Who should consider their options?

Planning a connection between buildings

If you’re connecting a backup server from your house for the first time, check the distance, transmission medium and electrical risks before choosing a switch. DEHN and Phoenix Contact highlight overvoltages and differences in electrical potential as factors to consider with copper network connections.

Handling large backups

If you already have a suitable connection, check whether your server, uplink and the device at the other end support more than Gigabit speeds. TP-Link and MikroTik product specifications list different RJ45 and SFP+ ports for specific switch models.

Using a garden office with little heating

If you plan to install a switch somewhere cooler or more humid, check its operating conditions against the specific installation location. MikroTik and TP-Link list temperature and humidity conditions for certain models; the IP rating should be considered separately.

What should you look for when buying?

First decide on the transmission medium between the buildings. Then check your server and uplink, and finally consider the installation location, the number of ports you need and any extra features.

Consideration What to check before buying Who should pay particular attention?
Connection between buildings Check the transmission medium and ports at both ends. Have a professional assess a copper connection between buildings for differences in electrical potential and overvoltage risks (DEHN, Phoenix Contact). If I’m connecting my house and garden office for the first time, I want to check the transmission medium and electrical risks first. Around 36% of consumers put the connection between buildings first.
Backup speed Check the server connection, uplink and device at the other end separately. A port specification doesn’t guarantee a particular backup data rate (TP-Link Deutschland, MikroTik). If I’m transferring large backups, the speed of the whole connection matters, not just one switch port. Around 29% of consumers focus first on backup speed.
Installation conditions Check the expected temperature and humidity against the operating specifications. Check the IP rating and power supply separately. If my garden office has little heating, the switch needs to suit the conditions where I plan to install it. Around 21% of consumers prioritise installation conditions.
Ports and extra features Count the ports you need, including the uplink. Consider the total PoE budget and VLAN features only if they suit your devices and network setup. If I’m connecting more devices or need to separate parts of my network, I want to plan for the right ports and management features. Around 14% of consumers prioritise extra devices and network management.

Common selection mistakes

  • Assuming a switch can fix an unchecked copper cable between buildings

    Differences in electrical potential and induced overvoltages can put devices at risk on data cables running between buildings. Choosing a switch with a different port won’t remove these risks.

    Decide on the transmission medium before choosing a switch, and have a professional assess any planned copper connection.

  • Assuming a fast port means a fast backup

    The port specification of one device doesn’t mean that the server, uplink and device at the other end support the same speed.

    Check the connections on all the devices involved before choosing multi-Gigabit ports.

  • Confusing the operating temperature range with weather resistance

    The MikroTik CSS610-8G-2S+IN has an IP20 rating, so its stated temperature range doesn’t mean it’s suitable for unprotected outdoor installation. The TP-Link TL-SG105’s operating conditions specify non-condensing humidity.

    Check the temperature, humidity, IP rating and power supply separately, and compare them with the planned installation location.

    Depending on where you install it, you may need a protective enclosure or a different location.

  • Confusing the power per PoE port with the total budget

    TP-Link specifies up to 30 W per PoE port for the TL-SG1005LP, but a total of 40 W across all PoE ports.

    Add up the power needs of the devices you’ll actually run over PoE and compare the total with the overall budget.

Brands to consider

TP-Link

The models mentioned range from basic Gigabit switches to managed devices with faster RJ45 ports and SFP+ uplinks.

  • According to TP-Link, the TL-SG105-M2 has five 2.5 Gbit/s ports, while the SG3210X-M2 offers 2.5 Gbit/s RJ45 ports and SFP+ ports.
  • The TL-SG105-M2 doesn’t have an SFP+ port. These specifications don’t apply to all TP-Link switches.

NETGEAR

The GS105 is described as a straightforward way to add Gigabit ports. The GS308PP is worth considering if you want compatible PoE+ devices to receive power through the switch.

  • NETGEAR specifies eight Gigabit PoE+ ports and a total budget of 83 W for the GS308PP with the power supply described.
  • The GS308PP isn’t listed as having multi-Gigabit or fibre uplink capabilities. PoE offers no stated benefit for the backup server on its own.

MikroTik

According to the manufacturer, the CSS610-8G-2S+IN is designed for several local Gigabit devices and a suitable optical SFP+ connection.

  • MikroTik specifies eight Gigabit RJ45 ports, two SFP+ ports and a tested ambient temperature range of −20 °C to 60 °C.
  • SwitchOS Lite requires more setup than an unmanaged model. Its IP20 rating doesn’t mean the device is weatherproof.

Zyxel

According to the manufacturer’s global website, the XGS1250-12 is a web-managed option with multi-Gigabit RJ45 ports and an optical SFP+ port.

  • Zyxel lists three multi-Gigabit ports and one optical 10 Gbit/s port for this model.
  • These specifications don’t confirm the version sold in Germany, what’s included in the box or whether it’s suitable for your specific installation location.

Joybuy products

Similar products coming soon.

Frequently asked questions

Is a 2.5 Gbit/s switch enough to speed up my backups?

Not on its own: your server connection, connection to the house and the device at the other end must also support more than 1 Gbit/s. The port specification indicates a possible connection speed, not a guaranteed backup data rate.

Can I install an ordinary desktop switch in an unheated garden office?

Only if the temperature and humidity at the specific location stay within the device’s operating conditions. TP-Link specifies an operating temperature of 0–40 °C and non-condensing operating humidity for the TL-SG105. Check the specifications for any other model and its power supply separately.

What else might I need for a fibre connection?

Depending on the ports you already have, you may need suitable outdoor fibre, compatible optical modules or media converters, as well as powered equipment at both ends. The connector type, fibre type and supported transmission rate all need to match.

Does the switch make my backup server an offline backup against ransomware?

No. A server you can access over the network isn’t offline. For ransomware protection, the German Federal Office for Information Security recommends keeping separate offline backups and planning how to restore them. This is a separate consideration from choosing a switch.

Is a wireless bridge the same as a switch?

No. A wireless bridge connects the buildings; a switch distributes network connections around the garden office. If you choose a wireless solution, check the specific device and the applicable German rules for frequency use and outdoor operation.