Which scanner is right for your group?

Groups with loose maps up to A3

If you want to capture maps in as few passes as possible, compare their dimensions with the usable glass area. Canon Germany lists an A4 scan area for the CanoScan LiDE 400, while Plustek Germany gives up to 29.7 × 43.1 cm for the OpticSlim 1180.

Groups with large-format maps

If your maps may not fit on an A3 flatbed, you could look for a larger scan area or plan to scan them in sections. The German Federal Archives describes digitising large maps as a particular technical challenge.

Groups with delicate originals

If your maps are fragile, folded or bound, assess how they can be handled before scanning. Guidance from the German Federal Archives and the Hesse Archive Advisory Service highlights how the condition of the original and suitable support can make a difference.

What should your group look for when buying?

Start by considering the map size and the condition of the original. A larger scanner is only useful if its usable area fits the item and the map can be placed on it safely.

A4 flatbed

Suitable if: The maps you need to scan fit fully on the scan area and you want a compact shared workspace.

Trade-off: Larger maps cannot be captured in full in a single pass, and a higher resolution does not increase the scan area.

A3 flatbed

Suitable if: Your maps are larger than A4 but fit on the specific A3 scan area. Plustek gives up to 29.7 × 43.1 cm for the OpticSlim 1180; VIISAN lists the VF3240 as an A3 flatbed scanner.

Trade-off: A3 still has its limits. Make sure the footprint, drivers and output formats you need are right for your shared workspace.

Larger flatbed or digitisation service

Suitable if: Your maps are larger than the A3 scan area and you want to capture as much of them as possible. Image Access describes the WideTEK 24F as an A2+ flatbed scanner.

Trade-off: Check the space required, the actual scan area and the condition of your originals. If you only need to scan large-format items occasionally, a digitisation service may be an alternative to buying a device.

Measure your largest map, including any margins you want to retain in the digital copy, and compare its dimensions with the usable scan area. For fine lines and small text, check whether a test scan reproduces the details you need clearly.

What matters What to check when buying Who should pay particular attention
Usable scan area Measure your largest map, including any margin you need, in millimetres and compare it with the maximum scan area. I want to capture my largest map in a single pass if possible. Around 36% of consumers put a suitable scan area first.
Protecting the originals Check the condition, folds and binding; arrange suitable conservation support for fragile maps. When digitising delicate or bound maps, safe handling matters more to me than a quick process. Around 29% of consumers put protecting originals first.
Clarity of fine details Check the optical resolution and make a test scan featuring the smallest relevant lines or labels. I want fine lines and small labels to remain legible, so I check the result using a representative map. Around 21% of consumers prioritise capturing detail.
Shared workflow Check the drivers for your group’s computer, where files will be saved, file formats, available space and who will check the files. For several group members, I need a repeatable process and a reliable place to store files. Around 14% of consumers put a shared workflow first.

The German Research Foundation’s 2009 guidance gives 400 dpi as a possible setting for maps with very fine lines or text. This is a potential project setting, not a general buying requirement; check the legibility of the actual digital copy.

Avoid common buying mistakes

  • Assuming A3 means “fits every map”

    An A3 flatbed still has a limited usable area. If a map is too large, you will need a different scanning approach.

    Before buying, measure the map, including any margins you want to retain in the digital copy.

    If a map does not fit in a single pass, you may need to scan it in sections and edit the results afterwards.

  • Judging a scanner only by its advertised maximum resolution

    A high dpi figure does not increase the scan area, nor does it prove that the smallest details you need will be legible in the finished digital copy.

    Test a representative sheet using the setting you need for your intended purpose, then check the relevant lines and labels.

    Higher settings can mean larger files and more time spent checking and editing them.

  • Handling delicate maps like sturdy loose sheets

    With fragile, folded or bound originals, their condition may determine which handling and scanning methods are suitable.

    Assess the original before placing it on the scanner and seek expert support if needed.

    Problematic originals may need additional conservation support.

Relevant brands to consider

Canon

The CanoScan LiDE 400 is an A4 flatbed scanner for individual maps that fit on its scan area.

  • Canon Germany lists a maximum scan area of 216 × 297 mm and USB-C.
  • Larger maps cannot be captured in full in a single pass with this scan area.

Plustek

The OpticSlim 1180 and OpticPro A320E are A3 flatbed ranges for maps that fit on their respective scan areas.

  • Plustek Germany lists up to 29.7 × 43.1 cm for the OpticSlim 1180, as well as TWAIN/WIA.
  • An A3 scan area will not cover every map size, so check the dimensions and workspace in advance.

VIISAN

The VF3240 is listed as an A3 flatbed scanner for larger individual sheets that fit on its scan area.

  • VIISAN lists an optical resolution of 2,400 × 2,400 dpi and an A3 colour scan time of four seconds, specifically at 200 dpi.
  • The stated scan time applies to this setting and format; it does not indicate the speed at other settings.

Image Access

The WideTEK 24F is a large-format flatbed option for when an A3 scan area is not enough.

  • Image Access describes A2+ capture and a lid that can be adjusted or removed.
  • Check the exact dimensions, space required and how the specific original will need to be handled.

Avision

The FB6280E is an A3 flatbed scanner with a book-edge design, which may be worth considering for bound items.

  • Avision lists an optical resolution of 600 dpi and a book-edge design.
  • The design does not replace an assessment of the item’s condition or automatically eliminate conservation risks when handling delicate bound maps.

Suitable products on Joybuy

Suitable products coming soon.

Frequently asked questions

Is an A3 scanner big enough for every paper map?

No. Compare the entire area you need to scan with the usable area of the specific device. Plustek lists up to 29.7 × 43.1 cm for the OpticSlim 1180.

How do we set up a scanner for several group members?

Before buying, check that the drivers and scanning software will work on your shared computer, and agree on a consistent save location and a visual check of the files. The PDF and interface features Plustek describes for the OpticSlim 1180 are specific to that model and are based on the manufacturer’s information.

What resolution should we use for small text on maps?

Choose a setting based on the smallest details that need to remain legible, then check a test scan. In its practical guidance from April 2009, the German Research Foundation gives 400 dpi as a possible historical project reference for maps with very fine lines or text, not as a general legal requirement.

Can we publish scanned maps on our website?

Not simply because your group owns the paper map or scanned it itself. German copyright law lists maps as possible protected works and sets out the right of reproduction in § 16. You will need to check on a case-by-case basis whether rights, permission or an exception apply to the specific map and planned publication. The fact that it is for a group does not automatically mean you have permission to publish it.