Which workflow is right for you?

Photographers providing editable files to clients

If you want to crop or adjust the colour of landscape scans later, decide which source file to keep and which finished version to hand over. In the context of archiving, the Federal Agencies Digital Guidelines Initiative distinguishes between master files and derivative access images.

Photographers working with 120 film or panoramic negatives

Start by checking the image dimensions and holder: a scanner for standard 35 mm frames won’t necessarily handle wide panoramas or 120 roll film. Format specifications vary between manufacturers.

Photographers with lots of film strips to scan

If you’re digitising a large number of strips, the feeder or holder capacity can affect how often you need to reload. Remember to allow extra time for checking images, naming files and preparing the handover.

What should you look for when choosing?

Start by deciding on the format and the files you need. Then compare the workflow for the amount of film you have and the post-processing required.

Buying criterion What to check before buying Who should consider this?
Editable files for handover Agree the file format, editing stage, naming conventions and scope of the handover; check the output from the specific scanner and software combination. If you want to keep the source file separate from the finished client version, you’ll need a workflow that supports this. Around 36% of consumers put editable handover files first.
Film format and image area Identify the film type and image length; compare the maximum scanning area with the holders supplied and those available as optional extras. If your landscape negatives are on 120 film or are panoramas, the holder must accommodate the specific image size. Around 29% of consumers prioritise the right film format.
Throughput for large numbers of strips Check how many frames fit in a holder, the length of strip the scanner can feed, and how long it takes to check a finished project folder. Frequently loading suitable negative strips can slow down the workflow when you have a lot to scan. Around 21% of consumers focus primarily on strip throughput.
Dust correction Consider the type and condition of the film; check which manual or software-based correction options are available. If dust or scratches could spoil your landscape images, look for correction tools suited to the material you’re working with. Around 14% of consumers prioritise correcting defects later.

Which assumptions should you avoid?

  • Don’t confuse interpolated output with extra captured detail

    For the x33-Scan, reflecta distinguishes between the sensor and higher-resolution interpolated output. A higher pixel count produced through interpolation doesn’t automatically mean that extra image detail has been captured.

    Compare sensor or optical specifications separately from interpolated pixel counts, and check which scan mode is intended for your handover.

  • Don’t assume a stand-alone JPEG is the same as an agreed editable source file

    The documented workflow for the reflecta x33-Scan saves JPEG files directly to an SD card. This isn’t automatically the same as keeping a separate source file for future versions.

    Before scanning, agree which files your client will receive and which source version you want to keep.

  • Don’t assume a film format specification means a panoramic holder is included

    Plustek lists the panoramic holder for the OpticFilm 135i as an optional extra. The stated limits for 120 formats also vary between models.

    Compare the dimensions of your negatives with the scanning area, and check whether the holder you need is included in the specific offer.

    A panoramic holder may need to be purchased separately.

  • Don’t confuse automatic film feeding with a finished client handover

    Feeder capacity and scan time per frame don’t automatically include image checks, corrections and file organisation. The independent F.A.Z. Kaufkompass notes that, for the Plustek OpticFilm 135i, scanning up to six frames per pass can be a limitation when handling larger quantities.

    Plan your workflow around a representative batch of negatives, allowing time for checking, editing and filing as well.

    Allow extra time for image checks, corrections and file organisation.

Which brands and model ranges are relevant?

Plustek

The models listed cover 35 mm film and, with the OpticFilm 120 Pro, certain 120 formats.

  • For the OpticFilm 135i, Plustek lists batch scanning of up to six frames on a 35 mm strip. According to the manufacturer, an optional holder is required for panoramas.
  • For the OpticFilm 120 Pro, Plustek lists holders for 120 formats up to 6 × 12 cm.
  • The independent F.A.Z. Kaufkompass considers the number of frames per pass a limitation for larger quantities with the 135i. These specifications apply to the individual models, not the brand as a whole.

reflecta

The range spans the computer-connected RPS 10S and stand-alone models such as the x33-Scan and x66-Scan.

  • For the RPS 10S, reflecta lists automatic feeding of suitable strips containing 3 to 40 frames, with DNG output.
  • For the x33-Scan and x66-Scan, the manufacturer lists direct saving of JPEG files to an SD card.
  • According to reflecta, the x66-Scan supports 120 formats from 6 × 4.5 cm to 6 × 9 cm. The model name alone doesn’t tell you the file format or which holders are included.

Epson

The Perfection V850 Pro and V600 Photo illustrate the flatbed scanner design, with a transparency unit and film holders.

  • Epson lists holders for 35 mm and 120/220 film, as well as TIFF output, for both models.
  • Epson Germany lists both models as no longer available. Their technical specifications describe the design, but don’t confirm that new units are currently on sale.

Kodak Photo Plus

The Slide N Scan is designed to digitise supported small film formats directly, using a display and SD card.

  • The EU product page lists adapters for 135, 110 and 126 film, as well as a 14 MP sensor.
  • According to the retailer, an SD card isn’t included. The listed film formats don’t include 120 roll film, and the manufacturer’s description doesn’t independently confirm that it’s suitable for demanding client master files.

Related products at Joybuy

Related products will be available soon.

Frequently asked questions about film scanners

Is a 35 mm scanner suitable for panoramas and 120 landscape negatives?

Not necessarily. For 35 mm panoramas, Plustek lists an optional holder for the OpticFilm 135i; for the OpticFilm 120 Pro, it lists dedicated 120 holders up to 6 × 12 cm. Check the film type, image length and included accessories separately.

How should I prepare files for a client handover?

Agree the file format and editing stage before scanning. If you may need to create alternative versions later, keep the source file and finished version clearly distinguishable. The Federal Agencies Digital Guidelines Initiative treats master files and derivative access images separately. This is workflow guidance, not a general legal requirement to use a particular file format.

Does an infrared channel remove dust from every negative?

No, this type of correction isn’t automatically suitable for every film. LaserSoft Imaging describes infrared-based defect detection for suitable originals and identifies black-and-white film as a case for software-based correction. Check the film material, scan a test image and see which software features are available.

What else should I check before buying?

Check whether the offer includes the holders, an SD card and the right software. The European Union’s consumer information states that purchases from traders generally come with a minimum two-year legal guarantee of conformity from the date you receive the goods, and distinguishes this from a voluntary guarantee. This consumer information cannot be applied to a business purchase without checking the relevant rules.

Do I need consent from people pictured before handing over landscape images?

If identifiable people appear in the images and you intend to distribute or publicly display them, check the rules that apply to the specific use. Section 22 of the German Art Copyright Act concerns images that are distributed or publicly displayed; a private handover to a client isn’t automatically the same as publication.