Who are the different options suitable for?

Gamers on a different floor

If the Wi-Fi signal is weak where you download games, first check reception and the connection between floors. Bitkom and VATM point out that the router’s location affects Wi-Fi reception.

Households with an existing router

If you want to keep a working router, make sure any additional devices can be integrated properly. FRITZ! and MERCUSYS describe different options and requirements for mesh and access point operation.

Households with a LAN connection between floors

An existing network cable can provide a wired connection between access points. TP-Link Deutschland and ASUS Deutschland describe Ethernet backhaul for compatible systems and devices.

What should you look for when buying?

If a game update is slow across multiple floors, first identify the actual bottleneck. Then compare coverage, backhaul, connectivity and installation requirements.

Priority What to check when buying Who will find this particularly important?
Coverage across floors Where a node could be placed and whether it will still have a reliable connection to the rest of the network. If an update is downloading on a distant floor, I want a Wi-Fi signal there, not just an impressive router specification. Around 33% of consumers prioritise coverage where they download.
Backhaul Whether there’s a LAN connection between floors and whether the specific system supports Ethernet backhaul. If there’s a network cable between floors, I want to use it to connect the nodes. Around 27% of consumers particularly value the connection between floors.
Connectivity and compatibility Whether the device is compatible with DSL, cable or fibre, and supports the router or access point mode you need. I want to keep using my existing connection and devices, provided they’re compatible with the new system. Around 20% of consumers prioritise compatibility with their connection and devices.
Upgrade effort Which nodes, cables and existing devices can actually be used in your planned set-up. If only one floor has poor coverage, I don’t want to replace the whole router unnecessarily. Around 20% of consumers weigh up the cost and effort of buying and installing new equipment.

Avoiding common buying mistakes

  • Assuming the advertised Wi-Fi speed is the download speed on another floor

    According to Bitkom and VATM, everyone in the household shares the speed included in the broadband package. The router’s location and the connection between nodes also affect the speed that reaches your gaming device.

    Check your broadband connection and the connection at your gaming device separately. Treat backhaul and Wi-Fi coverage as potential bottlenecks in their own right.

  • Placing a wireless node where the router’s signal is already very weak

    A wirelessly connected node needs a sufficiently strong connection to the rest of the network itself, so it can pass the signal on.

    Check the node’s location and connection. If you have a suitable cable, Ethernet backhaul may be an alternative.

    Depending on your home’s layout, you may need another suitable location, an additional node or a LAN cable. Factor in the installation work before you buy.

  • Assuming similarly named mesh products or Wi-Fi 7 devices work in the same way

    MERCUSYS explains that Halo and EasyMesh do not form a shared mesh network. For the Deco BE25, TP-Link Deutschland lists the 2.4 and 5 GHz frequency bands, so Wi-Fi 7 on this model does not automatically mean it has a 6 GHz band.

    Compare the exact product range, supported Wi-Fi bands and intended operating mode, rather than relying on a Wi-Fi standard or mesh logo alone.

Key brands to consider

FRITZ!

FRITZ! offers routers, as well as compatible repeaters and mesh sets for extending an existing network.

  • According to the FRITZ! Provider Portal, a mesh set can also be connected by LAN behind another router.
  • A wireless repeater needs a suitable connection where it’s placed. According to FRITZ!, the FRITZ!Box 7690 has a DSL modem but no 6 GHz Wi-Fi.

TP-Link

Deco mesh systems are designed to use multiple access points. The specific features depend on the model and how it’s set up.

  • TP-Link Deutschland describes Ethernet backhaul for compatible Deco units. The BE25 is available as a dual-band Wi-Fi 7 system with 2.5 Gbit/s ports.
  • The German product page for the Deco BE25 lists 2.4 and 5 GHz bands. Advertised Wi-Fi speeds don’t measure download speeds across multiple floors.

ASUS

AiMesh-compatible routers and nodes are suited to households that want to configure their router and backhaul carefully.

  • According to ASUS, Ethernet backhaul mode can free up Wi-Fi capacity for devices, provided you use compatible AiMesh devices and firmware and connect the nodes by cable.
  • ASUS warns that nodes that aren’t connected by cable may lose their uplink connection when using Ethernet-only mode.

devolo

devolo offers Wi-Fi 7 Mesh BE6500 sets with multiple units. According to the manufacturer, they can also be used as access points behind an existing router.

  • The manufacturer’s website lists two- and three-unit sets, as well as expansion options.
  • Advertised combined Wi-Fi speeds don’t show the download speed at your gaming device. Make sure the number of units and cabling suit your home.

MERCUSYS

MERCUSYS offers Halo mesh systems and separate EasyMesh products as different ways to extend your network.

  • For the Halo models listed in its guide, MERCUSYS describes access point operation with Ethernet backhaul.
  • According to MERCUSYS, Halo and EasyMesh do not form a shared mesh network. Some advanced router features aren’t available in access point mode.

Joybuy products for Wi-Fi across multiple floors

This selection includes mesh systems and access points for extending Wi-Fi across multiple floors, including options for use with an existing network cable.

TP-Link Deco BE22 (2-Pack) Whole Home Mesh Wi-Fi 7 System

TP-Link Deco BE22 (2-Pack) Mesh Wi-Fi 7 System

A two-unit mesh set for extending Wi-Fi across several living areas.

Dual-band; Gigabit Ethernet. Before buying, check that the operating mode you need is compatible with your existing router.

View at Joybuy
Ubiquiti UniFi U6 Mesh WiFi 6 Access Point

Ubiquiti UniFi U6 Mesh WiFi 6 Access Point

For setting up an access point on the floor where you need it, provided a LAN uplink is available there.

Indoor/outdoor model with 6 spatial streams; a PoE adapter is included according to the product name.

View at Joybuy
TP-Link Deco M4 AC1200 Mesh WiFi System (3-Pack)

TP-Link Deco M4 AC1200 (3-Pack)

Three mesh units for distributing Wi-Fi across several living areas.

Dual-band system with Gigabit ports. Check which operating mode is designed to work with your existing router.

View at Joybuy
TP-Link Deco S4 AC1200 Mesh WiFi System (3-Pack)

TP-Link Deco S4 AC1200 (3-Pack)

Three mesh units for extending Wi-Fi across several living areas.

Dual-band system with Gigabit Ethernet ports for connecting compatible devices.

View at Joybuy
MERCUSYS Halo H25BE Mesh Wi-Fi Set (2-Pack)

MERCUSYS Halo H25BE (2-Pack)

A two-unit mesh set with Gigabit ports for distributing Wi-Fi around your home.

Wi-Fi 7 BE3600, dual-band and three Gigabit ports per unit. For a wireless connection, the second unit must be within range of the first, according to the product description.

View at Joybuy

Frequently asked questions

How can I tell whether my broadband connection or Wi-Fi is slowing down my download?

Where possible, compare your broadband speed using a wired connection with the connection at your gaming device. The Bundesnetzagentur offers a desktop application that lets you compare your actual broadband speed with the speed agreed in your contract. It doesn’t measure Wi-Fi coverage on every floor.

Where should I place a wirelessly connected mesh node?

Don’t place it somewhere with almost no connection to the rest of the network. The node needs a sufficiently strong signal itself. If you have a LAN cable, check whether your specific system supports Ethernet backhaul instead.

Do I need to replace my current router to use a mesh system?

Not necessarily: a system with a suitable access point mode can work behind an existing router. Check which features are available in that mode for the specific model, and how the main node needs to be connected.

Can a LAN cable between floors help?

Yes, as long as the system you choose supports Ethernet backhaul and the cable is usable. It lets you create a wired backhaul connection between compatible access points. Your broadband connection and other devices will still affect the download speed you can achieve.

Are Halo and EasyMesh compatible with each other?

MERCUSYS explains that Halo and EasyMesh do not form a shared mesh network. So, before combining devices from different systems, check the specific product range and its intended operating mode.