Who are the different types of throttle suited to?

Bush pilots who want separate engine levers

If you already have a joystick or yoke, you can assign the engine functions that matter for your virtual aircraft to separate, easily accessible axes. Logitech G specifies three levers, while VKB lists three analogue axes for the GNX THQ.

Multi-monitor pilots who need buttons

If you want to use commands without reaching for the keyboard beside your screens, the layout on the grip is an important factor to consider. Thrustmaster lists 14 action buttons and an eight-way POV switch for the TWCS.

Pilots who fly different aircraft types

If you fly other virtual aircraft as well as bush planes, reconfigurable levers can be useful. Make sure you have enough space for the device, its mount and the full lever travel.

What should you look for when choosing?

Separate three-lever quadrant

A good fit if: You already have flight controls and want to assign several functions to separate levers.

Consider: Three levers offer fewer separate positions than the six-lever Honeycomb Bravo. Also check that the clamp and lever travel will work with your desk.

Larger, reconfigurable quadrant

A good fit if: You fly different aircraft types and want extra levers and an integrated control panel.

Consider: Honeycomb Aeronautical gives the Bravo’s dimensions as 273 × 382 × 198 mm, excluding the mounting plate and metal clamp. Measure the full space you’ll need.

Modular three-lever quadrant

A good fit if: You want a modular setup with three analogue axes and can factor your existing VKB modules into your plans.

Consider: According to VKB, connecting the GNX THQ directly to a PC via USB requires a GNX USB Controller, sold separately.

Throttle with buttons on the grip

A good fit if: You want frequently used commands within easy reach on the grip, and this matters more to you than having several engine levers side by side.

Consider: The TWCS isn’t a three-lever quadrant, so check that you can assign the functions you need in your simulator.

Factor What to look for Who will find it most important?
Separate axes Check the functions you need for the aircraft you fly most often, and whether you can assign them to the right axes in your simulator. If I want to assign engine functions to separate levers, having the right axis assignments matters to me. Around 36% of consumers would say that separate, configurable axes are their top priority.
Controls on the grip Compare the buttons and switches within easy reach with the commands you want to use while looking between monitors. If I want to use frequently needed commands without reaching for the keyboard, the controls on the grip are essential. Around 29% of consumers would say that easy-to-reach controls are their top priority.
Desk space and mounting Measure the desk space, including the desk edge, mounting hardware, cables and the full lever travel. If you need an accessible space alongside your existing input devices, check the whole setup. Around 21% of consumers would say that desk space and mounting are their top priority.
Connection and extras Check how the device connects to your PC or existing modules, and whether you’ll need any additional components. If I want to add a device to my existing setup, a suitable connection and all the necessary components are important. Around 14% of consumers would say that connectivity and required extras are their top priority.

Avoid common buying mistakes

  • Assuming lots of buttons mean separate engine levers

    A throttle with buttons on the grip has a different layout from a quadrant with several axes side by side. The right choice depends on the functions you need for the aircraft you fly most often.

    List the functions you need, then decide whether you’re looking for easy-to-reach commands or separate levers.

  • Measuring only the device casing

    Honeycomb Aeronautical explicitly excludes the mounting plate and metal clamp from the Bravo’s stated dimensions.

    Measure your desk space and desk edge alongside your existing equipment, and allow room for the cables and full lever travel.

  • Assuming a module is a standalone USB throttle

    With the VKB GNX THQ, attaching it to compatible VKB modules and connecting it directly to a PC via USB are two different connection options. According to VKB, direct USB connection requires an additional GNX USB Controller.

    Before deciding, check which modules you already have and what’s included for the connection method you want.

Key brands at a glance

Logitech G

The Flight Throttle Quadrant is a separate three-lever setup designed to work with existing flight controls.

  • According to Logitech G, the lever knobs are interchangeable and adjustable mounting clamps are included.
  • Three levers don’t match the Honeycomb Bravo’s six-lever layout, and the right assignments for every virtual aircraft aren’t guaranteed.

Honeycomb Aeronautical

The Bravo is designed for users who want to reconfigure levers for different types of virtual aircraft.

  • Honeycomb Aeronautical lists six levers, levers for general aviation and airliners, and an integrated autopilot control panel.
  • The stated dimensions exclude the mounting plate and metal clamp, so measure the space you’ll need for the complete setup.

VKB

The GNX THQ is a modular throttle quadrant with three analogue axes.

  • VKB lists adjustable levers and the ability to connect to compatible GNX or Gladiator modules.
  • The GNX THQ doesn’t include the separately required GNX USB Controller for direct connection to a PC via USB.

Thrustmaster

The TWCS puts commands within easy reach on the grip, while the TCA Quadrant Airbus Edition is a separate, Airbus-inspired dual-lever quadrant.

  • Thrustmaster lists 14 action buttons and an eight-way POV switch for the TWCS. The manufacturer says you can disable the detents on the TCA Quadrant Airbus Edition.
  • The TWCS doesn’t have the lever layout of a three-lever quadrant. The TCA’s Airbus-inspired design doesn’t mean it has the right separate engine levers for the bush aircraft you fly most often.

Suitable products on Joybuy

Related products coming soon.

Frequently asked questions

Do I need a special throttle because I use multiple monitors?

No. Your screen setup and choice of engine controls are separate decisions. Microsoft Flight Simulator documents additional render windows for Microsoft Flight Simulator 2020; this doesn’t mean the same setup will work in other simulators or versions. Choose your throttle based on the aircraft’s functions, accessibility and the space you have available.

How do I set up a new throttle lever?

First, check the manufacturer’s instructions for connecting it to a PC. Then assign the axes to your aircraft’s functions in the simulator you use. For example, Thrustmaster describes an engine selector switch for the TCA Quadrant Airbus Edition and recommends a direct USB connection. These device-specific instructions don’t automatically apply to other models.

What extras and consumer rights should I check when buying online?

Check what’s included: a GNX USB Controller is also required to connect the VKB GNX THQ directly to a PC via USB as a standalone device. According to consumer information from the European Union, when you buy from a trader you’re generally entitled to a legal guarantee of at least two years from the date you receive the goods. Goods bought online generally come with a 14-day right to cancel from delivery, subject to the applicable exceptions. This is separate from any voluntary manufacturer’s warranty.

Does electronic equipment sold in Germany need a CE marking?

A CE marking is required if the device is covered by harmonised EU rules that require one. The European Union lists electrical and electronic equipment as a product group, but the specific rules that apply to the product are what matter. The CE marking is a declaration made by the manufacturer, not a quality mark awarded by a central EU body.