Planners with two monitors
You want to sketch on one of your existing screens and view references or tools on the other. Huion Support explains how to select a monitor as the working area when using a pen tablet without a display.
If you want to draw on one of your existing screens and use the other for references, a pen tablet without a display suits this setup, provided you can select the drawing monitor in the driver. If you’d rather draw directly on the floor plan as it appears on screen, a connected pen display could be a good fit. First check that you have enough space, the right video output and power supply, and that your drawing or CAD software has the features you need.
You want to sketch on one of your existing screens and view references or tools on the other. Huion Support explains how to select a monitor as the working area when using a pen tablet without a display.
You want to guide the pen right where the floor plan appears, and have room for an additional display and its connections. In this case, a connected pen display could be a good fit.
You switch between freehand sketching and precise edits in your drawing software. Autodesk explains how the pen can be used as a pointer with compatible digitising tablets. Check separately that your software and device support the features you need.
| Buying priority | What to check | Who it matters most to |
|---|---|---|
| Assigning the pen to the right screen | Check for a driver option to select a monitor and set the screen mode. Check the assignment again if you change your monitor arrangement. | If you want to draw on one screen while keeping references open on the other, getting the assignment right is essential. Around 33% of consumers put this first. |
| Drawing directly on the floor plan | Check whether the device has its own display, as well as its visible area and resolution. | If you want to guide the pen tip directly over the plan on screen, a display built into the device is important. Around 27% of consumers prioritise this direct-drawing experience. |
| Using the pen in planning software | Check that the pen works as a pointer and that the software supports the selection or editing features you need. | If you switch between sketching and precise CAD work, check your software’s input features beforehand. Around 20% of consumers prioritise these software features. |
| Connections, power and space | Check the available video output, USB-C capabilities, whether an additional power supply may be needed, and the device’s dimensions. | If two screens are already connected to your computer or space is limited, the connections and footprint could be decisive. Around 20% of consumers pay particular attention to these factors. |
A pen tablet without a display uses one of your existing monitors to show your work. A pen display is a screen in its own right and may need an additional video output.
Think about which screens are already connected and whether you want to add another. Check for a free video output before choosing a display.
A pen display may need an additional power supply and take up permanent space on your desk.
For the USB-C connection on the Kamvas 16 (Gen 3), Huion’s manual requires a port that supports video output. Depending on your setup, additional power may also be needed.
Check that your computer’s specific port supports video output and what’s included with the model you’re considering.
On the Wacom Intuos Pro Medium PTK670K0B, the active area is smaller than the device itself. So the drawing area alone won’t tell you how much desk space you’ll need.
Allow for the device’s overall dimensions and room to move your drawing hand, separately from the active area.
If you buy as a consumer from a business, your statutory rights if goods are faulty are separate from any voluntary manufacturer’s warranty. The European Union’s Your Europe website explains these rights and when they apply.
Before buying, check who you’re entering into a contract with and the terms of any voluntary warranty.
The Intuos Pro Medium PTK670K0B is a pen tablet without a built-in display, designed for working with existing monitors.
The Kamvas 16 (Gen 3) is a connected pen display. Huion Support also explains how to select a monitor when using a pen tablet without a display.
The Artist Pro 16 (Gen 2) is a pen display option for drawing directly on a connected screen.
The Pen Tablet Medium Bundle v2 is a display-free option if you value extra controls and the included pens.
Yes. Huion Support explains how to select the target screen under “Working Area” when using a pen tablet without a display and at least two monitors. Check the menu for your specific model and, with an extended desktop, select the screen showing your floor plan.
Not necessarily. According to Huion’s manual, the port must support video output, and you may need additional power depending on your setup. Check your computer’s ports. Huion also describes a 3-in-1 cable connection for this model.
No, not automatically. Autodesk explains that the pen can be used as a pointer with compatible digitising tablets, but this requires configuration and, for some tasks, calibration. Check that the features work with your version of AutoCAD and your specific device.
If you want to draw on an existing monitor and use the other for references, a pen tablet without a display, with the right monitor assignment, suits this setup. If you want to draw directly on the plan as it appears on screen, a pen display could be a good fit. First check video output, space and whether additional power is needed.