Which approach is right for you?

Camera RAW editors

You want to create different colour or tonal versions of your landscape negatives from your digital camera’s original files, and can set up a macro digitising rig.

120 landscape photographers

Your negatives are larger than 35mm. Capturing the full film format and keeping the original as flat as possible are key factors in your choice.

35mm archive creators

You work with lots of 35mm strips and are weighing up camera capture against automatic film transport and scanner-based files.

What should you look for when choosing?

Criterion What to look for when buying Who it matters most to
Camera RAW Check that the camera really does save RAW files in the capture mode you’ve chosen. In-camera negative conversion may instead produce a JPEG. If I want to edit my camera’s original RAW file, I choose a camera-based capture method and check that RAW mode is enabled. Around 36% of consumers put camera RAW first.
120 format Identify the negative format and check that the holder and device can accommodate the required image size. If I want to capture the full frame of 120 landscape negatives, I look for a compatible holder or scanner. Around 29% of consumers prioritise the 120 format.
Detail and dust Compare the scanning and correction modes available for your film type. Manufacturer-stated dpi figures are not independent proof of actual image sharpness. If I want to work on 35mm negatives in detail and factor in the time needed for dust retouching, I check the film type and software features. Around 21% of consumers have this priority.
Strip throughput Check that your negatives are in suitable strips and find out how long a strip the specific device can transport. If I want to work through lots of compatible 35mm strips in one go, I compare automatic transport with positioning each camera shot individually. Around 14% of consumers prioritise strip throughput.

Common misconceptions

  • “RAW” always means camera RAW

    Scanner DNG and SilverFast HDRi RAW are scanner-based files, not captures made using your digital camera’s sensor.

    Before buying, decide whether you need native camera RAW files or editable scanner files.

    If you find you need native camera RAW files after buying a scanner, you may also need to set up a camera digitising rig.

  • Assuming a 35mm holder will work with 120 negatives

    The VALOI easy35 v1 and the dedicated film scanners described here are designed for 35mm film. You’ll need a suitable setup for 120 film.

    Identify your film format first, then check what’s included with the specific version you’re considering.

    For a different film format, you may need an additional compatible holder or another capture method.

  • Assuming manufacturer-stated dpi or interpolated megapixels equal measured sharpness

    These figures describe scanning or output modes. For the reflecta x66-Scan, the manufacturer distinguishes between a 14 MP sensor and an interpolated 22 MP output.

    As well as the figures, compare the film format, file type and intended workflow.

  • Assuming previously listed models are still available from the manufacturer

    Epson marks the Perfection V600 Photo and V850 Pro as discontinued on its German product pages.

    Use their format specifications as a comparison, and check a specific offer, including its film holders, before deciding to buy.

    Looking for another offer takes extra time, as you’ll need to check the condition, accessories and seller.

Key brands at a glance

VALOI

Camera digitising accessories for 35mm and smaller formats, plus a separate holder for 120 film.

  • VALOI lists built-in lighting for the easy35 v1, while the 360 holder supports the 120 format.
  • The easy35 v1 is not a 120 system. You’ll need a camera and a suitable macro lens to capture the image; the separate 120 holder also requires a light source.

Nikon

The ES-2 is a negative digitising adapter for specific Nikon camera and lens combinations.

  • Nikon lists specific compatible lenses. Compatible cameras can use the adapter as part of a camera-based capture setup.
  • According to Nikon, in-camera negative conversion saves JPEG files on the D850 and D780. With other listed cameras, you may need to invert the image manually afterwards.

reflecta

The RPS 10S and x66-Scan offer different scanning methods and cover different film formats.

  • For the RPS 10S, reflecta lists DNG output and automatic transport for 35mm strips. The x66-Scan supports specific 35mm and 120 formats.
  • According to reflecta, the x66-Scan saves JPEG files to an SD card. Its 22 MP output is interpolated, not a native camera RAW file.

Plustek

The OpticFilm 8300i SE is a PC-connected film scanner for 35mm negatives and slides.

  • Plustek lists 7,200 dpi, an integrated infrared channel and SilverFast SE Plus 9 in the box.
  • The model is limited to 35mm film. Its product specifications do not confirm any particular camera RAW or scanner RAW export.

Epson

The Perfection V600 Photo and V850 Pro are examples of flatbed scanners with holders for 35mm and 120 film.

  • Epson lists TIFF as an output format and film holders for 35mm and 120 film.
  • Epson marks both specific models as discontinued on its German product pages. TIFF is not a native camera RAW file.

Suitable products on Joybuy

Related products will be available soon.

Frequently asked questions

Is a scanner DNG the same as my camera’s RAW file?

No. reflecta describes the RPS 10S DNG as a scanner raw data output; a native camera RAW file comes from a capture made with your digital camera. SilverFast also describes HDRi RAW as a raw data format for analogue originals, not as a camera sensor file.

What do I need to set up before my first camera scan?

Check the film format, keep the film as flat as possible, position your camera and suitable macro lens, and light the negative evenly. Take the photo with RAW mode actually enabled; you’ll then need to convert the negative to create a positive image.

Does an infrared channel mean I don’t need to clean my negatives?

No. With suitable film, an infrared channel can detect dust and scratches. According to SilverFast, infrared-based correction cannot be used with traditional silver-based black-and-white film. Clean originals and, where necessary, manual retouching are still important.

What extra costs and rights should I consider when buying in Germany?

A camera holder may also require a camera, macro lens, light source and conversion software. For a PC scanner, check what software is included and the computer requirements. For a typical online purchase from a trader in the EU, Your Europe generally describes a 14-day right to cancel from delivery and a minimum two-year legal guarantee. Exceptions and the status of the specific seller should be taken into account; the legal guarantee is not the same as a manufacturer’s voluntary warranty.