For virtual navigation flights, a configurable quadrant is better suited to switching between different aircraft, while Airbus detents are most useful if you mainly practise the corresponding procedures. An integrated autopilot panel is worth considering if you want to operate these functions directly on the device. Logitech G lists three levers, Thrustmaster’s TCA Quadrant Airbus Edition has two throttle axes with adjustable detents, and Honeycomb Aeronautical’s Bravo has six levers plus an autopilot panel. Then check the number of levers and how they can be assigned in your simulator, as well as the space required for the clamp and lever movement. Having multiple monitors alone doesn’t mean you need a particular model.
Who would benefit from a throttle quadrant?
Pilots who switch between aircraft
If you practise flying a range of single- and multi-engine aircraft, you’ll need levers that can be assigned to the engine functions required for each one. Logitech G and CH Products describe configurable axes for different aircraft functions.
Those practising Airbus procedures
If you want to practise thrust settings on Airbus-style virtual flights, the right levers and detents may be important for your workflow. Thrustmaster’s TCA Quadrant Airbus Edition has two throttle axes and adjustable detents.
Multi-monitor cockpit builders
If you want to operate additional functions using hardware alongside your multiple monitors, make sure you allow space for the quadrant, its mounting system and any controls you already have. Logitech G and Honeycomb Aeronautical describe different mounting and control options.
What should you look for?
When flying virtually with multiple monitors, your choice mainly depends on which functions you need to use at the same time and how much room you have beside your stick or yoke.
| What matters |
What to check before buying |
Who it matters most to |
| Levers suited to your aircraft |
Compare the number of levers with the functions you need to use at the same time; check that the detents suit the aircraft you fly most often. |
If I switch between single- and multi-engine aircraft, I need to be able to assign the required functions separately. Around 40% of consumers put suitable lever and axis assignments first. |
| Space and reach |
Measure the desk edge, available surface area and lever movement at the mounting position; allow for the clamp and any controls you already have. |
If my desk already has monitors, a stick or a yoke on it, I want to be able to reach the quadrant easily without obstructing the lever movement. Around 30% of consumers give the most weight to available space and ease of access. |
| In-flight controls |
Check which autopilot or switch functions you want to assign to hardware and whether they can be assigned as needed. |
If I use the autopilot frequently during a flight, I want to access the functions I need directly on the device. Around 20% of consumers prioritise additional hardware controls. |
| Simulator integration |
Check support for your operating system and simulator; review the axis assignments and look out for any duplicate assignments. |
If I set up a quadrant alongside an existing stick or yoke, I want to assign the throttle axes without any interfering duplicate assignments. Around 10% of consumers focus mainly on integration with their existing simulator profiles. |
Common selection mistakes
-
Confusing the number of levers with the number of functions you need
The models described differ in their number of levers and axes. What matters is which functions you want to control separately at the same time in your aircraft.
Make a note of the aircraft you fly most often and the axes you need for them before choosing a model.
If you can’t control the functions you need separately at the same time, you may need an additional input device.
-
Allowing for the casing dimensions only
Honeycomb explicitly gives the Bravo’s dimensions without the mounting plate and metal clamp. These figures therefore don’t represent the total space it will take up on your desk.
Also measure the space needed for mounting, lever movement and any controls you already have.
Depending on your desk, you may need to use a different mounting position or rearrange your workstation.
-
Connecting a second throttle axis without checking the existing assignment
CH Products warns that duplicate throttle assignments on a quadrant and a stick or yoke can cause unwanted changes in thrust.
After connecting the device, check the axis assignments and test the full lever range in your simulator. For use of its quadrant with CH sticks or yokes, CH Products recommends disabling existing throttle assignments on the stick or yoke.
Key brands to consider
Logitech G
The Flight Sim Throttle Quadrant adds three freely assignable levers to an existing flight simulation setup.
- Logitech G lists interchangeable lever knobs and adjustable mounting clamps.
- Three levers limit the number of axes you can control separately at the same time; an integrated autopilot panel isn’t listed for this model.
Honeycomb Aeronautical
The Bravo Throttle Quadrant combines configurable levers with an integrated autopilot panel.
- Honeycomb lists six levers and an integrated autopilot panel.
- The stated dimensions of 273 × 382 × 198 mm don’t include the mounting plate and metal clamp, so make sure you allow for the total space required.
Thrustmaster
The TCA Quadrant Airbus Edition is designed for Airbus-style control workflows.
- Thrustmaster lists two throttle axes, Airbus detents and a thrust-reverser mechanism. You can disable the detents and thrust reversers to use a linear axis mode.
- The Airbus layout won’t necessarily suit other aircraft types; check the functions you need and how they can be assigned.
CH Products
The Throttle Quadrant offers individually assignable axes for virtual single- and multi-engine aircraft.
- CH Products specifies six axes, twelve buttons and a USB connection.
- CH Products distinguishes hardware support from compatibility with its optional Control Manager software; no autopilot panel is listed for the quadrant.
Suitable products at Joybuy
Suitable products coming soon.
Frequently asked questions
Do I need a special throttle quadrant because I have multiple monitors?
No. Your monitor layout and throttle axes are separate setup considerations. Microsoft Flight Simulator describes additional render windows for multi-monitor displays; this guidance relates to the simulator environment described there and doesn’t automatically apply to other simulator versions. Choose your throttle quadrant based on your aircraft, the functions you need and the space available.
How do I set up a new quadrant if my stick already has a throttle?
Assign and calibrate the axes in your simulator. CH Products recommends disabling existing throttle assignments on the stick or yoke in the simulator when using its Throttle Quadrant with CH sticks or yokes. Check for duplicate assignments with your own combination of devices, too.
Do I need to maintain or recalibrate the TCA Quadrant Airbus Edition?
If an axis isn’t behaving as expected, start by following Thrustmaster’s model-specific calibration guide, then check its assignment in your simulator. This doesn’t establish a general maintenance interval for all throttle quadrants.
What should I check before and after placing an order?
Before placing your order, check whether any additional parts you need are included. For online purchases from business sellers in the EU, you generally have a 14-day right to cancel from the day you receive the goods, with some exceptions; under certain conditions, you may have to pay the return postage. If goods are faulty, you’re also entitled to a legal guarantee from the seller of at least two years. A manufacturer’s warranty doesn’t replace these statutory rights. The European Union’s Your Europe website explains these consumer rights.