Which monitor setup is right for you?

Drivers with a compact rig

Measure the width and depth of your cockpit, as well as the space available for a stand or mount, before choosing a screen size. iRacing Support recommends measuring the distance between your eyes and the screen in your normal driving position.

Drivers who prioritise peripheral vision

If seeing the areas around your cockpit matters to you, consider a wide single monitor or a triple-screen setup. With three screens, you’ll also need room to position and mount them.

Drivers with limited PC capability

Match the resolution and refresh rate to your racing game, graphics outputs and the monitor port you’ll actually use. The refresh rate supported by a model can depend on the input.

What to consider when buying

iRacing Support recommends measuring your eye-to-screen distance in your normal driving position. For a three-monitor AMD Eyefinity setup, iRacing specifies matching resolutions as a requirement.

Consideration What to check before buying Who it matters most to
Space in the cockpit Width and depth with the stand or VESA mount; the mount’s load capacity. If space in my cockpit is tight, the monitor needs to fit with its stand or mount. Around 36% of consumers are likely to put fit first.
Peripheral vision for oval racing Support from the racing game you use and its field-of-view settings; for three monitors, also check the angle and resolution. For oval racing, I want to take the in-game view to the sides into account. Around 29% of consumers are likely to put peripheral vision first.
Frame rate with your existing PC Resolution and refresh rate on the input you plan to use; the gaming performance your system can achieve. I want to choose a resolution and frame rate that suit my PC and the port I’m using. Around 21% of consumers are likely to prioritise this combination.
Setup and servicing requirements Number of displays and mounts needed; check the specific product’s warranty terms separately from your statutory rights for faulty goods. I want to understand in advance the overall effort involved in adding displays and mounts. Around 14% of consumers are likely to have this concern.

Common mistakes when buying a monitor

  • Comparing only the screen size with the width of your rig

    The diagonal measurement doesn’t show how much space the casing and stand actually need. So, even if the screen size seems right, a 34-inch model could still be too wide or too deep for the space you have.

    Compare the dimensions of the specific model with the space available. If you’re using a VESA mount, check that it’s compatible with the mount.

  • Planning for three displays as if they were a single monitor

    A triple-screen setup needs space, mounts, suitable ports and its own configuration. For AMD Eyefinity, iRacing specifies matching resolutions as a requirement. It recommends using monitors from the same brand or range, but says this isn’t essential.

    Before committing, check the complete setup, including the number of monitors, outputs, mounts and in-game settings.

  • Assuming advertised milliseconds or hertz will improve your training

    Samsung describes the 1 ms figure for the 27-inch Odyssey G5 as an MPRT value measured under its own test conditions. For the BenQ EX3410R, the manufacturer lists different maximum refresh rates for DisplayPort and HDMI.

    Check how the figure is measured and which input it applies to. Also consider separately what frame rate your PC can achieve in your racing game at the resolution you’ve chosen.

Brands and models worth considering

BenQ

The MOBIUZ EX3410R is a 34-inch, 21:9 option for a single ultrawide display, provided it fits your available space and rig mount.

  • BenQ lists a resolution of 3440 × 1440 pixels, 1000R curvature, a 100 × 100 mm VESA mount and a width of 795.7 mm.
  • The specified 144 Hz applies over DisplayPort; BenQ lists 120 Hz over HDMI. These manufacturer specifications don’t prove a training benefit.

Samsung

The Odyssey G5 models considered here are available in 27-inch QHD and 34-inch UWQHD versions.

  • For the 27-inch LS27CG554EUXEN monitor, Samsung lists QHD and 165 Hz; for the 34-inch LC34G55TWWPXEN, it lists 3440 × 1440 pixels and 165 Hz.
  • The advertised 1 ms figure is MPRT. It doesn’t prove equally low input lag or an effect on training.

LG

The UltraGear 34G630A-B is a 34-inch ultrawide option with a resolution of 3440 × 1440 pixels.

  • LG lists a 240 Hz refresh rate and, with the stand attached, dimensions of 808 mm wide and 235 mm deep.
  • LG Germany marks the model as “No longer available”; this doesn’t tell you whether it’s available from other retailers.

Dell Alienware

The AW3426DW is a 34-inch QD-OLED option for buyers considering this display technology.

  • Dell lists a resolution of 3440 × 1440 pixels and a refresh rate of 280 Hz for this model.
  • These specifications don’t determine whether the model will fit in a compact rig. Check the dimensions, ports and warranty terms for the specific offer separately.

Suitable products on Joybuy

Suitable products will be available soon.

Frequently asked questions about monitors for oval racing

How do I set the viewing angle after installation?

If you use iRacing, measure the distance between your eyes and the screen, as well as the screen width, while sitting in your normal driving position. Enter the measurements in the monitor settings and select the appropriate single-screen or triple-screen configuration. If you’re using three monitors, enter their angles too.

Do three monitors have to be from the same manufacturer?

No. The iRacing guide to AMD Eyefinity recommends using monitors from the same brand or range, but doesn’t require it. For this setup, iRacing does require matching resolutions. Also check that your PC and mount are suitable for the specific configuration.

What are my rights when buying online in Germany if I change my mind or receive faulty goods?

The German consumer advice centre says that online purchases generally come with a 14-day right to cancel, starting from the day you receive the goods. Your statutory rights for faulty goods are against the seller and are separate from any voluntary manufacturer’s warranty. The rules that apply in a particular case depend, among other things, on the specific circumstances of the purchase.

What should I do with an old gaming monitor?

A monitor that’s reached the end of its life should be treated as waste electrical equipment and taken to an authorised collection point. The Federal Environment Ministry lists local collection points, manufacturers and retailers among the options. Whether a particular retailer is required to take it back depends on the relevant legal requirements.