Which scanning workflows are right for you?

Reviewing 35 mm strips

If you want to digitise entire 35 mm strips first, then choose frames for a contact sheet, holder capacity and how often you need to reload it are important considerations.

Scanning without a computer nearby

If space is limited, you may prefer a standalone device and transfer the image files later, ready to create your contact sheet.

Reviewing several film formats

If you have medium-format film as well as 35 mm, check which formats and holders the device supports before choosing one.

What to look for when buying

Computer-connected 35 mm scanner

A good fit if: You mainly review 35 mm strips and want to scan several frames at a time. Plustek says the OpticFilm 135i can scan up to six frames from a strip in one pass.

The trade-off: A computer is part of the workflow, and the limited batch size means repeated reloading when you have a large collection. F.A.Z. Kaufkompass identifies this as a limitation.

Standalone 35 mm scanner

A good fit if: You don’t want a computer at your scanning station and are happy to save JPEG files to an SD card for selecting later. reflecta says the x33-Scan holder can take up to six 35 mm frames.

The trade-off: You’ll need to transfer the image files and arrange them in software to create a contact sheet; scanning alone won’t produce a finished PDF overview.

Standalone scanner for 35 mm and medium-format film

A good fit if: Your collection includes supported medium-format film as well as 35 mm. reflecta says the x66-Scan supports Type 127 and Type 120 formats from 6 × 4.5 cm to 6 × 9 cm.

The trade-off: Check that your specific film format fits the holder, and allow space not only for the scanner but also for feeding the film.

Existing flatbed scanner with transparency unit

A good fit if: You already have a compatible flatbed scanner and want to scan 120/220 film as well as 35 mm. Epson lists these formats for the Perfection V600 Photo.

The trade-off: Epson lists the V600 Photo as measuring 280 × 485 mm and no longer available in Germany.

What to consider What to look for Who should pay particular attention?
Frames per pass Check how many 35 mm frames the holder can take in one pass and what you need to do between strips. Plustek says the OpticFilm 135i can scan up to six frames from a strip; F.A.Z. Kaufkompass considers this batch size a limitation for large collections. If I want to review entire strips and reload as infrequently as possible, the number of frames per pass matters. Around 31% of consumers put strip throughput first.
Desk space Compare the scanner’s dimensions with the space needed for feeding film, cables and operation. Plustek lists the OpticFilm 135i as measuring 175 × 259,2 × 104,3 mm; according to reflecta, the x66-Scan measures 177 × 118 × 192 mm. If I’m scanning on a small desk, I need room for the device and film guide without blocking the rest of my workspace. Around 31% of consumers give space requirements top priority.
File output Check the file format and how files are transferred. According to the manufacturer, the reflecta x33-Scan and x66-Scan save JPEG files to an SD card; Adobe explains how to create a PDF contact sheet from selected images in Bridge. If I want to turn individual scans into a clear PDF, the process from the scanner’s output to the finished layout matters. Around 25% of consumers focus primarily on file output for later use.
Supported film formats Match the film type and frame format to the holder. reflecta says the x66-Scan supports Type 127 and Type 120 from 6 × 4,5 cm to 6 × 9 cm; according to Plustek, the OpticFilm 135i is designed for 35 mm film. If I want to review medium-format film as well as 35 mm, my film needs to fit the holder provided. Around 13% of consumers put support for additional film formats first.

Common misconceptions about film scanners

  • Confusing an on-screen preview with a finished contact sheet

    The standalone models described here initially save individual JPEG files. To create a PDF overview, you’ll need to transfer and select the files, then arrange them in suitable software.

    Plan your scanner, file transfer and contact sheet software as one complete workflow.

  • Mistaking interpolated pixel counts for sensor resolution

    For the x33-Scan, reflecta distinguishes between standard output and higher interpolated output. For the x66-Scan, the manufacturer lists 14 MP of sensor data and 22 MP interpolated output.

    Compare sensor and interpolated output figures separately, and check which file output you need for your contact sheets.

  • Measuring only the scanner’s footprint on your desk

    The scanner’s dimensions alone don’t tell you how much room you’ll need for the film holder, film feed and controls. You’ll also need access to the lid of a flatbed scanner.

    Measure your available workspace and check which way film is loaded and how the device is operated.

  • Assuming infrared dust correction works with every black-and-white film

    LaserSoft Imaging points out that infrared-based correction cannot be used with conventional black-and-white film.

    If you scan black-and-white negatives, handle them carefully and consider another post-processing method if needed.

Key brands at a glance

Plustek

The OpticFilm 135i is a computer-connected option for scanning several frames from a 35 mm strip in one pass.

  • Plustek says it can scan up to six frames from a strip or four slides per pass, and features a motorised film transport.
  • F.A.Z. Kaufkompass identifies the small batch size as a limitation for large collections; this assessment relates to the OpticFilm 135i.

reflecta

The x33-Scan is designed for 35 mm film, while the x66-Scan also supports certain medium-format film types.

  • reflecta says the x33-Scan holder can take up to six 35 mm frames, while the x66-Scan supports Type 120 film up to 6 × 9 cm.
  • According to reflecta, both models save JPEG files. You’ll need to create a contact sheet from the image files in a separate step.

Epson

The Perfection V600 Photo is worth considering as an alternative if you already own one, or want to scan other types of originals as well as 35 mm film.

  • Epson says this model can scan, among other things, two 35 mm strips with six frames each, as well as 120/220 film.
  • Epson lists a footprint of 280 × 485 mm and no longer lists the Perfection V600 Photo as available in Germany.

Joybuy products

Related products coming soon.

Frequently asked questions

Does a film scanner create a digital contact sheet directly?

The scanning workflows described here initially produce individual image files. Adobe explains how to put selected images together as a PDF contact sheet in Bridge; first, check how files are transferred from your scanner.

Do all film scanners support medium-format film?

Check the film format and holder for the specific model. reflecta says the x66-Scan supports Type 127 and Type 120 from 6 × 4,5 cm to 6 × 9 cm; according to the manufacturer, the Plustek OpticFilm 135i is designed for 35 mm film.

What should I bear in mind when cleaning and scanning black-and-white film?

First, check that your film and holder are compatible with the model, and keep your originals as dust-free as possible. LaserSoft Imaging points out that infrared-based correction cannot be used with conventional black-and-white film.

What are my rights if I buy online or a product develops a fault?

The Verbraucherzentrale says that online purchases generally come with a 14-day cancellation period from the date the contract is concluded or the goods are received; exceptions may apply. Your statutory rights against the seller are separate from any voluntary guarantee.

Can I digitise someone else’s film photographs and share the contact sheet?

Under certain conditions, § 53 UrhG allows individuals to make individual copies for private, non-commercial use; it does not generally permit the distribution or public display of those copies. If you want to share a contact sheet publicly or commercially, check the rights to the specific images.