Who would benefit from an additional panel?

Pilots with limited desk space

If there’s little room beside your joystick or yoke, measure the available space, including the cable route, and consider whether you’ll want to put the panel away after flying. The Microsoft Flight Simulator team lists available space as one factor to consider when choosing your hardware setup.

Radio and navigation users

If you regularly change frequencies or navigation settings on virtual routes, decide whether you’d rather switch between functions or use dedicated controls for them. Octavi describes context-sensitive controls on the IFR-1, while Logitech G’s Radio Panel has dials and displays for radio and navigation settings.

Checklist and switch enthusiasts

If you prefer to manage relevant procedures using physical switches, check that their functions match the aircraft you actually fly. Logitech G lists a magneto switch and landing gear lever among the features of its Switch Panel.

Which buying criteria matter?

Compact, programmable keypad

A good fit if: You want direct access to a few commands of your choice while taking up as little desk space as possible. Elgato lists six customisable keys and dimensions of 84 × 60 × 58 mm for the Stream Deck Mini.

Bear in mind: You’ll need to organise your assignments if you want to access more commands; hotkeys only work with commands that have been set up accordingly.

Compact radio and navigation controller

A good fit if: You regularly adjust radio, navigation or transponder settings on your routes and want a compact device to do so. Octavi lists dimensions of 112 × 74 × 46 mm for the IFR-1.

Bear in mind: The rotary control changes function depending on the selected context mode. Octavi also requires you to install a simulator plug-in.

Dedicated switch or radio panel

A good fit if: You prefer dedicated controls for relevant switch procedures or COM and NAV settings. Logitech G describes these uses for its Switch Panel and Radio Panel respectively.

Bear in mind: Each specialist panel covers specific tasks and needs extra space; its available functions must suit the aircraft you fly.

Universal panel with axis levers

A good fit if: You want extra physical axes alongside configurable inputs and have enough room for the panel. VIRPIL lists four axis levers and desktop feet for the Universal Control Panel #3.

Bear in mind: Check how it will sit alongside your existing controls and how its inputs can be assigned for your aircraft.

For a small desk, the key is finding the right balance between space, the tasks you need to handle and the controls you want within easy reach.

What you need What to check before buying Who should prioritise it?
Space and direct access Measure the available space, including the cable route, and compare it with the device dimensions. Count how many commands you want to access without switching modes. If there’s little room beside your existing controls and you want direct access to a few commands, this is a priority for around 33% of consumers.
Radio and navigation Check which COM, NAV, transponder and autopilot functions your aircraft uses, and whether the specific panel supports them with your simulator version. If you regularly change radio or navigation settings on virtual routes, this way of controlling them is a priority for around 25% of consumers.
Physical switches Check that magneto switches, landing gear levers and other controls match the functions available in your aircraft. If you prefer to manage relevant aircraft procedures using dedicated switches rather than changing button assignments, around 25% of consumers pay particular attention to this.
Flexible assignments Check which software and simulator version you’ll need, then test your assignments with a specific aircraft to identify any conflicts. If you want to customise inputs for different aircraft and don’t mind setting them up, this is the main priority for around 17% of consumers.

Which buying mistakes can you avoid?

  • Measuring only the panel, not the whole setup

    Even a small device needs to be within easy reach beside your existing controls. Cables and mounting can also affect how much space you need.

    Measure the usable space and sketch out where all your devices will go before buying.

    Allow room for cables and, if necessary, for moving your existing controls around.

  • Assuming simulator support means every aircraft function is supported

    Support for a device or simulator doesn’t automatically mean that every function will be assigned appropriately in every aircraft. The IFR-1 also uses context modes and requires a simulator plug-in.

    Check your simulator version and the aircraft you fly. Then set up the inputs you need and test for possible assignment conflicts.

  • Choosing a specialist panel for the wrong task

    A switch panel and a radio panel offer different controls. A magneto switch won’t replace the dials you need for frequent COM or NAV adjustments.

    Make a note of the controls you use most, then choose between switches, radio controls and freely assignable buttons.

Which brands offer flight simulator panels?

Octavi

The IFR-1 combines instrument, radio and navigation inputs in a compact multi-purpose controller.

  • According to Octavi, the rotary control and action buttons work differently depending on the selected context mode.
  • You’ll need to install a simulator plug-in; check that it supports your version and aircraft.

Elgato

The Stream Deck Mini and Stream Deck + are customisable input devices, not instrument panels designed exclusively for flight simulation.

  • Elgato lists six buttons and dimensions of 84 × 60 × 58 mm for the Mini; the Stream Deck + has eight buttons and four dials.
  • Hotkeys need to be set up correctly, and assigning a button doesn’t automatically confirm compatibility with every aircraft function.

Logitech G

The Switch Panel and Radio Panel are designed for different tasks: switch functions and radio and navigation settings respectively.

  • The manufacturer’s descriptions list a magneto switch and landing gear lever among the Switch Panel’s features, as well as controls for COM and NAV settings on the Radio Panel.
  • Check that the controls on each panel suit the functions available in your aircraft.

VIRPIL Controls

According to the manufacturer, the Universal Control Panel #3 offers configurable inputs and four axis levers for a more extensive setup.

  • VIRPIL includes feet for using the panel on a desk.
  • Measure the space beside your existing controls and check which inputs you actually need.

Joybuy product selection

Related products will be available soon.

Frequently asked questions

Do I need an additional panel for virtual island-hopping routes?

No, an additional panel isn’t essential for flying on a PC. The Microsoft Flight Simulator hardware guide outlines different setup options; start by deciding which inputs you actually want to move to a separate panel.

How do I set up a panel for different aircraft in MSFS 2024?

First, select the detected device in the control settings and check the relevant profile. Microsoft describes general profiles, profiles for aircraft categories and model-specific profiles; you may need to assign functions manually. Then test for any assignment conflicts.

What should I know about software and hotkeys?

According to the manufacturer, you’ll need to install a simulator plug-in for the Octavi IFR-1. With customisable buttons, the simulator commands you want to use must match the hotkeys you’ve set up. Before buying, check the requirements for your specific combination of panel, simulator version and aircraft.

Who should I contact about a fault after buying in Germany?

For consumer purchases, your statutory rights generally apply against the seller and are separate from any voluntary guarantee. If a product is faulty, the first step may be to request a repair or replacement. The Verbraucherzentrale explains the difference.

How should I dispose of a flight simulator panel in Germany?

Don’t put electrical equipment in your household rubbish. Dispose of it separately instead. The Umweltbundesamt explains how to dispose of electrical equipment separately.