Who is this solution for?

A garden office with a weak wireless signal

If there are obstacles between your home and office, what matters is whether the wireless link between the mesh nodes is reliable or whether you can run an Ethernet cable.

A garden office with an existing LAN connection

If you can run an Ethernet cable to your garden office, check whether the node can be added to your existing mesh as a LAN bridge.

Planning an outdoor installation

If you’re placing a node outside, check that it’s rated for outdoor use, has a suitable power supply and can be installed in the right place. An indoor range claim alone isn’t enough.

What should you look for when buying?

First, check the connection between your home and garden office, as well as the speed at your playback device. Then check compatibility with your existing network and whether the device is suitable for its intended installation location.

What you need What to check Who is it important to?
A reliable backhaul Check whether a LAN backhaul is possible. For a wireless connection, test the signal at the node’s planned location. If I want to watch a concert stream reliably in my garden office, the connection needs to reach it from my home. Around 40% of consumers in this scenario put a reliable backhaul at the top of their buying priorities.
Speed at the playback device Measure the connection at your router and intended playback device. Netflix recommends a stable 5 Mbit/s for FHD and 15 Mbit/s for 4K for its own live events and other content; other streaming services may have different requirements. I want to know whether the specific streaming service gets enough speed at my playback device; a marketed Wi-Fi data rate won’t tell me that. Around 30% of consumers prioritise the stream’s performance on their end device.
Compatibility with your home network Check the product family, operating mode and setup process. FRITZ! says the FRITZ!Repeater 3000 AX can be added to a mesh as a LAN bridge when connected to a FRITZ!Box running FRITZ!OS 7 or later. If I want to keep using my existing router, the extender I choose needs to be compatible with it. Around 20% of consumers put compatibility with their existing home network first.
Outdoor installation If you plan to place the node outside, check that the specific model is suitable for outdoor use and that its mounting and power requirements suit your setup. If you’re actually planning to install the node outdoors, you’ll need a model designed for it and a suitable installation. Around 10% of consumers put outdoor installation first.

Common buying mistakes

  • Buying a mesh device when your internet connection is too slow

    Mesh distributes the internet connection you already have. It won’t fix a bottleneck with the connection itself.

    Measure the connection at your router and playback device before choosing any extra hardware.

  • Confusing a strong Wi-Fi signal in your office with a good backhaul

    A node can provide a strong local signal in your garden office even if its connection to the device in your home is weak.

    Check the backhaul at the planned location. If you can run a cable, be sure to compare a wired LAN connection.

    If the wireless link isn’t strong enough, you may later need another node or to run a cable.

  • Installing an indoor device outside without checking first

    Whether a device is suitable for outdoor use depends on the specific model. Its power supply and wireless conditions also need to suit the installation.

    For an outdoor installation, choose hardware specifically designed for it and check the operating conditions in Germany for the model and frequency band.

Key brands at a glance

FRITZ!

A relevant choice if you want to extend an existing FRITZ! network.

  • FRITZ! says the FRITZ!Repeater 3000 AX can be added to a mesh with a FRITZ!Box as a LAN bridge.
  • According to FRITZ!, this requires a FRITZ!Box running FRITZ!OS 7 or later. It doesn’t confirm outdoor suitability or any particular wireless performance in your garden office.

TP-Link

The Deco range includes indoor models and, with the Deco X50-Outdoor, a model specifically designed for outdoor use.

  • TP-Link lists IP65 protection, PoE and wired or wireless connectivity for the Deco X50-Outdoor.
  • TP-Link’s recommended spacing and placement for the wireless Deco X50-Outdoor don’t automatically apply to other models. TP-Link says you need a TP-Link ID to set up Deco.

ASUS

The ZenWiFi XD5 is an option if you want multiple nodes and Ethernet backhaul.

  • ASUS describes the XD5 as supporting Ethernet backhaul and AiMesh.
  • Figures for total data rates or coverage areas don’t guarantee the same performance in a garden office. Nor do they confirm that the device is suitable for outdoor installation.

NETGEAR

Orbi systems are worth considering if you want a choice of wireless or Ethernet backhaul.

  • NETGEAR documents both types of backhaul for Orbi.
  • NETGEAR recommends updating the firmware before setting up an Ethernet backhaul. This doesn’t guarantee wireless performance between buildings.

Joybuy products for your garden office

This selection includes mesh kits and extension nodes to help connect your garden office. The Ubiquiti U7 Mesh is described as suitable for indoor and outdoor use. For every model, check that the backhaul and planned installation location are a good match.

TP-Link Deco BE22 Wi-Fi 7 mesh system, 2-pack

TP-Link Deco BE22, 2-pack

A two-device mesh kit for setting up a new network to connect your garden office.

Wi-Fi 7, dual-band and Gigabit WAN/LAN ports on each device. According to the product information, it’s intended for dry indoor areas; keep it away from water, excessive moisture and direct sunlight.

View at Joybuy
TP-Link Deco M4 mesh Wi-Fi node, 1-pack

TP-Link Deco M4, 1-pack

Described as a single node for extending an existing Deco network; check that the operating mode you need is compatible with your current system.

AC1200, dual-band and Gigabit ports. Designed for indoor use; according to the product information, protect it from rain, moisture and extreme temperatures.

View at Joybuy
TP-Link Deco M4 mesh Wi-Fi system, 3-pack

TP-Link Deco M4, 3-pack

A three-device mesh system for providing Wi-Fi in several areas.

AC1200, dual-band and Gigabit ports. The product information lists seamless roaming.

View at Joybuy
TP-Link Deco X1500 Wi-Fi 6 mesh system, 2-pack

TP-Link Deco X1500, 2-pack

A two-device mesh kit for bringing Wi-Fi to another area.

Wi-Fi 6, AX1500, dual-band and Gigabit ports. The product information lists app-based setup.

View at Joybuy
Ubiquiti U7 Mesh access point with PoE

Ubiquiti U7 Mesh

A mesh-capable access point for indoor and outdoor use, if an Ethernet uplink with PoE suits your installation.

The product name lists 5000 Mbit/s and Power over Ethernet. For outdoor Ethernet runs, the product information specifies shielded cables from Cat 6, along with suitable grounding and surge protection.

View at Joybuy

Frequently asked questions

Do I need Wi-Fi 7 for a concert stream?

No. The Wi-Fi standard alone doesn’t tell you whether the stream will run reliably at the intended location. Measure the connection at your playback device and check the requirements of the service you’re using. Netflix recommends a stable 5 Mbit/s for FHD and 15 Mbit/s for 4K for its own live events and other content; these aren’t universal requirements for every concert stream.

Where should I place a wirelessly connected node?

Place it where it can still get a good signal from the upstream device while also providing coverage to your garden office. For the wirelessly connected Deco X50-Outdoor, TP-Link recommends a preferred distance of no more than 10 m and a maximum of 15 m. TP-Link doesn’t specify this distance limit for a wired connection.

Can PoE carry both data and power for the Deco X50-Outdoor?

Yes. TP-Link confirms Ethernet backhaul with PoE power and lists an IEEE-802.3at PoE switch or injector as a power source. Check which components you’ll need for your planned installation and whether you already have them.

Can I use a mesh device outdoors in Germany?

The term ‘mesh’ doesn’t mean that every device can automatically be used with every frequency band. Germany’s Federal Network Agency publishes frequency regulations for the country. Check the applicable operating conditions for your specific model and band, as well as its stated suitability for outdoor use. You can’t determine from this alone whether an unspecified device is permitted at a particular outdoor location.