Who should consider these options?

Teams working with large project files

If you exchange files between your garden office and devices in the house, the connection between the buildings matters just as much as the Wi-Fi at your desk. TP-Link describes Ethernet backhaul as a connection between Deco units via a network cable. NETGEAR also notes that Ethernet backhaul can be helpful over long distances or in buildings with challenging construction.

Garden offices without a cable route

If there’s no network cable running to your office, check whether the planned node location can still get a reliable wireless connection to the house. As NETGEAR explains, distance and building construction can affect the wireless connection between the router and satellite.

People with an existing mesh network

If you only want to add one node, check that its model, product range and supported operating mode match your existing system. TP-Link points out that Deco, Archer and Omada don’t form one unified mesh. FRITZ! explains how to connect a repeater to a FRITZ! mesh as a LAN bridge.

What should you look for when buying?

Ethernet backhaul

A good fit if: there’s a suitable cable route to your garden office and you regularly exchange project files with devices in the house.

Things to consider: You’ll need to plan the cable run and suitable connections. A wired backhaul alone doesn’t tell you anything about the Wi-Fi connection between your device and the node.

Wireless backhaul

A good fit if: running a cable isn’t practical and a node can still maintain a reliable connection to the house from a suitable location.

Things to consider: The connection between nodes will still depend on distance and building construction. Test the planned location with a file transfer.

Priority What to check before buying Who it matters most to
Backhaul for project files Check the cable route and Ethernet backhaul support for the specific system. After setup, confirm that the node is actually using the cable. If I regularly transfer files between the office and house, a reliable connection between the nodes matters to me. Around 36% of consumers prioritise file transfers.
Wireless connection without a cable route Check the signal to the house from the planned location and carry out an actual file transfer. The Wi-Fi indicator on your device alone isn’t enough. If there’s no cable running to the garden office, I need a location where the node itself can still connect to the house. Around 29% of consumers prioritise a practical wireless backhaul.
Expanding an existing mesh Check the brand, product range, router and node models, as well as the supported operating mode. TP-Link treats Deco, Archer and Omada as separate mesh product ranges. If I only want to add one node to my existing network, I want to check compatibility before buying. Around 21% of consumers focus on expanding their existing system.
Outdoor installation Check whether the location is indoors or outdoors, whether the specific device is rated for that setting, and what mounting and power supply it needs. If the node is actually going to be mounted outdoors, I need a model designed for that use. Around 14% of consumers prioritise suitable outdoor installation.

Common buying mistakes

  • Confusing the advertised total Wi-Fi speed with the speed of a project file transfer

    When transferring files between devices in the house and the garden office, both the backhaul between the mesh nodes and the connection to your device matter.

    First check the actual connection route, then test a representative file transfer from your location.

  • Placing the node where its own Wi-Fi is strong, but the backhaul is weak

    Distance and building construction can affect the connection between the router and satellite. A stronger Wi-Fi signal at your desk won’t fix a weak backhaul to the house.

    Check the signal from the node’s location towards the house. Consider Ethernet backhaul if the wireless connection there isn’t reliable.

  • Assuming mesh compatibility based on the brand name alone

    Products from the same brand may belong to different mesh product ranges. TP-Link explicitly states that Deco, Archer and Omada don’t form one unified mesh.

    Before buying a single extra node, check the product range, specific model and supported operating mode.

  • Installing a device designed for indoor use outdoors without checking

    Outdoor suitability can’t be assumed across different mesh models. A sheltered spot inside a garden office is not the same as an outdoor installation.

    Distinguish between the two locations and check the manufacturer’s guidance for the specific device, including where it can be used, how it should be mounted and how it’s powered.

Mesh brands to consider

FRITZ!

A potential expansion option for people with an existing FRITZ!Box mesh who are considering a compatible repeater.

  • FRITZ! describes how to connect repeaters to a FRITZ! mesh as a LAN bridge. According to the manufacturer, the FRITZ!Repeater 3000 AX has two Gigabit LAN ports.
  • This information doesn’t confirm that this model is suitable for outdoor installation or indicate its performance over the specific route to your garden office.

TP-Link

Deco mesh with Ethernet backhaul; the Deco X50-Outdoor is a separate option if you plan to mount a node outdoors.

  • TP-Link describes a wired backhaul for Deco. For the Deco X50-Outdoor, the manufacturer specifies IP65 protection and PoE or AC power.
  • According to TP-Link, Deco, Archer and Omada don’t form one unified mesh. The model, product range and power supply need to suit your planned setup.

ASUS

ZenWiFi and AiMesh are worth considering if you’re buying a new mesh system with Ethernet backhaul.

  • ASUS documents Ethernet backhaul. For the ZenWiFi XT9, the manufacturer specifies a 2.5 Gbit/s WAN port and three Gigabit LAN ports.
  • Port specifications are manufacturer figures, not a measure of file transfer speeds or a guarantee of outdoor suitability.

NETGEAR

Orbi is an option if you’re considering a new mesh system with a wired backhaul.

  • For the Orbi 770, NETGEAR specifies a 2.5 Gbit/s wired backhaul and lists long distances or challenging building construction as possible reasons to use Ethernet backhaul.
  • The advertised total Wi-Fi speed isn’t a measure of the connection between your house and garden office.

Joybuy products for mesh Wi-Fi

This selection includes Deco mesh systems and nodes for wired backhaul setups, as well as a Ubiquiti mesh access point. For each model, check compatibility with your existing system and suitability for the planned installation location.

TP-Link Deco BE22, 2-pack, mesh system with Wi-Fi 7, dual-band and Gigabit Ethernet

TP-Link Deco BE22, 2-pack, mesh system, Wi-Fi 7, dual-band, Gigabit Ethernet, white

For a Deco mesh with Ethernet backhaul when there’s a suitable cable route to your garden office. TP-Link describes a wired backhaul between Deco units. After setup, check the operating mode of the specific system.

The product name specifies Wi-Fi 7, dual-band and Gigabit Ethernet. The product description says it’s designed for a dry indoor environment and warns against water, excessive moisture and direct sunlight.

View at Joybuy
Ubiquiti U7 Mesh with 5000 Mbit/s and Power over Ethernet

Ubiquiti U7 Mesh, 5000 Mbit/s, Power over Ethernet

This model may suit you as a mesh access point if you’re planning a compatible wired connection. Before installing it outdoors, check the device’s suitability, the PoE or PoE+ power supply required and the conditions for the cable route.

The product name specifies 5000 Mbit/s and Power over Ethernet. For outdoor cable routes, the product description specifies shielded cables from Cat 6, grounding and surge protection.

View at Joybuy
TP-Link Deco M4, single mesh node, AC1200, dual-band and Gigabit ports

TP-Link Deco M4, 1-pack, AC1200, dual-band, Gigabit ports

Designed as a single node for expanding an existing Deco network. TP-Link describes Ethernet backhaul for Deco units; before buying, check whether this specific model is suitable for your planned backhaul.

The product name specifies AC1200, dual-band and Gigabit ports. This model is designed for indoor use; the product description gives an operating temperature range of 0 °C to 40 °C.

View at Joybuy
TP-Link Deco M4, 3-pack, AC1200, dual-band and Gigabit ports

TP-Link Deco M4, 3-pack, AC1200, dual-band, Gigabit ports

A three-unit Deco mesh system for extending your network across several rooms. If you want to use Ethernet backhaul, check the cable route and whether the nodes will actually use this operating mode.

The product name specifies Wi-Fi 5, dual-band AC1200 and two Gigabit LAN/WAN ports per unit.

View at Joybuy
TP-Link Deco X1500, 2-pack, Wi-Fi 6, dual-band AX1500 and Gigabit ports

TP-Link Deco X1500, 2-pack, Wi-Fi 6, dual-band AX1500, Gigabit ports

For a two-unit Deco mesh if you’re considering a wired backhaul. TP-Link describes Ethernet backhaul between Deco units; check that the specific model and planned installation are suitable.

The product name specifies Wi-Fi 6, dual-band AX1500 and Gigabit ports on each unit. The product description warns against water and extreme temperatures.

View at Joybuy

Frequently asked questions

Is a fast internet speed test enough to check file transfers for project work?

No. An internet speed test alone won’t tell you how well files transfer between devices in the house and your garden office. Check the actual backhaul and test a file transfer within your local network.

How can I check whether Deco is actually using the network cable for backhaul?

TP-Link explains how to check in the Deco app: open the network map and check whether Ethernet backhaul is active for the satellite.

Can I simply add a Deco node to a TP-Link Archer mesh?

Not as part of the same unified mesh. TP-Link treats Deco, Archer and Omada as separate mesh product ranges. Check the specific product range and operating mode before buying.

Can I install a standard mesh node outdoors?

Only if the specific model is designed for that use. TP-Link identifies the Deco X50-Outdoor as suitable for outdoor installation and specifies IP65 protection and PoE or AC power. These details don’t automatically apply to other mesh models.

How can I protect access to project files on my home network?

The Federal Office for Information Security recommends changing default passwords and keeping your router’s firmware up to date. A separate guest Wi-Fi network can keep visitors off your own network. Also check the sharing settings on the devices where your project files are stored.