Who is this choice relevant to?

Uploading photos from a garden office

If you want to upload larger photo albums from a separate workspace, you’ll need to distinguish between your broadband upload speed and the connection to your garden office.

Households with an existing mesh system

If you want to extend your FRITZ!-, Deco- or AiMesh system, check that it’s compatible with your existing router and mesh nodes.

Garden offices without an Ethernet cable

If you can’t run an Ethernet cable, the choice between wireless mesh and Powerline depends on whether you can get a usable connection at a potential node location or at the sockets you plan to use.

What should you look for when buying?

Mesh with Ethernet backhaul

Suitable if: an Ethernet cable reaches your garden office or a suitable outdoor location. This removes the wireless link between the buildings.

Bear in mind: the cable route, power supply and compatibility with your existing mesh system all need to be right.

Wireless mesh

Suitable if: you don’t have a cable, but there’s a location between the house and garden office that still gets a usable connection to the main network.

Bear in mind: a node placed where the signal is already poor can’t compensate on its own for a weak connection from the house.

Powerline with Wi-Fi

Suitable if: you can’t run an Ethernet cable and your electrical wiring can provide a connection to the garden office.

Bear in mind: performance can vary depending on the socket and sources of electrical interference, so test the sockets you plan to use.

Priority What to check before buying Who is it especially important to?
Connection between the house and garden office Check the signal at a potential node location and whether there’s an existing cable route. For the wirelessly connected Deco X50-Outdoor, TP-Link recommends a maximum distance of 10 metres from the upstream Deco; this isn’t a general guarantee of range. If you want to connect a separate workspace reliably to your home network, the connection method is the main consideration. Around 36% of consumers say the connection between the house and garden office is their top buying priority.
Upload speed and bottlenecks Measure your broadband upload speed and the connection at your desk separately, using comparable tests where possible. The Federal Network Agency’s broadband measurement tool measures your internet connection’s data rate. If you want to find out whether your broadband or home network is limiting photo uploads before buying a device, separate measurements are essential. Around 29% of consumers put identifying the upload bottleneck first.
Compatibility with your home network Check your router and node models: TP-Link lists Deco compatibility for the X50-Outdoor, FRITZ! says the Repeater 2700 can be integrated into a FRITZ!Box mesh, and ASUS lists AiMesh-compatible routers for the ZenWiFi XD5. If you want to extend an existing mesh system without setting up a second system that isn’t compatible, system compatibility is crucial. Around 21% of consumers prioritise integration with their existing home network.
Outdoor installation and power supply Check the installation location, power connection and cable route. TP-Link lists the Deco X50-Outdoor as IP65-rated and says it can be powered by PoE or AC. If the device will actually be installed outdoors without shelter, you’ll need to check its suitability and power supply for that exact location. Around 14% of consumers put outdoor installation and the work involved first.

Common buying mistakes

  • Confusing combined Wi-Fi data rates with photo upload speed

    Advertised Wi-Fi data rates and the actual upload speed of your broadband connection are different things. The Federal Network Agency’s broadband measurement tool measures your connection’s data rate; it doesn’t replace checking the connection in your garden office.

    Measure your broadband connection first, then the connection at your desk, before choosing how to connect the two.

  • Putting the wireless node where the signal is already weak

    A wireless mesh node needs a usable connection to the upstream node itself. For the Deco X50-Outdoor, TP-Link’s guidance on distance and potential obstacles applies to a wireless connection.

    Check potential locations between the house and garden office. If there’s a suitable cable route, consider Ethernet backhaul.

  • Assuming Powerline is a guaranteed substitute for an Ethernet cable

    The connection can depend on your electrical wiring, the socket and sources of electrical interference. devolo lists a garden shed on the same circuit as a possible use case, but also warns that transfer speeds can be low at some sockets.

    Test the connection at the sockets you actually plan to use. If you’re adding to an existing system, check that the product ranges are compatible.

  • Installing an indoor node outside just because of its Wi-Fi specifications

    Outdoor suitability isn’t automatically guaranteed for other mesh nodes. TP-Link specifically lists an IP65 rating for the Deco X50-Outdoor; this doesn’t mean indoor models are suitable for outdoor use.

    Distinguish between a dry location inside your garden office and an exposed outdoor installation, and check the specifications for the exact model.

Key brands at a glance

TP-Link

Depending on the installation location, the Deco X50-Outdoor or Deco X50 could suit an outdoor location or an existing Deco mesh system.

  • TP-Link lists an IP65 rating and PoE support for the Deco X50-Outdoor, and says it can be combined with other Deco models in a mesh system.
  • For a wireless connection, TP-Link recommends a maximum distance of 10 metres from the upstream Deco for this model. This recommendation doesn’t guarantee a connection across every property.

FRITZ!

The FRITZ!Repeater 2700 is an option if you want to extend a compatible FRITZ!Box mesh system.

  • FRITZ! lists a 2.5 Gigabit LAN port and explains how to add the repeater to a FRITZ!Box mesh as a LAN bridge.
  • The LAN port doesn’t guarantee a corresponding internet upload speed or make the device suitable for exposed outdoor installation.

devolo

The Magic 2 WiFi 6 next Starter Kit combines Powerline with Wi-Fi at a remote location if a wireless link doesn’t seem practical.

  • devolo lists a garden shed on the same electrical circuit as a possible use for Powerline.
  • devolo warns that transfer speeds can be low at some sockets. According to the manufacturer, Magic adapters aren’t suitable for extending a dLAN Powerline network.

ASUS

The ZenWiFi XD5 is an indoor mesh option if you need Ethernet backhaul or a compatible AiMesh router.

  • ASUS documents Ethernet backhaul and compatibility with AiMesh-compatible routers.
  • This information doesn’t confirm reception on the specific route to your garden office or suitability for exposed outdoor installation.

Joybuy products

Joybuy products for extending mesh Wi-Fi to your garden office, including a possible outdoor location with a compatible system.

Ubiquiti UniFi U6 Mesh WiFi 6 indoor/outdoor access point with PoE adapter

Ubiquiti UniFi U6 Mesh WiFi 6 Indoor/Outdoor Access Point

For a possible outdoor location with a compatible UniFi network; according to the product details, wireless meshing is designed for compatible UniFi networks.

Wi-Fi 6; IPX5; 6 Spatial Streams.

PoE power supply; PoE adapter included. Gigabit Ethernet uplink.

For outdoor installation, the LED side must face upwards and you must use the supplied wall or pole mount. Ethernet ports and cable entries must be protected from water.

View at Joybuy

Frequently asked questions

How can I tell before buying whether Wi-Fi is slowing down my photo uploads?

First, measure your internet connection without the wireless link to your garden office, if possible, then compare the result with a measurement at your desk. The Federal Network Agency provides a broadband measurement tool that’s independent of providers and technology; an individual result won’t automatically show what’s causing any difference.

Where should I place a wirelessly connected outdoor mesh node?

The node still needs a usable connection to the device upstream. For a wireless connection to the Deco X50-Outdoor, TP-Link recommends a maximum distance of 10 metres and as few obstacles as possible. This specific guidance on wireless distance doesn’t apply to a wired connection.

Can I rely on Powerline in my garden office without testing the sockets?

No, test the connection at the sockets you plan to use. devolo lists a garden shed on the same electrical circuit as a possible use case, but also warns of low transfer speeds at some sockets and interference from other electrical devices.

Can I put any mesh device outdoors and use all Wi-Fi bands there?

No. The term mesh doesn’t mean a device is suitable for outdoor installation, nor does it mean that all Wi-Fi bands are automatically permitted outdoors. The Federal Network Agency publishes general allocations with conditions for Wi-Fi use. Check the German product information for the specific device, its intended installation location and the relevant operating conditions. This doesn’t amount to a blanket approval or a blanket ban on any particular configuration.

How can I keep my extended Wi-Fi network secure for private photos?

The Federal Office for Information Security recommends changing default passwords and keeping your router’s firmware up to date. Check these settings after extending your network, too.