Who are the different controls for?

Pilots with limited desk space

If you need to fit a panel, your existing controls and room to move your hands into a tight space, the device dimensions and mounting method matter. Octavi, VKB and Honeycomb list different dimensions for their respective devices, so check that you have enough room for the fully assembled setup too.

Pilots practising throttle control

If you want to control throttle with a lever rather than the keyboard during a virtual take-off, check the available axes, detents and aircraft-specific settings. Thrustmaster describes two throttle levers with removable detents, while VKB lists three analogue axes for the GNX THQ.

Pilots practising checklists

If you want to use physical switches for routine pre- and post-take-off steps, check which functions your simulated aircraft actually uses. Logitech G describes features on its Switch Panel including an ignition rotary switch and a landing gear lever.

What should you look for when buying?

First, make sure there’s room on your desk for a panel as well as your existing controls. Then choose between a throttle axis, take-off switches or controls designed for a particular aircraft.

Consideration What to check when buying Who is it important to?
Desk space and reach Compare the casing, lever travel, cable outlet and mounting method with your setup. Octavi lists dimensions of 112 × 74 × 46 mm for the IFR-1, and VKB lists 26 × 15 × 12 cm for both the SEM and THQ; Honeycomb Aeronautical lists 273 × 382 mm for the Bravo, excluding the mounting plate or clamp. If you have limited desk space, you’ll want to reach the controls without obstructing your joystick or yoke. Around 36% of consumers put available space first.
Throttle during take-off Check the number of axes, whether the detents can be removed, and whether there’s a suitable aircraft profile. Thrustmaster lists two throttle levers with removable detents for the TCA Quadrant Airbus Edition; VKB lists three analogue axes for the GNX THQ. If you want to set the throttle with a physical axis during a virtual take-off, the right lever controls matter more than extra switches. Around 29% of consumers prioritise throttle control.
Pre-flight preparation with switches Check which switches are supported by your simulator and the aircraft you fly most often. Also decide whether you want fixed functions or freely assignable inputs. If you’d rather control the ignition, lights or landing gear with physical controls than use a mouse or keyboard, focus on the functions you actually need. Around 21% of consumers prioritise take-off switches.
Aircraft-specific controls Compare the intended control layout with the aircraft you prefer and check how it maps in your simulator. If you mainly fly a particular aircraft profile, the layout should suit its procedures. Around 14% of consumers prioritise a suitable aircraft replica.

Which buying mistakes can you avoid?

  • Confusing a switch panel with a throttle quadrant

    A switch panel such as the Logitech G Flight Simulator Switch Panel controls functions including the ignition and landing gear. The Thrustmaster TCA Quadrant, on the other hand, has throttle levers.

    Before buying, decide whether you mainly want to operate switches for pre-flight checks or adjust the throttle during take-off.

  • Measuring only the panel itself

    The dimensions listed for the Honeycomb Bravo explicitly exclude the mounting plate and clamp. You also need to allow for lever movement and your existing controls.

    Check the full assembled setup and make sure you’ll have room to move everything on your desk.

  • Assuming a GNX module works as a standalone USB device

    VKB lists the GNX USB Controller (HID-Main) as an additional requirement if you want to connect the GNX SEM or THQ to a PC individually via USB.

    Before buying, check whether you already have a compatible module setup or need the controller.

  • Assuming an aircraft-specific layout is suitable for every aircraft

    Airbus-inspired detents and an F/A-18-inspired switch layout are designed around different procedures.

    Choose based on the aircraft you actually fly, and check the control assignments in your simulator.

Which brands are worth considering?

Logitech G

The Flight Simulator Switch Panel is aimed at users who want to operate pre-flight functions and more using physical switches. The Flight Multi Panel is more geared towards autopilot, flaps and trim.

  • According to Logitech G, the Switch Panel has an ignition rotary switch and a landing gear lever. The manufacturer’s instructions describe how to attach it to a desk or an existing Logitech Flight Yoke.
  • It does not have a dedicated analogue throttle axis.

VKB

The GNX SEM is a module with freely assignable inputs, while the GNX THQ offers analogue throttle axes for a modular desk setup.

  • VKB lists dimensions of 26 × 15 × 12 cm for both modules.
  • According to VKB, a separately sold GNX USB Controller is required to connect an individual GNX module to a PC via USB. Assignments and setup are therefore part of the buying decision.

Thrustmaster

The TCA Quadrant Airbus Edition is designed for Airbus-inspired throttle control on PC.

  • Thrustmaster lists two throttle levers and removable detents.
  • Its controls are more specialised than those of a neutral, freely assignable module; additional TCA components are sold separately.

MOZA

The MTLP is an F/A-18-inspired switch panel for take-off and landing procedures on PC.

  • According to MOZA, the panel works independently via USB and can sit on a desk.
  • A desk clamp is optional. The described inputs include switches and levers for the brake and arresting hook, but there’s no integrated throttle control.

Honeycomb Aeronautical

The Bravo Throttle Quadrant is aimed at users who want throttle controls and additional cockpit functions in a larger unit.

  • Honeycomb lists configurable levers and autopilot functions.
  • According to the manufacturer, it measures 273 × 382 mm, excluding the mounting plate or clamp. Check the depth carefully against the space available.

Octavi

The IFR-1 is a compact instrument control device for users who care more about radio and navigation than dedicated take-off levers.

  • Octavi lists dimensions of 112 × 74 × 46 mm and support for Microsoft Flight Simulator 2020 and 2024, as well as X-Plane 11 and 12.
  • The standard functions described focus on instruments, radio and autopilot rather than throttle control.

Which flight controls are available at Joybuy?

The Joybuy products below are joystick or HOTAS flight simulator controls, not standalone cockpit switch panels. They may be worth considering if you want to control the aircraft’s attitude as well as the throttle during a virtual take-off.

Thrustmaster T-16000M FCS Joystick

Thrustmaster T-16000M FCS Joystick

If you want to control both the throttle and aircraft attitude with one device during a virtual take-off, this model includes throttle control and four axes, according to the product details.

Other listed features include a twist rudder axis, HallEffect sensors, 16 action buttons and programmable T.A.R.G.E.T software.

View at Joybuy
Thrustmaster T.Flight HOTAS One

Thrustmaster T.Flight HOTAS One

If you want to control both throttle and direction with a HOTAS system during take-off, this model combines a joystick with a detachable, full-size throttle, according to the product details.

The product description lists PC compatibility and dimensions of approximately 26,5 × 26,4 × 24,2 cm. It also says that the throttle can either stay attached to the stick or be used separately.

View at Joybuy

Frequently asked questions about flight simulator controls

For a virtual take-off, should I choose a switch panel or a throttle quadrant?

An analogue throttle axis is the more direct choice if you want to control the throttle physically. If you want to operate the ignition, lights or landing gear, a switch panel is a better fit. A freely assignable module can handle different functions, provided the connection and assignments are right.

Can I connect the VKB GNX SEM to a PC directly via USB on its own?

For standalone USB connection to a PC, VKB says you’ll need the GNX USB Controller (HID-Main), which is sold separately. Other connection options apply when it’s used as part of a compatible module setup.

How can I attach a panel to a small desk?

The manufacturer’s instructions for the Logitech G Flight Simulator Switch Panel describe attaching it to a desk with hook-and-loop strips or mounting it on an existing Flight Yoke System. Allow room for levers and cables too, and follow the instructions for your particular model when cleaning or carrying out maintenance.

What are my return and faulty goods rights when buying online in Germany?

For eligible distance sales from a business, you generally have a 14-day right to cancel, starting from the day you receive the goods; exceptions and rules on return postage apply. The European Union’s consumer information distinguishes this from your statutory rights regarding faulty goods and explains that goods bought from traders are covered by a minimum two-year legal guarantee. A voluntary manufacturer’s guarantee does not replace these rights.

What should I check before buying an imported electrical panel?

Before buying, check the seller, the product’s identity and the markings and information required for that specific device. The Bundesnetzagentur’s market surveillance guidance lists the CE marking, manufacturer details and instructions in German among the relevant formal requirements; this does not mean that any particular listing meets them.