Which connection is right for you?

Gamers with Wi-Fi dead spots

If you’re downloading updates in a room behind thick walls, first check whether a repeater can still receive a usable signal from the router at a suitable location. FRITZ! points out that both the connection between the repeater and router and the connection to your device matter.

Gamers who can run a cable

If you can run an Ethernet cable to your console or to an access point, you can bypass the tricky wireless connection through the walls. Check whether the specific device offers LAN or access point mode.

Gamers who can’t run a cable

If neither a suitable position for a repeater nor a practical cable route is an option, you could try Powerline using your home’s electrical wiring. devolo notes that performance can vary depending on the socket.

What to consider when choosing

Wi-Fi repeater

A good fit if: You can find a spot between the router and your gaming device with good router reception, and you don’t want to run an Ethernet cable.

Keep in mind: A LAN port on the repeater lets you connect your console by cable, but it won’t fix a weak wireless connection between the repeater and router.

Ethernet or a wired access point

A good fit if: You can run an Ethernet cable from the router to your gaming device or to an access point.

Keep in mind: The cable route needs to be practical; check whether the device supports access point or LAN bridge mode.

Powerline

A good fit if: There’s no suitable spot for a repeater and no practical route for an Ethernet cable.

Keep in mind: Performance depends on the sockets and your home’s electrical wiring; interference can occur with certain VDSL connections.

What you need What to check before buying Who is this most important to?
Signal at the repeater location Check for accessible sockets between the router and the room you want to reach, as well as a signal strength indicator if available. The repeater itself needs a usable connection to the router. If you game in a room behind thick walls, you’ll want to find a spot that can reach both the router and your gaming device. Around 40% of consumers prioritise signal strength where the repeater is placed.
Ethernet route and connection type Check for a LAN port and whether the device offers access point or LAN bridge mode. Advertised Wi-Fi headline speeds aren’t the same as the download speeds you’ll actually get. If you can run a cable to your console or into the room you want to reach, you can bypass the wireless connection through the walls. Around 30% of consumers prioritise a wired route for downloads.
Connection without an Ethernet cable Check whether the Powerline kit offers the LAN or Wi-Fi connection you need, and test the sockets you plan to use. Interference can occur with certain VDSL connections. If you don’t have a good spot for a repeater or a practical cable route, a connection through your home’s electrical wiring could work. Around 30% of consumers are mainly looking for a solution without a wireless link back to the router or an Ethernet cable.

Avoiding common misconceptions

  • Confusing maximum Wi-Fi speed with download speed

    Technical Wi-Fi specifications describe gross data rates. The data rate actually available for file downloads is lower.

    Once everything is set up, compare download speeds where you plan to game rather than choosing a model based solely on its AX or Gbit/s specifications.

  • Putting the repeater directly in the Wi-Fi dead spot

    The connection between the router and repeater also needs a good signal. Connecting your console to the repeater by Ethernet won’t help if the repeater’s connection to the router is still weak.

    Before buying, check for possible locations with good router reception. If there’s nowhere suitable, consider running a cable or using Powerline.

    You may need to try more than one location to get a usable signal.

  • Assuming Powerline works independently of your home’s wiring

    Transfer speeds can be low at some sockets. Certain VDSL setups can also experience interference between the electrical and telephone wiring.

    Test the sockets you plan to use. If you have problems with a VDSL connection, check the manufacturer’s guidance for the connection types affected.

Key brands at a glance

FRITZ!

Depending on the model, the FRITZ! repeaters listed offer Wi-Fi 5 or Wi-Fi 6, plus one or more Gigabit LAN ports. The model specifications mentioned don’t prove how well a device will receive a signal through thick walls.

  • FRITZ! Mesh features are relevant if you have a compatible FRITZ! home network.
  • Even a tri-band model needs a usable wireless connection or a LAN connection.

TP-Link

The RE605X and RE655 models are described as having Gigabit LAN and access point mode; the RE605X supports Wi-Fi 6, while the RE655 supports Wi-Fi 5.

  • TP-Link lists placement aids for both models.
  • OneMesh on the RE605X requires a compatible OneMesh router. According to TP-Link, actual Wi-Fi coverage can vary depending on building materials and wireless interference.

devolo

The range includes wireless repeaters and Magic Powerline products, which transmit data over existing electrical wiring.

  • Powerline could be an alternative connection method if a usable wireless connection isn’t possible.
  • devolo notes that transfer speeds can be low at some sockets and that interference may occur with certain VDSL connections.

Telekom

Speed Home WLAN is designed to extend the mesh network of compatible Speedport routers.

  • According to Telekom, mesh is supported by models including the Speedport Smart 3 and Smart 4 with up-to-date firmware.
  • The Speedport Smart and Smart 2 don’t act as mesh bases themselves. Check the exact router model and firmware before buying.

NETGEAR

The EAX15 is described as a Wi-Fi 6 mesh repeater in a plug-in design, with a Gigabit Ethernet port.

  • The Ethernet port lets you connect a device by cable.
  • An advertised maximum wireless speed doesn’t guarantee a particular download speed through thick walls.

Joybuy products for different connection options

The Joybuy products below cover wired access points, wireless repeaters and Powerline for connecting devices in the room you want to reach.

Ubiquiti UniFi U6+ WiFi 6 Access Point

Ubiquiti UniFi U6+ WiFi 6 Access Point

For a room with an Ethernet cable route where you also need Wi-Fi.

Dual-band Wi-Fi; Gigabit Ethernet; PoE in accordance with 802.3af.

Requires an Ethernet connection and PoE power; set-up is managed through the UniFi Network application.

View at Joybuy
Ubiquiti U7 Mesh Wi-Fi 7 access point with PoE

Ubiquiti U7 Mesh 5000 Mbit/s Power over Ethernet

For a room with an Ethernet cable route where you need a Wi-Fi 7 access point.

Wi-Fi 7; 2.5 Gigabit Ethernet uplink with PoE; mesh use.

The specified uplink requires an Ethernet cable and PoE. Central configuration is managed through UniFi Network.

View at Joybuy
MERCUSYS ME80X Wi-Fi 6 Range Extender

MERCUSYS ME80X Wi-Fi 6 Range Extender

For a wireless repeater location that still gets a signal from the router.

AX3000 dual-band; 574 Mbps at 2.4 GHz and 2402 Mbps at 5 GHz; Gigabit port; access point mode.

In repeater mode, the location still needs to receive a signal from the router. The instructions recommend placing it roughly halfway between the router and the device.

View at Joybuy
MERCUSYS Powerline Adapter MP500 Kit

MERCUSYS Powerline Adapter MP500 Kit

For a wired connection over your home’s electrical wiring when there’s no practical Wi-Fi link back to the router or Ethernet cable route.

HomePlug AV2; up to 1000 Mbps according to the product description; two adapters; Gigabit Ethernet; no Wi-Fi.

The adapters should be plugged directly into wall sockets rather than extension leads. Performance may depend on your home’s electrical wiring.

View at Joybuy
TP-LINK RE235BE BE3600 dual-band Wi-Fi 7 range extender

TP-LINK RE235BE BE3600 Dual-Band Wi-Fi 7 Range Extender

For a wireless repeater location within range of your existing router.

Range extender mode; 2.5 Gigabit Ethernet port; EasyMesh compatibility; MLO.

In repeater mode, the location must be within range of your existing router. Check EasyMesh compatibility with your specific router.

View at Joybuy

Frequently asked questions

How can I tell whether a repeater will help or my internet connection is the bottleneck?

Compare download speeds near the router with those at your gaming device. If the connection is already slow near the router, a repeater won’t increase the broadband speed you pay for. For fixed broadband connections, the Bundesnetzagentur offers a desktop app for measuring speeds.

Where should I put a Wi-Fi repeater?

Choose a spot where the repeater still gets a good signal from the router and can reach your gaming device. The socket next to your console isn’t automatically suitable if the router’s Wi-Fi barely reaches it. Use a signal strength indicator if available, and check the connection once everything is set up.

Is an Ethernet cable from my console to the repeater enough?

It only provides a wired connection between your console and the repeater. If the repeater still has a weak Wi-Fi link back to the router, that section may remain the bottleneck. An Ethernet cable from the router to an access point bypasses the wireless connection through the walls.

Does a mesh repeater need to be compatible with my router?

It depends on the mesh feature in question. TP-Link says OneMesh requires a compatible OneMesh router; with Telekom, mesh support depends in part on the exact Speedport model and up-to-date firmware. So check both specific models rather than relying on general Wi-Fi compatibility alone.

Can I use Powerline without problems with any VDSL connection?

Not necessarily. devolo notes that with VDSL profiles 17a and 35b, Powerline can sometimes cause interference between telephone and electrical wiring. Test the sockets you plan to use and, if you have connection problems, follow the relevant manufacturer guidance.