Who uses a flight simulator panel?

Light aircraft pilot with limited desk space

You want easy access to frequently used cockpit functions without leaving a large setup out permanently. The device’s dimensions and whether you can put the panel away again will help determine your choice.

VFR pilot who wants real switches

You want to operate the ignition, lights or landing gear in your simulated light aircraft using physical controls rather than a mouse. What matters is which of these functions your aircraft actually has.

Avionics pilot focused on navigation and procedures

You often adjust radio frequencies, courses, the transponder or autopilot, and need to choose between a versatile control unit and a replica GPS navigator.

Which features matter most?

First, decide which inputs you often make using the mouse. Then check whether your aircraft supports those functions and whether the panel, cables and mounting will fit on your desk.

What matters What to check before buying Who should pay particular attention
Small footprint Check the device dimensions, not the packaging size, and allow for the space needed for cables and mounting. Octavi lists the IFR-1 at 112 × 74 × 46 mm; Honeycomb Aeronautical gives the Sierra TPM Module’s dimensions as 298 × 303 × 123 mm. If I want to put the panel away after flying or keep space for my controls, keyboard and screen, its footprint matters most. Around 36% of consumers put a small footprint first.
Direct-access switches Check that the ignition, lights and landing gear match the functions in your preferred aircraft. Logitech G specifically lists the landing gear LED as compatible with FSX and Prepar3D. If you prefer to operate the ignition and other light aircraft functions directly, rather than using a mouse, look for controls that match your aircraft. Around 29% of consumers prioritise physical switches.
Radio and avionics Check whether the aircraft uses COM/NAV, FMS, an autopilot or a GNS530, and whether profiles, a plug-in or display connections are required. If I often use the radio, navigation or autopilot, the panel needs to match the avionics in my aircraft. Around 21% of consumers prioritise avionics controls.
Engine controls Check that the axes and controls match your simulated aircraft, and measure the space available for the device and its mounting. Honeycomb Aeronautical gives the Sierra TPM Module’s dimensions as 298 × 303 × 123 mm. Consumers who need separate throttle, propeller and mixture controls should first check that their aircraft has the right functions and that there is enough space. Around 14% prioritise engine controls.

Which buying mistakes can you avoid?

  • Buying a large engine control unit without measuring your desk

    These devices are designed for different tasks: Octavi lists the IFR-1 at 112 × 74 × 46 mm, while Honeycomb Aeronautical gives the Sierra TPM Module’s dimensions as 298 × 303 × 123 mm.

    First decide which function you need, then measure the space actually available beside your controls, screen and cables.

  • Assuming compatibility means everything is ready to use

    A general statement about simulator compatibility does not automatically confirm that every display and function will work in every aircraft. Logitech Support lists 29 December 2020 as the last update for its published MSFS plug-in; this does not confirm every combination with MSFS 2024.

    Check the exact simulator version, aircraft and panel function separately.

    Profiles, plug-ins and function assignments may require additional setup.

  • Treating a GPS navigator like an ordinary USB button panel

    According to the manufacturer, setting up the RealSimGear GNS530 involves a plug-in and a remote GPS display. An HDMI connection is also required.

    Before choosing one, check that your aircraft uses the right avionics and that you have suitable display connections and space to position it.

    RealSimGear states that the HDMI cable is not included; depending on your setup, you may also need to plan for a suitable mounting solution.

Key brands for flight simulator panels

Octavi

The IFR-1 combines several avionics functions in one compact control unit, making it suitable for setups with limited desk space.

  • Octavi lists dimensions of 112 × 74 × 46 mm and context modes for COM/NAV, FMS, autopilot and transponder. A plug-in is used to connect it to the simulator.
  • The button assignments change with the selected mode, so the device is not a replacement for dedicated ignition, lighting or throttle controls.

Logitech G

Separate Switch, Multi, Radio and Instrument Panels each offer specific switch, autopilot, radio or display functions.

  • The Switch Panel is designed for the ignition and other switches, the Multi Panel for autopilot and trim, and the Instrument Panel for changeable displays.
  • Using several devices means more mounting is needed. Logitech Support lists 29 December 2020 as the last update for its published MSFS plug-in; this does not confirm that every panel works fully with MSFS 2024.

Honeycomb Aeronautical

The Sierra TPM Module combines engine controls for simulated piston aircraft, while the Bravo Throttle Quadrant adds a configurable throttle quadrant with an autopilot panel.

  • Honeycomb Aeronautical lists separate throttle, propeller and mixture controls for the Sierra, and GA levers and an autopilot panel among the features of the Bravo.
  • According to Honeycomb Aeronautical, the Sierra TPM Module measures 298 × 303 × 123 mm. Check its size and shape, your desk space and the functions in your simulated aircraft before choosing it.

Thrustmaster

The MFD Cougar Pack offers programmable buttons rather than a panel designed specifically for light aircraft.

  • Thrustmaster lists two MFDs with a total of 48 programmable controls, plus an FSX layout card for light aviation.
  • The manufacturer also positions the product for military aviation. The FSX layout card does not confirm that a ready-made MSFS 2024 profile is available for light aircraft.

RealSimGear

The GNS530 is aimed at buyers who specifically want to recreate the controls of this simulated GPS navigator.

  • RealSimGear lists support for X-Plane 11/12 on Windows and MSFS 2020/2024.
  • A plug-in, a remote GPS display and an HDMI connection add to the setup. The manufacturer says the HDMI cable is not included. The aircraft must also have the matching navigator.

Related products

Related products will be available soon.

Frequently asked questions about flight simulator panels

Do I need a joystick or yoke as well as a panel?

A control panel does not automatically serve as your primary flight control. For PC use, the Microsoft Flight Simulator Team recommends a gamepad or joystick for aircraft control and drone mode, in addition to a keyboard and mouse. An extra avionics panel adds to this setup.

Will every panel described as MSFS-compatible work without setup in MSFS 2024?

No, you should not assume that. Octavi describes a plug-in installation for the IFR-1, while Honeycomb provides profiles and LED drivers for MSFS 2024, among other things. Logitech Support lists 29 December 2020 as the last update for its published MSFS plug-in. So check the combination of panel, simulator version and aircraft.

How should I plan a setup for a small desk?

First measure the space available beside your existing controls. Octavi lists the IFR-1 at 112 × 74 × 46 mm, while Honeycomb Aeronautical gives the Sierra TPM Module’s dimensions as 298 × 303 × 123 mm. Then check the mounting and cable routing; RealSimGear states that the HDMI cable for the GNS530 is not included.

What are my rights when shopping online in Germany?

Many online purchases generally come with a 14-day right to cancel. The Verbraucherzentrale notes that this usually applies from the date the contract is concluded or the goods are received. If a product is faulty, your statutory rights are against the seller; these are separate from any voluntary manufacturer’s warranty.

What should I check for product safety, and how do I dispose of an old panel?

The Bundesnetzagentur lists the CE marking and product and manufacturer details among the points checked during market surveillance. According to the Umweltbundesamt, old electrical equipment must not go in household waste; it should be taken to an appropriate separate collection point.