When there’s glass in front of a print, the first thing to consider is whether you can position the light so it doesn’t create distracting reflections in the camera’s view. Softer light alone won’t prevent reflections, as the Ralfonso online photography school also explains. If you already have a light that’s been confirmed as suitable, a single light modifier may be enough. If not, a kit could be an option, provided its components and the space required for the stands suit your setup.
Which setup is right for you?
Photographers working with glazed frames
If you want to show the print straight on without lights or the surroundings reflecting in the glass, the position of the light source is an important factor when choosing your setup. The Ralfonso online photography school describes reflections as a key challenge when photographing through glass.
Photographers capturing full prints
If you’re photographing the whole print, check the brightness in the centre and corners, then adjust the position of the lights accordingly. A second light can give you more options for adjusting the setup, provided there’s room beside the table.
Photographers using a shared table
If the table is used for other things too, you’ll need space beside the frame for the softbox, light and stand, and somewhere to put them away afterwards. The setups described by NEEWER and SmallRig differ in their components and in the requirements for the light you use.
What should you look for when buying?
Single rectangular softbox
Suitable if: You already have a light with a confirmed compatible fitting and want to position the light source to one side.
Consider: A single light modifier doesn’t include the light itself or a stand, which you may also need. The opposite side of the print may look darker.
Kit with two continuous lights
Suitable if: You don’t have compatible lights and stands, and have room for both lights beside the table.
Consider: Two stands take up floor space. Also check the specifications for the exact electrical version of the kit on offer.
Compact light modifier
Suitable if: Space at the table is particularly limited and you have a light that’s explicitly listed as compatible.
Consider: From the same position, a smaller light source may cover less of the frame. Check the lighting and reflections with your own subject.
| Buying consideration |
What to check before buying |
Who is it most important for? |
| Reflections on glass |
Check whether you can move the light source to one side; test the setup with the frame in view through the camera. |
If I’m photographing a print through glass, I want to keep distracting reflections out of the picture. Around 33% of consumers say controlling reflections is their top priority. |
| Even lighting |
Compare the centre and corners in a test photo; if you’re buying a kit, check that you can set up lights in two positions. |
If I want to show the whole print, I don’t want to have to judge just the centre of the image. Around 27% of consumers prioritise lighting that’s as even as possible. |
| Space and storage |
Allow for the softbox, stand legs, light head and cable route at the actual location. |
If I use the table for other things too, I need to be able to set up the lights there and put them away afterwards. For around 20% of consumers, space is the top consideration. |
| What’s included and compatibility |
Check the model, fitting and whether a light and stand are included; for an electrical kit, check the specifications for the exact version. |
If I don’t want to have to track down missing parts, I need to know what’s included in the kit and whether a single light modifier will fit my light. Around 20% of consumers put the included equipment and compatibility first. |
Common misconceptions
-
Soft light prevents reflections in glass
Even a diffused light source can reflect in the frame glass and obscure parts of the print.
View a framed subject through your camera and adjust the position of the light and camera before choosing a setup.
Repeatedly repositioning the light and camera can take extra time during setup.
-
A single softbox is a complete lighting setup
A light modifier sold separately doesn’t necessarily come with a light or stand. To use it, its fitting must be compatible with your existing light.
Check what’s included in the specific offer against the equipment you already have.
You may need to buy any compatible components that are missing.
-
Measuring only the tabletop
A kit with two stands also needs space at the sides, and you’ll need to allow for the stand legs and cables in your planned setup.
Sketch out the whole lighting setup, including the stand legs and cables, before deciding how much space you need.
You may need to allow extra storage space for the stands and softboxes.
-
Assuming conflicting lamp details confirm the kit specifications
The NEEWER product page for the NK200 lists both E27 and E26 fittings in different places, as well as different lumen values. These details don’t confirm a single, consistent electrical specification.
Before buying, ask for confirmation of the fitting, bulb and documentation for the exact version on offer.
Brands to consider
NEEWER
Consider both the NK200 continuous lighting kit and the separately sold NS93P rectangular light modifier.
- NEEWER lists softboxes, bulbs and stands as part of the NK200 kit. The NS93P is listed as measuring 60 × 90 cm and includes diffusers and a grid.
- There are conflicting details for the NK200 fitting and light output. Check the exact electrical version before buying.
Godox
The rectangular SB-FW range could suit setups that already have compatible equipment and need a single light modifier.
- Godox lists a grid, a Bowens fitting and a 60 × 60 cm surface for the SB-FW6060.
- This model isn’t listed as including a light or stand. The SB-FW6060 specifications don’t describe the performance of every Godox light.
Rollei
The rectangular Quick-Fold softbox is an option if you’re looking for a foldable Bowens light modifier with a grid.
- For the 70 × 100 cm version with manufacturer SKU 28916, Rollei lists a Bowens fitting and a grid.
- The specifications for this version can’t automatically be applied to a different size. You’ll need space to set it up.
SmallRig
The RA-D60 mini is a more compact light modifier for lights that are explicitly listed as compatible.
- SmallRig lists diffusers, a grid and a quick-release mechanism. The product manual describes the accessory for RC-60 and RC-100 lights.
- This doesn’t mean it’s universally Bowens-compatible or confirm that a bulb is included.
Joybuy products
Related products coming soon.
Frequently asked questions
Does a softbox remove reflections from frame glass?
No. Softer light alone won’t prevent reflections. Check for reflections in the camera’s view and adjust the position of the light source first. Nikon says a polarising filter can reduce reflections from glass, but it doesn’t replace checking your specific setup.
Do I need any other equipment for a softbox sold separately?
Yes, if you don’t already have a compatible light or a stand you need. The light modifier must fit your light, so check the fitting and what’s included with the specific model before choosing a single light modifier.
Is a kit with two lights a good choice for a small table?
It could work if you have room for both light positions and want to adjust the lighting across the whole print. Allow space for two stands, including their legs and cables. If you don’t have room, a single light modifier on a compatible light you already own may be more practical.
What are my return and fault rights when buying online in Germany?
The Verbraucherzentrale says that online orders in Germany generally come with a 14-day cancellation period from the date you receive the goods. Your rights if an item is faulty are separate; a guarantee is voluntary and doesn’t replace them.
How can I protect delicate original prints while photographing them?
Keep the lights on only for as long as necessary and avoid unnecessary heat. The Library of Congress describes light damage to works of art on paper as cumulative; its guidance doesn’t set a general exposure limit for every privately owned print.