Photographers who plan to edit later
If you want to make different adjustments to your colour negatives later, check the file output, software bundle and support for 35 mm film separately.
If you mainly want to view and share colour negatives with minimal fuss, a standalone scanner that saves JPEGs directly to an SD card could be a good choice. If you plan to make repeated adjustments on your computer, check which file formats are actually supported and what software is included. In either case, make sure the film formats and holders are compatible with your negatives.
If you want to make different adjustments to your colour negatives later, check the file output, software bundle and support for 35 mm film separately.
If your collection includes medium format or smaller formats as well as 35 mm, check the specific film types against the supported holders before choosing a file-format workflow.
If you want to view compatible negatives on the device and save them straight to an SD card as JPEGs, consider a standalone scanner that explicitly supports these features.
First decide whether JPEG files for viewing and sharing will be enough, or whether you want to edit your scans on a computer later. Then check that the supported film types and holders match your collection.
| What you’re looking for | What to check | Who needs to consider this? |
|---|---|---|
| File formats and editing | Check the output formats supported by the specific scanner and software combination, and find out which software licence is included. | If I want to adjust my colour negatives again later, I need a confirmed file output and suitable software. Around 36% of consumers prioritise editing their scans later. |
| Film formats and holders | Identify the film type and image dimensions, then check that both match the formats and holders explicitly supported. | If my collection includes several film formats, the holders must fit the specific negatives. Around 29% of consumers focus primarily on format compatibility. |
| Handling larger collections | Compare holder capacity and the number of manual steps involved. A stated scan time per image doesn’t automatically cover the whole archiving process. | If I want to digitise lots of negatives, the overall workflow matters more than a single time estimate. Around 21% of consumers prioritise throughput. |
| Set-up and storage | Check whether you need a suitable memory card or a compatible computer, and find out which software is included. | If I want to keep extra steps to a minimum when scanning, the workflow should fit the equipment I already have. Around 14% of consumers prioritise easy set-up. |
For the reflecta x66-Scan, the manufacturer lists a 14-MP sensor and an interpolated 22-MP setting. KODAK also distinguishes between sensor and interpolation figures for the SLIDE N SCAN described here.
Check the native sensor figure separately from interpolated output values, and also confirm which film holders you need and which file format is supported.
Rollei lists JPG and TIFF for the DF-S 180. The HDRi RAW post-processing described by SilverFast is a separate software workflow and isn’t automatically included with every scanner bundle.
Before planning a RAW workflow, check the specific model’s output formats, software edition, licence and compatibility.
You may need an additional software licence if the included package doesn’t support the workflow you want.
The documented film types vary: some devices are designed for 35 mm film, while others also support certain medium-format or smaller film formats.
Identify a few negatives from your collection and check each format against the device specifications and the holders available for it.
The standalone x44 and x66 models are designed to scan directly to an SD card as JPEGs. According to reflecta, the x66-Scan also supports certain medium-format films.
The OpticFilm models are computer-connected film scanners for 35 mm film. For the 8300i SE, Plustek lists SilverFast SE Plus 9 and QuickScan Plus.
The Perfection V600 Photo specifications list holders for 35 mm and 120/220 film, as well as JPEG and TIFF output.
For the computer-connected DF-S 180, Rollei lists saving scans as JPG or TIFF.
According to KODAK, the SLIDE N SCAN described here has a 5-inch screen, adapters for 135, 110 and 126, and direct SD card storage.
No. Saving a JPEG in a different way later won’t turn it into the original scanner RAW file. Before scanning, check whether the specific scanner and software combination can output and process raw data later. SilverFast describes HDRi RAW and the post-processing designed for it as a separate workflow.
First identify the film type and use the holder designed for it. For a standalone SD card scanner, you’ll need a compatible memory card. For a PC scanner, you’ll need a compatible computer and suitable scanning software. Check a test file before processing a larger batch.
Plustek lists SilverFast SE Plus 9 and QuickScan Plus for the 8300i SE. The Archive Suite described by SilverFast, however, includes Ai Studio and HDR Studio. Don’t assume these packages are the same, and check the licence and compatibility for the specific offer.
According to consumer information from the European Union, when you buy goods from a business, you’re generally entitled to a legal guarantee of at least two years from the date you receive them. This is separate from any additional manufacturer’s guarantee on offer. The rules described don’t apply in the same way to purchases from private sellers.
No. Germany’s Federal Ministry for the Environment explains that waste electrical equipment must be collected separately and taken to an authorised collection point, such as a local authority recycling centre. Whether a retailer must take it back without a new purchase depends, among other things, on the legal requirements and the dimensions of the device.