Who should consider this?

Gamers with a weak signal upstairs

If your Wi-Fi is weak upstairs, the key question is whether the repeater can still get a decent connection to the router from where you place it. Deutsche Telekom recommends positioning the device closer to the router or another Wi-Fi extender if the connection is weak.

Gamers facing long game updates

What matters is the download speed on your gaming device, not just the advertised Wi-Fi data rate. Germany’s Federal Network Agency offers a broadband measurement tool that is independent of provider and technology, so you can check your internet connection separately.

Households with poor coverage on several floors

If you have Wi-Fi dead spots in several places, check whether there are any possible cable routes and whether the router and additional nodes are genuinely compatible with the same mesh system. Deutsche Telekom lists specific Speedport models and firmware requirements for supported mesh combinations.

What should you look for when buying?

The figures represent consumers choosing a Wi-Fi solution for game updates in a three-storey house.

Buying priority What to check before buying Who is most affected?
Connection between floors Check possible intermediate positions and power sockets; once set up, check the connection quality. If I put the repeater on the top floor, it still needs a decent connection to the router there; consumers with this as their main priority make up around 33% of consumers in this buying scenario.
Download speed on the gaming device Check your internet connection and the connection to your gaming device separately; don’t assume advertised wireless data rates are the same as download speeds. For long game updates, what matters to me is the actual download speed on my gaming device, not just the advertised Wi-Fi data rate; consumers who prioritise this make up around 27% of consumers in this buying scenario.
An alternative to a wireless connection Check whether you can run a cable and use access point mode, or test powerline at the sockets you plan to use. If a wireless connection between floors isn’t suitable, I need another way to connect to the more distant area; consumers with this as their main concern make up around 20% of consumers in this buying scenario.
A compatible mesh system Check the router model, firmware and explicitly supported mesh combination. If I want to expand my existing mesh network, the new node needs to be compatible with my router system; consumers who prioritise this compatibility make up around 20% of consumers in this buying scenario.

Avoid common buying mistakes

  • Placing the repeater directly in a Wi-Fi dead zone

    The repeater also needs to maintain a working connection back to the router. A device at the destination cannot reliably extend the connection if it barely gets a signal there itself.

    First, try a suitable intermediate position and check the connection indicator. If there’s nowhere suitable, consider a wired LAN link or another way to connect.

  • Confusing advertised Wi-Fi speeds in Mbps with download speeds

    The wireless data rate doesn’t automatically tell you the download speed on your gaming device. The wireless connection inside your home and your internet connection also affect the download.

    Check your internet connection and the connection to your gaming device separately before choosing a different device because of long updates.

  • Assuming Wi-Fi compatibility means mesh compatibility

    A repeater can extend your Wi-Fi without supporting the mesh features of a router from another range. Manufacturers limit their mesh features to specific routers and, in some cases, particular firmware versions.

    Before buying, check the router model, firmware and explicitly supported mesh combination.

  • Assuming powerline will perform equally well at every socket

    devolo notes that individual power sockets and nearby electrical devices can affect powerline data rates.

    Test powerline at the sockets you actually plan to use and check the connection there.

Key brands at a glance

FRITZ!

A relevant choice if you want to add a FRITZ! repeater to an existing FRITZ! mesh network.

  • FRITZ! lists tri-band Wi-Fi 6 and two Gigabit LAN ports for the 3000 AX.
  • These manufacturer specifications don’t predict download speeds across three floors. Using Wi-Fi alone doesn’t automatically mean full integration with a FRITZ! mesh network.

TP-Link

The RE705X is worth considering if you’re looking for a repeater or access point with a Gigabit Ethernet port.

  • TP-Link lists repeater and access point modes, as well as EasyMesh support with an EasyMesh-compatible router.
  • Advertised Wi-Fi data rates aren’t a measurement of the speed on your gaming device; check your router’s mesh compatibility specifically.

Deutsche Telekom

Speed Home WLAN is relevant for households looking to use a supported combination with a Speedport router.

  • Deutsche Telekom lists compatible Speedport models and the required firmware versions.
  • For routers that don’t support mesh, it instead describes setting up a Speed Home WLAN via LAN as the mesh base.

devolo

Magic 2 WiFi 6 next combines powerline with Wi-Fi. It’s a possible alternative if the wireless connection between floors isn’t suitable and running a network cable isn’t practical.

  • According to devolo, the Starter Kit includes two adapters and the Multiroom Kit includes three.
  • devolo notes that power sockets and nearby electrical devices can affect the connection; test it at the positions you plan to use.

ASUS

The RP-AX58 is worth considering if you’re looking at repeater, access point or media bridge modes.

  • ASUS lists these operating modes in its technical specifications; AiMesh requires a compatible router.
  • Features and availability may vary by market. Before buying, check that the specific version is intended for your market.

Joybuy products for connecting across multiple floors

The products below include standalone wireless repeaters, mesh units and devices for a wired access point connection. Mesh nodes need to be compatible with your existing system. For wired solutions, make sure you have the required LAN connection and, where applicable, power supply.

TP-Link RE190 AC750 wireless repeater

TP-Link RE190 AC750 Wireless Repeater

This standalone wireless repeater is worth considering if there’s still a connection to the router from the intermediate position you choose.

The product specifications list dual-band operation, a signal strength indicator and 433 Mbps.

Shop at Joybuy
TP-Link Deco X10 mesh Wi-Fi, 1-pack

TP-Link Deco X10 Mesh Wi-Fi, 1 Pack

This additional Deco mesh unit is described as an option for expanding an existing Deco mesh network; check that it’s compatible with your system first.

Wi-Fi 6, AX1500, dual band and two Gigabit ports.

Shop at Joybuy
MERCUSYS ME80X Wi-Fi 6 range extender

MERCUSYS ME80X Wi-Fi 6 Range Extender

This model lists repeater and access point modes, as well as a Gigabit LAN port; check whether the right mode suits your connection between floors.

AX3000 dual band; specified speeds are 574 Mbps at 2.4 GHz and 2402 Mbps at 5 GHz. A signal strength indicator is also listed.

Shop at Joybuy
MERCUSYS Halo H25BE mesh Wi-Fi, 2-pack

MERCUSYS Halo H25BE Mesh Wi-Fi, 2-pack

This set is described as a mesh system with router and repeater functionality. Check that it’s compatible with your existing router system and that you can place the units in suitable locations.

Wi-Fi 7 BE3600 dual band; three Gigabit ports per unit.

Shop at Joybuy
Ubiquiti UniFi U7 Lite Wi-Fi 7 access point

Ubiquiti UniFi U7 Lite WiFi 7 Access Point

This access point is an option if you can run an Ethernet connection to the more distant area; the described setup also requires PoE power.

Dual band with a 2.5-GbE port; mesh support is listed in the product specifications.

Shop at Joybuy

Frequently asked questions

Where should I place a wireless repeater for the upper floor?

Choose a position where the repeater still has a decent connection to the router or the mesh node it’s intended to connect to – not in the dead zone itself. Once it’s set up, check the connection indicator. If the signal is weak, try another position.

Can I connect my games console to a repeater via LAN?

Yes, if the model you choose has a suitable LAN port. If the repeater itself connects wirelessly, that wireless link is still part of the route to the router. For a wired LAN bridge, the device needs to support the relevant operating mode.

What should I check if downloads are still slow despite better Wi-Fi?

Check separately whether your internet connection is delivering the expected data rate and whether the connection to your gaming device is weak. Germany’s Federal Network Agency provides a broadband measurement tool that is independent of provider and technology, allowing you to compare your connection with the data rate agreed in your contract.

What additional devices or connections might I need?

Depending on the solution, you may need additional mesh nodes, powerline adapters or a network cable. Check what’s included and what the specific model requires, such as a LAN connection, compatible router or PoE power supply.

What legal requirements should I be aware of when buying a wireless repeater?

Germany’s Federal Network Agency explains that products covered by relevant EU harmonisation legislation must carry a CE marking and be accompanied by the necessary documentation. In Germany, the 2.4 and 5 GHz Wi-Fi frequency bands are generally allocated for use; the applicable conditions still apply. This does not confirm that any specific product listing complies with these requirements.