Who is this relevant to?

Workshop attendees across multiple floors

Check the connection at the actual workspaces and between the Wi-Fi nodes. Microsoft Support notes that a weak internet connection can affect audio and video quality.

Homes with a LAN connection between floors

If you have a network cable connection already in place, or one that can be installed easily, you can connect an additional Wi-Fi node using Ethernet backhaul. TP-Link describes Ethernet backhaul as a connection option for Deco units.

Homes with an existing router

If you want to keep your router, check the access point mode and which features remain available. TP-Link lists some limitations on management features in Deco access point mode.

What should you look for when buying?

First, check the connection at the intended workshop location, then the link between Wi-Fi nodes, and finally how the system will work with your existing router.

What you need What to check before buying Who should pay particular attention?
Reception at the workshop location Plan where to place the units and which sockets to use; test the connection at the intended location. If I’m taking part across several floors, I need Wi-Fi at each workspace. Around 36% of consumers put coverage across floors first.
Connection between nodes Check Ethernet backhaul, available LAN ports and the cabling requirements of the system you choose. TP-Link describes Ethernet backhaul for Deco. If you can use network cables between floors, you can avoid relying on a wireless link between connected nodes. Around 29% of consumers prioritise a reliable connection between nodes.
Keeping your existing router Check that the connection type and operating mode are compatible, and find out which features remain available in access point mode. If I want to keep using my existing router, I need to make sure the mesh system is connected appropriately. Around 21% of consumers put router compatibility first.
Secure, easy-to-maintain operation Check for firmware updates, Wi-Fi encryption and a secure administrator password. The Federal Office for Information Security (BSI) recommends changing the default password and keeping updates up to date. If you’re running a home network long-term, remember to plan for maintaining it and keeping its settings secure. Around 14% of consumers prioritise secure, easy-to-maintain operation.

Common buying mistakes

  • Treating coverage claims or Wi-Fi data rates as a guarantee

    Floors, walls and the specific connection route all affect reception. A claimed coverage area doesn’t tell you how the connection will perform at your own workshop location.

    Test the connection at every workspace you need to use and between any wirelessly connected nodes.

  • Putting a wireless repeater in the furthest location

    An additional node needs a decent connection to the rest of the network itself. If reception is weak where it’s placed, the connection at your workspace may suffer too.

    Check the connection at the planned location, and consider Ethernet backhaul if a suitable network cable connection is available there.

  • Assuming a mesh system, a standalone repeater and a router are the same thing

    A repeater sold on its own isn’t the same as a set containing multiple units. Router mode and access point mode also serve different purposes.

    Before ordering, check what’s included, the connection type and the intended operating mode.

Key brands at a glance

The notes below relate to the product ranges and operating modes mentioned, and aren’t a general assessment of the brands.

TP-Link

The Deco X50 is an expandable Wi-Fi 6 mesh system. TP-Link describes optional Ethernet backhaul for connecting the units.

  • TP-Link lists three Gigabit ports on each Deco X50 unit.
  • According to TP-Link, some Deco app features, including parental controls and port forwarding, aren’t available in access point mode. The manufacturer’s coverage claims don’t replace testing the system in your own home.

FRITZ!

The FRITZ!Mesh Set 4200 brings together three FRITZ!Repeater 3000 AX units for Wi-Fi across multiple locations.

  • FRITZ! says the set can also be used with an existing router from another manufacturer.
  • A single FRITZ!Repeater 3000 AX isn’t the same product as the three-unit set. Before buying, check which mesh configuration will work with your router.

ASUS

The ZenWiFi XD5 is available as a three-pack. ASUS documents router, access point and AiMesh node modes, as well as Ethernet backhaul.

  • The documented operating modes offer several ways to connect and set up the nodes.
  • The XD5 is a dual-band system. Advertised wireless data rates don’t guarantee the connection speed you’ll get at a workshop in your own home.

Joybuy products for Wi-Fi across multiple locations

These mesh systems are designed to provide Wi-Fi across multiple locations. Check which operating mode works with your existing router and whether the nodes will have a suitable connection where you plan to place them.

TP-Link Deco BE22 mesh system, 2-pack

TP-Link Deco BE22, 2-pack

This two-unit set is designed to provide Wi-Fi across multiple locations. Check the connection between the units at the locations where you plan to place them.

Wi-Fi 7, dual-band, Gigabit Ethernet, white.

View at Joybuy
TP-Link Deco M4 AC1200 mesh system, 3-pack

TP-Link Deco M4 AC1200, 3-pack

This three-unit set is designed to provide Wi-Fi across multiple locations. Check whether the unit positions will work for your floors and existing network.

Dual-band, Gigabit ports.

View at Joybuy
TP-Link Deco S4 AC1200 mesh system, 3-pack

TP-Link Deco S4 AC1200, 3-pack

This three-unit set is designed to cover multiple areas with Wi-Fi. Check in advance how it will work with your existing network.

Dual-band, Gigabit ports.

View at Joybuy
MERCUSYS Halo H3000X mesh system, 2-pack

MERCUSYS Halo H3000X, 2-pack

This two-unit set is designed to provide Wi-Fi across multiple locations. Plan where to place the units so you can check the connection between them.

Wi-Fi 6 AX3000, dual-band, three Gigabit ports per unit, WPA3.

View at Joybuy
MERCUSYS Halo H25BE mesh system, 2-pack

MERCUSYS Halo H25BE, 2-pack

This two-unit set may suit Wi-Fi across multiple locations. Check the connection between the units at the locations where you plan to place them.

Wi-Fi 7 BE3600, dual-band, three Gigabit ports per unit, WPA3.

View at Joybuy

Frequently asked questions

Do I need to buy a new router for the workshop?

Not necessarily. First, check the connection at the intended workspace and work out whether the issue is with your local Wi-Fi or your internet connection. If Wi-Fi is weak on another floor, adding a suitably connected Wi-Fi node may be the more targeted solution.

Where should I place a wirelessly connected mesh node?

Don’t simply put it in the furthest location. First, check its connection to the previous node, and move it if the signal is weak. TP-Link’s placement guidance applies to Deco; check the connection using the options provided for your system.

Do I need a high Wi-Fi data rate for a workshop?

No. The bandwidth you need depends on factors including the platform and whether you’re sending video yourself. For webinar attendees watching a presenter with video switched on, Zoom recommends a download speed of around 1.2–1.8 Mbit/s for 720p. This is a platform-specific recommendation, not a minimum requirement for a router’s advertised data rate.

Can I use my own router in Germany instead of the one supplied by my provider?

Yes, as long as the router is suitable for your specific internet connection. Germany’s Federal Network Agency explains that you’re free to choose a suitable router. Whether a particular mesh system connects directly to your internet connection or is used behind an existing modem or router is a separate technical question.

What maintenance should I plan for my home network?

Keep the firmware up to date, and protect the administration settings and Wi-Fi with appropriate security measures. The Federal Office for Information Security recommends, among other things, changing the router administration’s default password and keeping updates up to date.