softbox is a light modifier, not a light source included in the box. Check that its size suits your sheet and the space available for your setup.

NEEWER

The NS93P is a rectangular 60 × 90 cm quick-assembly softbox with a Bowens mount.

  • NEEWER lists two diffusers and a grid for the NS93P.
  • Information about setup and lighting doesn’t replace checking compatibility with your light, or confirm that an etching has been independently measured for even illumination.

walimex pro

The Basic Softbox 60x90 is a rectangular option with a pre-fitted Bowens adapter for a compatible light you already own.

  • The manufacturer lists metal rods and rotation at the speedring.
  • Check the specific listing to see whether a light and stand are included; this isn’t automatically clear from the model description.

BRESSER

The Quick Lock 60x90 is a rectangular quick-assembly softbox.

  • BRESSER describes removable inner and outer diffusers.
  • The manufacturer’s specifications don’t confirm independently measured lighting for an etching or compatibility with every light.

Products to suit your needs on Joybuy

Related products coming soon.

Frequently asked questions

Do I need to buy two softboxes for an etching?

Not necessarily. First, take a test shot to see whether the available window light captures the etching evenly enough. The Canadian Conservation Institute distinguishes between lighting for an overall image and raking light, which brings out surface texture and damage.

How can I show the paper’s texture without compromising the overall image?

If needed, take a separate detail shot using raking light that falls at a shallow angle. The Canadian Conservation Institute describes this approach as a way to bring out surface texture and damage; you’ll need a different lighting setup for an even overall image.

How can I set up the lighting without putting unnecessary strain on the etching?

Position the light and its mount so you don’t need to touch the sheet with the light modifier. If the original is fragile or damaged, first find out whether and how it can be handled safely; the Library of Congress includes a condition assessment when digitising library materials. Follow the instructions for your specific model when cleaning and operating the light.

What additional costs and rights should I consider when buying online?

Check whether you need to buy the light, stand and modifier separately. For online purchases in Germany, the Verbraucherzentrale says you generally have a right to cancel, and its information dated 13 August 2026 states that you usually have 14 days from receiving the goods. It also distinguishes the statutory right to a remedy for faulty goods from a voluntary guarantee (information dated 28 September 2026).

Does a softbox or photography light need a CE marking in Germany?

That depends on the EU rules that apply to the specific product. The European Union explains that a CE marking is required only for products covered by the relevant harmonised rules; the word ‘softbox’ alone doesn’t determine whether a marking is required. For an electric light, check the product-specific markings and documentation.