What matters to different users

Archivists with file requirements

If you’re handing files over to a customer, check in advance whether JPEG is enough or whether you need an editable archival file. reflecta lists JPEG as the output format for the x44-Scan and DNG for the RPS 10S. In its 2016 guidelines, the German Research Foundation lists TIFF as a possible master format for institutional digitisation.

Owners of mixed-format negatives

If your collection includes several film formats, check the scanner’s actual scanning area and the holders available. Plustek specifies the OpticFilm 8300i SE for 35 mm film, while reflecta lists 120 formats from 6 × 4,5 to 6 × 9 cm for the x66-Scan.

Archivists with large 35 mm collections

If you need to scan lots of strips before handing them over, distinguish between scanning one frame at a time and genuine strip transport. reflecta describes the RPS 10S as offering automatic transport for 35 mm film strips containing 3 to 40 frames.

What to consider when choosing a scanner

Priority What to check before buying Who it matters most to
Files for handover Check the agreed file format, colour depth and export options in the workflow for the specific device and software. If I’m preparing files for a customer, I want to know whether they can be edited later. Around 33% of consumers put file format first.
Film format Identify the film type and frame size, then check the supported formats and the holders you’ll need. If my collection contains negatives in different formats, I want to avoid finding that some of them won’t fit in the scanner. Around 27% of consumers say format compatibility is their top priority.
Throughput Check the capacity per pass, and assess manual or automatic feed separately. If I need to scan lots of 35 mm frames before a handover deadline, the whole workflow, including checking the results, matters to me. Around 20% of consumers prioritise throughput.
Organised handover Open and organise the files, make a separate backup and plan the agreed handover method. If I’m handing organised scans over to a customer, I want to plan how they’ll be labelled and make an additional backup. Around 20% of consumers focus on this priority.

Common digitisation mistakes

  • Mistaking interpolated pixel counts for extra image detail

    reflecta lists a 16-megapixel sensor and 6.000 × 4.000 interpolated pixels for the x44-Scan. Rollei distinguishes between the DF-S 1300 SE’s effective resolution of 13 megapixels and its output, which is upscaled to 25 megapixels.

    Compare the sensor or optical resolution and assess a test scan rather than relying on the largest output file.

    If the output doesn’t meet the requirements of the job, you may need to do extra editing or scan again.

  • Mistaking JPEG files on a memory card for a finished archive

    Files saved directly still need to be checked, matched to the negatives and backed up for handover. In its 2023 edition, the Federal Office for Information Security describes redundant backups as a way to reduce the impact of data loss.

    Record the film and frame sequence, open the files to check them and create a separate backup before completing the handover.

    Organising, checking and making an additional backup all take time and storage space.

  • Assuming a 35 mm scanner will handle every negative format

    Plustek specifies the OpticFilm 8300i SE for 35 mm film, while reflecta specifically lists 120 formats for the x66-Scan.

    Before buying, identify a few of your negatives and check their formats against the scanning area and holders for the specific device.

    You may need another device or a different digitisation method for formats the scanner doesn’t support.

  • Expecting infrared correction to work on silver-based black-and-white negatives

    SilverFast and LaserSoft Imaging explain that infrared light cannot pass through the emulsion of traditional silver-based black-and-white film as it does with other film types.

    Test black-and-white film separately and don’t make infrared correction your only reason for buying.

    Depending on the film, you may need to do additional retouching by hand or with software.

Key brands to consider

Plustek

Computer-connected 35 mm film scanners for negatives and slides.

  • For the OpticFilm 8300i SE, Plustek lists a hardware resolution of 7.200 dpi and SilverFast SE Plus 9.
  • This model is specified for 35 mm film. Infrared correction isn’t a reliable advantage for traditional silver-based black-and-white negatives.

reflecta

Models for different workflows: stand-alone scanning, 120 formats and computer-connected 35 mm film transport.

  • According to the manufacturer, the x44-Scan saves JPEG files without a computer, while the x66-Scan supports 120 formats from 6 × 4,5 to 6 × 9 cm.
  • These features apply to the specific models, not the range as a whole. The RPS 10S needs a computer and is limited to the stated 35 mm film range.

KODAK Photo Plus

Stand-alone digitiser for the 135, 110 and 126 film formats listed on the product page.

  • Compatible adapters are listed for the Slide N Scan.
  • The supplier distinguishes between a 14-megapixel sensor and an interpolated 22-megapixel output. Check the specific version and what’s included.

Rollei

The DF-S 1300 SE is described as a scanner with a display and memory card slot for computer-free use.

  • Rollei lists an effective resolution of 13 megapixels.
  • This is different from the output, which is upscaled to 25 megapixels.

Epson

Flatbed scanners are one option for mixed originals, provided the film holders and specific model suit the job.

  • A flatbed scanner may also be suitable for other types of original, as well as negatives.
  • Epson Germany lists the Perfection V600 Photo and V850 Pro models as discontinued. Older recommendations therefore don’t confirm that they’re currently available.

Products on Joybuy

Related products coming soon.

Frequently asked questions

Are JPEG files enough for handing over work to a customer?

JPEG may be suitable if you’ve agreed on viewing and basic use. If the file needs to be edited later, agree on the required master format in advance and check a test export. In its 2016 guidelines, the German Research Foundation lists TIFF as a possible master format for institutional digitisation; this isn’t a blanket requirement for private customer jobs.

Can infrared automatically remove dust from every old black-and-white negative?

No. Infrared light cannot pass through the emulsion of traditional silver-based black-and-white film as it does with other film types. SilverFast and LaserSoft Imaging describe this limitation of the infrared process. Check the film type and, if needed, try software-based or manual correction.

What should I prepare before starting a large scanning session?

Sort the negatives by film and frame sequence, then test a few scans using the agreed settings. The German Federal Archives describes how its photographic restoration team agrees on image type, resolution, size, reference number and file type before scanning. This institutional practice isn’t a binding requirement for a private job.

Who should I contact if my scanner is faulty?

For consumer purchases, statutory rights relating to faulty goods are generally against the seller. The European Union’s consumer information states that the minimum period is two years from receipt of the goods. An additional manufacturer’s warranty doesn’t replace these rights. Also check that the software and drivers work with your operating system.

What should I consider when handling a customer’s family photos?

The obligations that apply depend, among other things, on whether people can be identified, how the images are processed and the roles of those involved. Germany’s data protection supervisory authorities explain processing on behalf of a controller under Article 28 of the GDPR. For the specific job, agree on responsibilities, access and how the files will be handed over.