First decide whether you need a computer connected during scanning. A standalone scanner saves images to an SD card, while a USB film scanner requires a compatible computer and scanning software. Then check the film format, holders, file formats you need and the licence terms for every computer you’ll use to scan. If you have lots of compatible 35mm film strips, automatic feeding can save you some of the manual work.
Who are the different workflows suited to?
Teams using multiple scanning computers
If you work across several computers, decide in advance which devices will be used for scanning and how you’ll bring the finished files together. Hamrick Software distinguishes between personal use on your own computers and use within organisations for VueScan.
Collections with different negative formats
For mixed collections, the film sizes actually supported and the holders available are key. reflecta lists formats 135, 127 and certain 120 formats for the x66-Scan.
Anyone digitising a large collection of 35mm film
When you have lots of 35mm film strips, feeding and file output are important factors. reflecta lists automatic feeding for compatible strips on the RPS 10S, while Plustek lists an infrared channel and SilverFast SE Plus 9 for the OpticFilm 8300i SE.
What should you consider when buying?
Standalone scanner with SD card
Best for: Scanning without a computer connected, then transferring the files to the computers being used.
Trade-off: The reflecta x66-Scan lists JPEG as its output format; TIFF master files are not documented for this model.
USB film scanner connected to a scanning computer
Best for: Adjusting colour negatives using software settings during scanning, then saving the files to a shared project folder.
Trade-off: The film format, operating system and software licence must all be suitable for the specific model and the computers you’ll actually use.
| Priority |
What to check when buying |
Who should pay particular attention? |
| Scanning station and file sharing |
Who will scan, where will the source files be stored, and which computers are covered by the specific software licence? |
If several people work on different computers, the file workflow needs to work from scanning through to the shared folder. Around 33% of consumers prioritise a workflow across multiple computers. |
| Negative format and holder |
Check the format and image size of your negatives against the scan area and holders for the specific model. |
If you want to digitise negatives in different sizes, first check that your films will actually fit the holders provided. Around 27% of consumers prioritise support for mixed film formats. |
| File format and editing |
Check which output formats the specific scanner and software combination provides, and how you’ll back up the original files. |
If several people will make colour or image adjustments later, the available source format affects the shared editing workflow. Around 20% of consumers prioritise editable source files. |
| Handling large numbers of strips |
Consider strip length, the number of frames allowed per pass, and the time needed to review and name files. |
If you want to scan lots of compatible 35mm strips, consider how often you’ll need to load strips and check the results. Around 20% of consumers prioritise high throughput. |
Common misconceptions
-
Assuming included software is licensed for every computer
VueScan’s terms distinguish between personal use on your own computers and use within organisations. So, included software doesn’t automatically mean you can use it at any number of scanning workstations.
Check the terms of the specific programme for every person and computer that will be used for scanning.
Depending on how you use the software and which computers are involved, you may need additional licences.
-
Confusing interpolated image size with sensor resolution
For the reflecta x66-Scan, the manufacturer lists a 14-megapixel sensor and an interpolated output of 22 megapixels. The higher interpolated figure does not represent the sensor resolution.
Compare the stated sensor or optical specifications with the output format you need, rather than focusing only on the largest number.
-
Assuming automatic feeding creates a ready-made archive
The reflecta RPS 10S’s automatic feeding is for compatible 35mm film strips. File storage, labelling and organising a shared project are still separate steps.
Allow time for a test run, from loading a strip to naming and backing up the file.
Even with automatic feeding, you’ll still need time to select, label and save files to a shared location.
A guide to relevant brands
reflecta
The models listed support different workflows: SD card output with the x66-Scan, and automatic feeding of 35mm film strips with the RPS 10S.
- reflecta lists a 14-megapixel sensor for the x66-Scan; its 22-megapixel output is interpolated.
- According to reflecta, the RPS 10S automatically feeds compatible film strips containing 3 to 40 frames and offers DNG output.
- The x66-Scan saves files as JPEG; the RPS 10S’s scan area and feed are designed for the documented 35mm originals.
Plustek
The OpticFilm 8300i SE is a computer-connected option for 35mm negatives, suited to workflows where you adjust settings and make corrections during scanning.
- Plustek lists an infrared channel and SilverFast SE Plus 9 for the OpticFilm 8300i SE.
- The positive review from F.A.Z. Kaufkompass applies to the different OpticFilm 135i model and cannot automatically be applied to the 8300i SE.
KODAK Photo Plus
The SLIDE N SCAN is a memory card option for the formats listed by the supplier: 135, 110 and 126.
- According to the supplier, the device saves digital files to an SD card.
- An SD card is required to use the device, but the supplier says one is not included. 120 film is not listed as compatible with this model.
Epson
The Perfection V850 Pro is a flatbed alternative if you also need to scan larger formats or paper originals as well as 35mm film.
- Epson documents holders for 35mm film and larger formats.
- Epson marks the V850 Pro as no longer available on its German product page, so it is not a confirmed current option for a new purchase there.
Related products on Joybuy
Related products coming soon.
Frequently asked questions
Do all contributors need to install the same scanning software?
No, not if only one computer is used for scanning and the other computers simply receive the finished image files. According to Hamrick Software, family members in the same household can use one VueScan licence on up to four computers that personally belong to the household. For non-personal use, a separate licence is generally required for every computer on which VueScan is installed.
Which memory card or additional software should I allow for?
It depends on the model. KODAK Photo Plus says that an SD card, which is not included, is required to use the SLIDE N SCAN. For the OpticFilm 8300i SE, Plustek lists QuickScan Plus and SilverFast SE Plus 9 as included software; this does not provide blanket permission for use by multiple people.
What are my rights in Germany if I buy a faulty scanner online?
If a product is faulty, you have statutory rights against the seller; these are separate from any voluntary guarantee. For consumer distance contracts, § 312g BGB generally provides a right to cancel, subject to statutory exceptions. § 355 BGB generally sets a 14-day period; the right to cancel is separate from your rights if goods are faulty.