Which connection options are right for you?

Garden office with a possible cable route

If you regularly back up files to a destination in your home and can run a network cable to your office, LAN backhaul and compatible ports are important things to check. heise describes wired and wireless connections as possible ways to link an access point to the rest of your network.

Garden office without a network cable

Without a network cable, your choice depends on whether you can find a suitable Wi-Fi location or get a Powerline connection working on site. heise describes Wi-Fi as one possible connection option, while devolo notes that data transmission over power lines can be affected by interference.

Workspace with outdoor installation

If you plan to place a node outdoors, check that the specific model is suitable, along with its installation location and power supply. TP-Link lists these features for the Deco X50-Outdoor, including an IP65 rating and PoE support.

What should you look for when buying?

For regular backups to your home, first decide how you’ll connect your garden office to your home network. Then check that the backup itself works.

When choosing mesh Wi-Fi to back up work documents from a garden office, consumers have a range of different priorities.

Priority What to check before buying Who is it most relevant to?
Reliable wired connection Cable route to the office and LAN backhaul on the specific node If I regularly back up files to a destination in my home, I want a connection that doesn’t depend on Wi-Fi reception between the buildings. Around 31% of consumers prioritise a wired connection.
Suitable Wi-Fi location Reception at the intermediate location and connection to the backup destination Without a network cable, I want to know whether a node at the planned location can still get a usable connection to the rest of the network. Around 25% of consumers prioritise finding a suitable Wi-Fi location.
Outdoor installation and power supply Whether the specific model is suitable for outdoor use and has the right power supply If a node needs to be installed outdoors, I need a model designed for the job and a suitable power supply. Around 19% of consumers have outdoor installation as their main priority.
Connection over power lines Test the adapters in the intended sockets and check the backup connection If neither a cable route nor a good Wi-Fi location is practical, I want to find out whether Powerline will work with the sockets I have. Around 13% of consumers check this option first.
Restorable backup Plan the backup destination, data recovery and firmware maintenance separately from the mesh network For my work documents, the connection isn’t the only thing that matters; I also need to be able to restore backed-up files. Around 12% of consumers prioritise backup protection.

Which mistakes should you avoid?

  • Putting an extra node straight in a Wi-Fi dead spot

    A mesh node still needs a working connection to the rest of the network. For a wireless connection to the Deco X50-Outdoor, TP-Link recommends keeping it no more than 10 m from the preceding Deco where possible. This is a recommendation for this model, not a general guarantee of range.

    First, check reception at the planned intermediate location. If the Wi-Fi signal is weak there, consider running a cable.

  • Installing an indoor model outdoors because its model number looks similar

    The Deco X50 and Deco X50-Outdoor are different models. TP-Link gives the X50-Outdoor an IP65 rating; a similar model name alone doesn’t mean a device is suitable for outdoor use.

    Check the full model name against the intended installation location.

    Depending on your setup, you may also need a device designed for outdoor use and a suitable power supply.

  • Assuming advertised Wi-Fi speeds are the same as backup speeds

    Transfer speeds also depend on the backhaul and backup destination. With Powerline, interference from the electrical network can also affect data transmission, as devolo explains in its advice guide.

    Test the transfer to the actual backup destination instead of comparing the Wi-Fi figures on the packaging alone.

  • Taking a place in a comparison list as proof that a product is still a good buy

    A place in a comparison list doesn’t, by itself, tell you whether a product is still worth buying new. NETGEAR explicitly marks the Orbi Pro SXK80 as End-of-Life.

    Check the manufacturer’s status for the full model and make sure it has the support your setup needs.

Which brands are worth considering?

TP-Link

The Deco range includes indoor mesh systems and, with the X50-Outdoor, a node designed for outdoor installation.

  • For the Deco BE25, TP-Link lists two 2.5 Gbit/s ports and wired backhaul; the manufacturer gives the X50-Outdoor an IP65 rating and says it supports PoE.
  • These specifications apply to the models in question and don’t confirm a particular backup speed or features across all Deco devices.

FRITZ!

FRITZ!Repeaters are an option if you want to extend an existing FRITZ! home network.

  • FRITZ! documents a LAN bridge for the FRITZ!Repeater 3000 AX.
  • The mesh setup described requires a FRITZ!Box running FRITZ!OS 7 or later. It isn’t a blanket guarantee of compatibility with other routers.

devolo

Magic 2 WiFi 6 next combines Powerline with mesh Wi-Fi. It could be a useful connection option if running a new cable or finding a suitable Wi-Fi location isn’t possible.

  • devolo lists mesh Wi-Fi and Gigabit LAN ports among the product’s features.
  • The manufacturer also warns that interference and low transfer speeds can occur with some sockets. You should therefore test the connection between your home and garden office on site.

NETGEAR

The Orbi Pro SXK80 is a documented business mesh system, but its product status is worth bearing in mind when looking at older comparisons.

  • NETGEAR’s data sheet lists separate Wi-Fi networks and VLAN assignment for this model.
  • NETGEAR marks the SXK80 system as End-of-Life, so its appearance in an older product comparison shouldn’t automatically be taken as a recommendation to buy new.

Joybuy products for your garden office

This selection includes an access point described as suitable for outdoor installation, as well as Deco mesh products for indoor use. For a garden office, the installation location and intended connection method are key.

Ubiquiti U7 Mesh 5000 Mbit/s Power over Ethernet

Ubiquiti U7 Mesh 5000 Mbit/s PoE

Described as a weather-resistant access point with an IPX6-rated enclosure, this model could suit a suitable outdoor location. Product details recommend using shielded Cat-6 or higher-grade cables for outdoor wiring, along with earthing and surge protection. A suitable injector or switch is required for PoE.

View at Joybuy
TP-Link Deco M4 AC1200, 1-pack

TP-Link Deco M4 AC1200, 1-pack

This model could work as a single additional unit in a compatible Deco setup with a wired connection. The product description explicitly states that it’s for indoor use only.

Product name specifications: 1-pack, dual-band and Gigabit ports.

View at Joybuy
TP-Link Deco M4 AC1200, 3-pack

TP-Link Deco M4 AC1200, 3-pack

With three mesh units, you can plan a setup that covers several rooms. For backups from your garden office, you should also check that the connection to your home network works at the intended location.

Product name specifications: 3-pack, dual-band and Gigabit ports.

View at Joybuy
TP-Link Deco X1500 Wi-Fi 6 AX1500, 2-pack

TP-Link Deco X1500 Wi-Fi 6 AX1500, 2-pack

This set of two mesh units could be suitable for a setup with multiple nodes. Whether the connection to your garden office can handle regular backups depends on the planned connection and location.

Product name specifications: dual-band and Gigabit ports.

View at Joybuy
TP-Link Deco X10 Wi-Fi 6 AX1500, 1-pack

TP-Link Deco X10 Wi-Fi 6 AX1500, 1-pack

This single unit can be used to expand an existing Deco setup. Before you buy, check that it’s compatible with your current system and that it will get the connection it needs at the planned location.

Product name specifications: dual-band, two Gigabit ports and WPA3.

View at Joybuy

Frequently asked questions

Is a mesh system enough to back up my files?

No. Mesh provides a network connection; you’ll also need a backup destination and a backup process. Germany’s Federal Office for Information Security points out that you also need to be able to restore your data successfully.

How do I connect a FRITZ!Repeater to my garden office by cable?

For the FRITZ!Repeater 3000 AX, FRITZ! describes connecting it to a LAN port on the FRITZ!Box using a network cable, then adding it to the mesh at the touch of a button. According to the manufacturer, this setup requires FRITZ!OS 7 or later on the FRITZ!Box.

What ongoing costs or extra components should I budget for?

Check everything your setup needs, including any extra nodes, cables and a suitable PoE power supply. If you’re using Powerline, test the intended sockets; NETGEAR marks the Orbi Pro SXK80 as End-of-Life. The components you need will depend on your connection method and installation location.

Do I need an individual frequency allocation for Wi-Fi in Germany?

Germany’s Federal Network Agency lists frequency bands generally allocated for Wi-Fi at 2.4 and 5 GHz, subject to the relevant terms of use. This doesn’t mean that every device, frequency band or operating mode is automatically approved for outdoor installation.