Who is this relevant to?

Archives with lots of negative strips

If you want to digitise a large number of analogue 35 mm photos, it’s important to consider how often you’ll need to feed the strips through by hand. reflecta describes the RPS 10S as automatically feeding compatible strips; Plustek lists a holder for multiple images with the OpticFilm 135i.

Project folders with existing scans

If your image files are already available, you can create contact sheets using image management software rather than buying a scanner just for that task. XnView MP describes contact sheets with captions and a choice of output formats.

Archives containing both slides and negatives

If you have different types of originals, check the film formats and compatible holders against your collection before you buy. Plustek describes the OpticFilm 135i as suitable for 35 mm originals; Kodak Photo Plus EU lists adapters for 135, 110 and 126 film for the Slide N Scan.

What should you look for when buying?

First, check whether you already have usable image files. If you still need to scan your negatives, make sure the supported film formats and feed mechanism suit your collection. You can then create contact sheets using suitable software.

What to consider What to check before buying Who should pay particular attention?
Throughput Check whether the scanner feeds whole compatible film strips or captures several images in one holder. Manufacturers’ figures for the number of frames are not an independent comparison of scanning times. If I need to scan lots of continuous 35 mm strips, I want to minimise the amount of manual feeding. Around 31% of consumers cite throughput as their top buying priority.
Film formats List your strips and mounted slides, then check that the supported formats and supplied holders match your collection. With a mixed archive, I mainly want to be sure that the holders and film formats are compatible. Around 25% of consumers prioritise this.
Folders and contact sheets Test image selection, file names, captions and output format using a representative project folder. Also check that the software and licence suit your needs. If I already have files, or need to organise scans into project folders, I want a clear way to create labelled contact sheets. Around 25% of consumers put their folder and contact sheet workflow first.
Image detail Distinguish sensor or optical specifications from interpolated output figures. Consider whether you need images for browsing or individual files for further editing. If I want to edit selected negatives later, I check image detail specifications separately from interpolated output figures. Around 19% of consumers prioritise image detail for selected photos.

Common buying mistakes

  • Buying a scanner when all you need is a contact sheet

    If your images are already saved as files, a contact sheet feature in image management software could take care of the missing step.

    First, try it with a representative project folder and create a test contact sheet before choosing additional scanner hardware.

    An unnecessary scan can mean extra work transferring and sorting files.

  • Confusing a multi-image holder with automatic film feeding

    A holder for several images doesn’t necessarily feed an entire film strip automatically. Plustek says the OpticFilm 135i can handle up to six frames from a film strip in one holder workflow; reflecta describes the RPS 10S as automatically feeding compatible frames.

    Make sure the feed mechanism suits your film: uncut or continuous strips require a different workflow from individual holders.

    With a large collection, repeatedly loading film, changing holders and sorting images remain additional tasks.

  • Mistaking interpolated output for extra optical detail

    For the x44-Scan, reflecta distinguishes the sensor specification from the interpolated output pixels. Rollei also labels the higher dpi figure for the PDF-S 240 SE as interpolated.

    Compare sensor or optical specifications separately from upscaled output figures.

  • Planning for the scanner but not the whole workflow

    With an SD card workflow, you’ll still need to transfer the files to the right project folders and arrange them into contact sheets. The supplier says that an SD card is required but not included with the KODAK Slide N Scan; XnView MP states that a paid licence is required for commercial business use.

    Check what’s included and the licence terms for the way you plan to scan and use your images.

    Depending on your workflow, you may also need a memory card or a suitable commercial software licence.

Key brands and model ranges at a glance

reflecta

The models described here offer different workflows: automatic feeding of compatible strips or standalone JPEG capture to an SD card.

  • reflecta says the RPS 10S automatically feeds between 3 and 40 frames. This is a manufacturer’s claim, not an independent throughput test.
  • According to reflecta, the x44-Scan saves JPEG files to an SD card.
  • Capturing images to an SD card doesn’t take care of transferring them to project folders or creating contact sheets afterwards.

Plustek

The OpticFilm 135i uses a holder-based batch workflow for 35 mm images. The OpticFilm 8300i SE is described as a more targeted 35 mm scanner, with an infrared channel and SilverFast SE Plus 9.

  • Plustek says the OpticFilm 135i can handle up to six frames from a film strip or four slides in one holder workflow.
  • Plustek lists a hardware resolution of 7,200 dpi and an integrated infrared channel for the OpticFilm 8300i SE.
  • The 135i’s holder-based workflow is not evidence that it feeds a whole roll of film. Its specification page gives conflicting figures for photos and A4; these figures are not used as a basis for comparison here.
  • For the OpticFilm 8300i SE, Plustek lists a scan time of around 20 seconds at 3,600 dpi, or around 40 seconds with infrared scanning.

KODAK

According to Kodak Photo Plus EU, the Slide N Scan is a PC-free option for the film formats listed there.

  • Kodak Photo Plus EU lists adapters for 135, 110 and 126 film, plus storage on an SD card.
  • The supplier says that an SD card is required for use but isn’t included. There’s no evidence that it can create contact sheets for large project folders.

Rollei

According to the German product page, the PDF-S 240 SE is a standalone multi-scanner for certain slides, 24 × 36 mm negatives and paper photos.

  • The ability to scan different types of original can be useful for mixed collections.
  • Rollei explicitly labels 2,400 dpi as interpolated. The product page doesn’t confirm an automatic film feed for large collections.

Epson

The Perfection V600 Photo is an example of a flatbed scanner with film holders for several 35 mm images and medium-format originals.

  • Epson Germany lists two holders for 35 mm film strips, each with six frames, and a holder for four mounted 35 mm slides.
  • Epson Germany marks the V600 Photo as discontinued. The holder specifications are therefore useful for comparing scanners, not as an indication that new stock is currently available.

Matching products at Joybuy

Related products coming soon.

Frequently asked questions

Can I create contact sheets from existing image files without buying a scanner?

Yes. XnView MP describes a contact sheet feature for selected images, with a customisable layout, captions and output options including PDF. Try the workflow with a representative project folder.

Do multi-image holders automatically scan a whole roll of negatives?

No. A multi-image holder doesn’t mean the scanner automatically feeds a whole roll. Plustek says the OpticFilm 135i can handle up to six frames from a strip or four slides in one holder workflow; by contrast, reflecta specifically describes the RPS 10S as automatically feeding compatible frames.

Do I need any extra accessories for an SD card scanner?

It depends on the model. Kodak Photo Plus EU says that an SD card is required for the KODAK Slide N Scan but isn’t included; SD and SDHC cards up to 32 GB are listed. Check that the memory card and holders are compatible with the specific model you’re considering.

Which licence do I need to use XnView MP for business?

According to XnView MP’s licence FAQ, a paid licence is required for commercial use in a business. The supplier says that use for private, educational, public and non-profit purposes is free; check the licence terms that apply to your intended use.

Can I publish any contact sheet I’ve scanned in Germany?

No. Permission to make a private copy doesn’t give you blanket permission to publish it. Under the conditions set out in § 53 UrhG, individual copies may be made for private use, but not for commercial purposes in this case; the distribution and public communication of such copies are generally prohibited. Check the rights to the specific images and your intended use separately.