Mixing folk demos in a small room
If you mostly mix existing tracks at your desk, make sure the headphone and stereo outputs suit your monitoring setup. Genelec points out that walls, floors, ceilings and furniture all affect how speakers sound.
When mixing folk tracks that have already been recorded, an interface with headphone and stereo outputs to suit your monitoring setup is often all you need; extra microphone inputs won’t automatically improve your existing mix. If you want to record vocals and guitar together, or use separate monitoring paths, choose the inputs and independently usable outputs you need for the job. Genelec points out that the room also affects how speakers sound – an interface alone won’t solve this problem.
If you mostly mix existing tracks at your desk, make sure the headphone and stereo outputs suit your monitoring setup. Genelec points out that walls, floors, ceilings and furniture all affect how speakers sound.
If you occasionally re-record vocals and guitar, check which sources you need to connect and record separately at the same time. Focusrite and Yamaha list direct monitoring for their respective models; also check that the inputs suit your microphone or guitar pickup.
If you want to route speaker outputs separately or use external routing, check how many independently usable line outputs there are. Audient lists four line outputs on the iD14 MKII.
A good fit if: you mix existing tracks and connect no more than one pair of speakers.
The trade-off: Extra microphone inputs aren’t useful in themselves for an existing mix; speaker playback is also affected by the room.
A good fit if: you want to record vocals and a miked-up acoustic guitar on separate tracks at the same time, for example.
The trade-off: Two microphone preamps are different from one microphone input plus one instrument input; direct monitoring doesn’t necessarily let you monitor with DAW effects.
A good fit if: you genuinely plan to use two separate stereo monitoring paths or external routing.
The trade-off: Audient lists four line outputs on the iD14 MKII; its optical ADAT input isn’t an extra built-in microphone preamp.
For shoppers choosing an interface to mix a folk demo in a student bedroom and possibly record new takes, each row focuses on the main priority.
| Buying priority | What to look for | Who is it particularly important to? |
|---|---|---|
| Monitoring in your room | Check for a headphone socket, stereo outputs that suit your speakers and easy-to-reach level controls. Genelec points out that the room affects speaker playback. | If I switch between headphones and one pair of speakers at my desk, I want the right connections and easy-to-use level controls; around 36% of shoppers put monitoring first. |
| Recording overdubs at the same time | Decide whether you’ll record the guitar via a pickup or its own microphone, then count how many microphone inputs you’ll need to use simultaneously. | If I want to record vocals and a miked-up acoustic guitar separately at the same time, I need suitable microphone inputs; around 29% of shoppers prioritise recording new takes. |
| Computer and power supply | Check the operating system, drivers, USB connection and power requirements of the specific model against your computer. Audient specifies a minimum of 0.9 A at 5 V and a USB 3.0 port for the iD4 MKII. | If I’m using the interface with my laptop, I want to be sure the connection and power supply are suitable for the model; around 21% of shoppers prioritise computer connectivity. |
| Separate monitoring paths | Distinguish independently usable line outputs from headphone sockets and optical inputs; check the routing for the specific model. Audient lists four line outputs on the iD14 MKII. | If I want to route two separate stereo monitoring paths later, the actual routing matters more to me than the number of sockets alone; around 14% of shoppers prioritise extra outputs. |
When you’re mixing tracks that have already been recorded, the number of inputs doesn’t determine how many tracks you can mix in your project.
Only count sources you plan to record simultaneously in future, and choose outputs that suit your actual monitoring setup.
PreSonus lists one mic/line combo input on the AudioBox GO; Audient lists one microphone preamp alongside an instrument input on the iD4 MKII. To record two miked-up sources at the same time, you need a suitable input configuration.
Before you buy, decide whether you’ll record the guitar via a pickup or with its own microphone, then count how many microphone inputs you’ll need to use simultaneously.
If you later need to use two microphones at once, you may need extra hardware or to replace your interface.
Audient specifies a minimum power requirement and a USB 3.0 port for the iD4 MKII.
Check the power and port requirements of the model you want against the connections on your laptop.
MOTU says the M2’s RCA outputs mirror its TRS outputs. So extra sockets don’t automatically mean you can route another mix independently.
Check how many line outputs can be routed independently, and how the specific model handles routing.
The Scarlett 2i2 4th Gen is an option with two inputs and compact stereo monitoring.
The iD4 MKII combines a microphone input and an instrument input; the iD14 MKII is worth considering if you need extra microphone preamps or line outputs.
The UR22MK3 is a two-input option with two combo inputs for recording new takes.
The Studio 24c has two mic/instrument/line inputs; the AudioBox GO is designed for a smaller setup with a microphone input and a separate instrument input.
The M2 offers two mic/line/instrument inputs, MIDI and input and output metering.
Not to mix the existing tracks. Count microphone inputs for any new recordings you’re planning, and first check that the outputs suit your monitoring setup.
Compare the connections on the specific interface with the inputs on your speakers, and choose suitable cables. Start at a low level when switching your monitoring setup; whether outputs can be routed independently depends on the model.
No. Genelec points out that reflections from walls, floors, ceilings and furniture change the sound of speakers. So consider speaker placement and the room too, rather than basing your choice on converter specifications alone.
Consumers generally have a 14-day right to cancel distance contracts, although statutory exceptions and the start of the cancellation period should be taken into account. The German Federal Ministry of Justice explains the right to cancel in sections 312g and 355 of the German Civil Code (BGB). German consumer advice centres distinguish statutory rights against the seller from a voluntary guarantee.
As part of its market surveillance, Germany’s Federal Network Agency lists CE marking, product identification, manufacturer details, German-language instructions and the declaration of conformity among the points to check. Check these details for the specific product on offer.