Who uses an external SSD for CAD projects

Back up project versions

If you want to return to a usable version of a CAD project after accidentally deleting files or a drive failure, plan to keep a separate copy and check that you can restore files from it. Germany’s Federal Office for Information Security recommends regular backups and testing that you can restore them.

Switch between computers

If you work at home and on another computer, check the ports, file system and that all CAD references are transferred. Apple Support points out that formatting deletes files; Autodesk describes a feature in Inventor that lets you gather a file together with its references.

Keep several project versions

If you want to archive designs, assemblies or different versions, choose a capacity that suits your entire project library, not just one CAD file. Samsung’s product information and Autodesk’s Inventor documentation show that both the specific drive variant and its associated project files matter.

What to look for when buying

First work out how much space your complete project library needs. Then check that the drive will work with all the computers you plan to use, and only then decide whether a higher transfer rate matters for your copying routine.

What matters What to check before buying Who it matters to
Recoverable project versions Choose a separate location for your backup and test whether you can open a restored version. If I need to carry on working after a fault or accidental deletion, I need a separate, tested copy. Around 31% of consumers put recoverability first.
Using the drive with several computers Check the ports, cable, file system and rules for removable media on the school computer; test the complete project on the destination device. If I want to use the same project at home and on another computer, its referenced files need to come with it too. Around 31% of consumers prioritise switching between computers.
Space for projects and versions Check the size of all your project folders and the versions you need, then compare it with the capacity of the specific drive variant. If I want to keep several designs or assemblies, I need enough space for my entire library. Around 23% of consumers put archive space first.
Transfer speed Compare the data rates supported by the SSD, computer port and cable; manufacturers’ maximum figures only apply under the right conditions. If I often copy large project folders, transfer speed matters more to me than it would for occasional small transfers. Around 15% of consumers prioritise copying speed.

Avoiding mistakes when saving and transferring files

  • Moving your only copy of a project to the external SSD

    A single drive won’t protect you if the drive is lost or fails. Germany’s Federal Office for Information Security points out that the lifespan of a storage device cannot be predicted precisely.

    Keep a separate backup and test that you can open a restored version.

  • Copying only the main file from a CAD assembly

    An assembly may refer to other files. If they’re missing on the destination computer, you may not be able to open the project in full.

    For Autodesk Inventor, use “Pack and Go” if appropriate. For other CAD software, check for the equivalent project feature and open the transferred copy on the destination computer.

  • Assuming USB-C guarantees top speeds

    The shape of the connector alone doesn’t tell you what data rate the computer and cable support. Verbatim’s stated maximum speeds for its USB4 model require a USB4 port and a USB4 cable.

    Compare the interfaces on both computers and the cable you’ll use with the requirements of the specific SSD.

  • Reformatting the SSD before making a copy

    Formatting deletes the files already on the drive. Apple Support explicitly warns about this risk.

    Back up any files you need elsewhere before changing the file system.

Relevant brands at a glance

Samsung

The Portable SSD T7 is listed in a grey 1 TB variant.

  • Samsung lists USB 3.2 Gen 2 and sequential read speeds of up to 1.050 MB/s for this T7.
  • This is a maximum figure, not a measurement using CAD projects, and performance depends on the computer and connection. Password protection needs to be set up before use.

Kingston

The Dual Portable SSD is designed for switching between devices with USB-A and USB-C ports.

  • Kingston lists 512 GB, 1 TB and 2 TB variants, with read speeds of up to 1.050 MB/s and write speeds of up to 950 MB/s.
  • The built-in connectors don’t guarantee that a particular school computer allows removable media or will reach a particular speed. Also check that you have a separate backup.

Crucial

The X10 Pro range is an option if you regularly transfer larger project libraries and can check the host interface in advance.

  • Crucial lists read speeds of up to 2.100 MB/s and write speeds of up to 2.000 MB/s for the range, as well as an IP55 rating.
  • According to Crucial, these are maximum sequential speeds measured by the manufacturer. Formatting, host features and connection conditions can affect performance.

Verbatim

The TurboMetal SSD USB4, model 32021 with 1 TB, is designed for frequent large transfers when used with a compatible computer and cable.

  • Verbatim lists read speeds of up to 3.700 MB/s and write speeds of up to 3.600 MB/s, as well as a built-in fan.
  • Verbatim requires a USB4 port and USB4 cable to achieve the stated optimum speeds. These are manufacturer figures, not measurements with CAD projects.

Joybuy products for CAD projects

This selection includes external SSDs for storing CAD project folders and switching between computers. Compare the capacity of each drive with your complete project library, and check the ports on the devices you use.

Kexin M.2 SATA external SSD, 256 GB

Kexin M.2 SATA external SSD, 256 GB

A suitable storage option if your complete project library, including the versions you need, fits within the stated capacity.

256 GB; USB 3.1 Type-C; up to 500 MB/s according to the product description.

Compare the capacity with the actual size of your project folders.

View at Joybuy
Kexin external SSD, 512 GB

Kexin external SSD, 512 GB

An option if 512 GB is enough for your complete project folders and the versions you need.

512 GB; USB 3.1 Type-C; up to 500 MB/s according to the product description.

The product description lists compatibility with PCs, Macs and Android devices; also check the requirements of the school computer you’ll be using.

View at Joybuy
Samsung Portable SSD T7, 1 TB, Grey

Samsung Portable SSD T7, 1 TB, Grey

Could be a good fit if your complete project library, including the versions you need, fits within 1 TB.

1 TB; USB 3.2 Gen 2; up to 1.050 MB/s read and 1.000 MB/s write according to the product description.

The description lists cables for USB-C and USB-A ports, as well as compatibility with PC and Mac. Check the requirements of the destination computer.

View at Joybuy
Samsung external SSD T7, 2 TB, Indigo Blue

Samsung external SSD T7, 2 TB, Indigo Blue

The 2 TB variant is an option if your project archive, including all the versions you need, fits within this capacity.

2 TB; USB 3.2 Gen 2; up to 1.050 MB/s read and 1.000 MB/s write according to the product description.

The description lists cables for USB-C and USB-A ports, as well as compatibility with Windows and macOS.

View at Joybuy
KIOXIA Exceria Plus G2 Portable SSD, 2 TB

KIOXIA Exceria Plus G2 Portable SSD, 2 TB

Could suit a larger project archive if your complete library fits within the stated capacity.

2 TB; USB 3.2 Gen 2; up to 1.050 MB/s read and 1.000 MB/s write according to the product description.

The description lists cables for USB-C and USB-A ports, as well as compatibility with Windows and macOS. Check that it will work with the specific school computer.

View at Joybuy

Frequently asked questions

Is it enough to save the CAD project only on the new SSD?

No, not if you need to carry on working after a loss or drive failure. Keep a separate backup and check that you can open the files from it. Germany’s Federal Office for Information Security recommends regular backups and testing that you can restore them.

How can I transfer a CAD assembly without losing its referenced parts?

Check the features available in your CAD software. For Autodesk Inventor, Autodesk describes “Pack and Go”, which gathers a file and its referenced files together; this doesn’t automatically apply to other CAD programmes.

Can I use the same SSD with a Mac and a Windows computer?

It can work if the file system, ports and requirements of both computers are compatible. Apple Support lists exFAT as a formatting option for drives over 32 GB and warns that formatting deletes existing files. Back up your files first, then test the CAD project on the destination computer.

Is plugging in an external SSD enough for Fusion projects?

Not necessarily. Autodesk describes offline use in Fusion for designs that have previously been cached locally. Check how export and offline availability work in the version of Fusion you use; an SSD alone won’t automatically make a cloud project library available locally.