An A2 photo printer is a good choice if your exhibition posters need to be no larger than A2. For wider designs, a 24-inch printer with roll paper is the more suitable type of device. Canon specifies a print width of 24 inches, or 61 cm, for the TC-21. As well as the printer’s dimensions, compare its paper feed and output, along with the paper, ink and accessories you’ll need. Manufacturer specifications don’t establish a general quality advantage for either type of printer.
Who are these printers suitable for?
A1 posters in a small workspace
If you want to print larger posters but can’t accommodate a freestanding production printer, print width, paper path and usable workspace are key considerations. Canon and HP describe their 24-inch models as suitable for this size range.
A2 photo exhibition in a studio
For photos or artwork up to A2, you can focus more on your choice of paper and image than on maximum print width. Canon lists the PRO-1100 as an A2 printer; Epson describes the SC-P900 as having, among other features, a single-sheet feed for fine art paper.
Small exhibition with changing displays
If you want to update posters yourself as needed, remember to budget for paper and ink, and roll accessories if required. Epson lists the SC-P900’s roll unit as optional; HP specifies a chip requirement for the T230’s ink cartridges.
What should you consider when choosing?
| Consideration |
What to check before buying |
Who it matters most to |
| Finished size and paper path |
Check the finished size, paper type and feed path for the specific model. Canon lists A2 for the PRO-1100, and a print width of 24 inches, or 61 cm, plus roll paper for the TC-21. |
If your design needs to be larger than A2, the paper path must accommodate it too. For around 29% of consumers, getting the right poster size is the top priority. |
| Space needed for printing |
Allow for the desk’s width and depth, as well as clear space for feeding and output. Canon gives the PRO-1100’s dimensions as approximately 723 × 435 × 285 mm and the TC-21’s as 968 × 533 × 245 mm; these are the printer body dimensions, not the full operating dimensions. |
If the printer needs to fit on a small desk, you’ll also need to allow space for paper and operation. Around 29% of consumers give usable workspace the highest priority. |
| Image quality and paper |
First decide on your image and paper finish, then check the specifications for the ink system and compatible media for the model. Canon lists twelve inks for the PRO-1100; Epson describes the SC-P900 as using UltraChrome Pro 10 and having a single-sheet feed for fine art paper. |
For photographs and artwork, choosing the right paper can matter more than having a wider print. Around 24% of consumers prioritise image quality and paper choice. |
| Ink and accessories |
Check what’s included, how much paper you’ll need and which replacement cartridges are compatible with the exact model. Epson lists the SC-P900’s roll unit as optional; HP specifies a chip requirement for the T230’s ink cartridges. |
If you’re keeping a close eye on consumables and essential accessories, check these requirements before choosing a printer. Around 18% of consumers prioritise ongoing costs and accessories. |
Common mistakes when buying
-
Assuming the printer’s dimensions are the same as the space it needs
The published measurements describe the printer body. Large sheets and rolls need extra clearance when feeding and outputting paper.
Measure your desk and allow for the paper path needed for your chosen size before selecting a printer.
An unsuitable workspace could mean you need to find another place for the printer.
-
Choosing an A2 photo printer when you need A1
Canon specifies the PRO-1100 for A2 and gives the TC-21 a print width of 24 inches. These formats meet different needs.
Decide on the finished poster size first, then choose a printer with a suitable paper path.
If your chosen size is beyond the printer’s capabilities, you may need to pay for additional external print jobs.
-
Assuming roll printing or unrestricted cartridge choice
The Epson SC-P900’s roll unit is optional. HP specifies a chip requirement for the T230’s cartridges.
Check what’s included with the specific offer and the cartridge requirements for the exact model.
You may need to buy a separate accessory for the roll printing you have planned.
Key brands at a glance
Canon
The imagePROGRAF models mentioned here cover different needs: A2 photo printing with the PRO-1100 and roll posters up to 24 inches with the TC-21.
- Canon lists twelve inks and dimensions of approximately 723 × 435 × 285 mm for the PRO-1100. For the TC-21, Canon lists roll paper, four pigment colours and dimensions of 968 × 533 × 245 mm.
- These model-specific manufacturer specifications are not an independent comparison of image quality. Also check that the size and paper path suit your design and workspace.
Epson
The SureColor SC-P900 is designed for photo and fine art printing, while the SC-T2100 is described as suitable for posters and technical drawings up to 24 inches.
- Epson describes the SC-P900 as having a single-sheet feed for fine art paper and an optional roll unit. For the SC-T2100, Epson lists posters and drawings up to 24 inches, or 61 cm.
- The SC-P900’s roll unit is not automatically included with the printer. Check what comes with the specific version you’re buying.
HP
The DesignJet T230 is a 24-inch option for A1 printing, with both sheet and roll feeds. It can also handle changing graphic and plan printing needs.
- HP lists an automatic horizontal cutter, along with sheet and roll feeds.
- HP specifies a chip requirement for ink cartridges and notes that firmware updates may block some cartridges. The manufacturer’s description of its compact design doesn’t replace checking whether it will fit your desk and paper path.
Suitable products on Joybuy
Suitable products will be available soon.
Frequently asked questions
Is an A2 printer big enough for my exhibition poster?
Yes, if your finished design is no larger than A2 and the paper is compatible with the printer. For a larger poster, look for a suitable roll paper printer. The 24 inches, or 61 cm, quoted for the Canon TC-21 refers to its print width and doesn’t guarantee every borderless finished size.
What should I measure before putting a printer on a small desk?
Measure the available desk space and allow extra room for paper feed, output and operation. Canon gives the PRO-1100’s dimensions as approximately 723 × 435 × 285 mm and the TC-21’s as 968 × 533 × 245 mm. These measurements don’t fully define how much space the printer needs while printing.
Does the Epson SC-P900 come with a roll paper unit?
Not as standard: Epson lists the roll unit as an optional accessory. Check what’s included with the specific printer version or bundle.
Can I put an old printer in my household rubbish in Germany?
No. The German Environment Agency explains that waste electrical and electronic equipment must be collected separately from unsorted household waste. Check with your local council to find out how to return it.