Which solution is right for you?

Garden office with an Ethernet connection

If there’s an Ethernet cable in your garden office, you can set up Wi-Fi there without relying on a wireless connection between the buildings to reach your home network.

Garden office without an Ethernet cable

Without a cable, a wireless node must still have a usable connection to your home network where you plan to put it, so you can follow the cookery class on screen.

Outdoor installation

If you plan to install a node outdoors without shelter, consider the weather protection, power supply and connection to your existing mesh system together.

What should you look for when buying?

First, check how the node will connect to your home network. Then consider compatibility with your existing mesh system and the requirements of the actual installation location.

Consideration What to check before buying Who should consider this?
Wireless backhaul without a cable Test the connection where you’ll be watching the screen. For the Deco X50-Outdoor connected wirelessly, TP-Link recommends a distance of no more than 10 m from the main node where possible; 15 m is the upper limit of this model-specific recommendation, not a guaranteed range. If I can’t run a cable, the node in my garden office still needs a usable signal from the house. Around 31% of consumers prioritise wireless backhaul.
Wired backhaul Check whether there’s an Ethernet connection at the destination and whether your chosen device supports Ethernet backhaul or LAN bridge mode. For the Repeater 3000 AX, FRITZ! specifies LAN bridge mode with a compatible FRITZ!Box and FRITZ!OS 7 or later. If there’s an Ethernet cable in my garden office, I want to connect the node there rather than rely on a wireless signal passing through walls. Around 31% of consumers prioritise wired backhaul.
Compatibility with your existing mesh system Check your router or mesh master model, firmware requirements and pack size. Any extension should be explicitly compatible with your existing system. If I want to keep using my existing devices, the extension needs to work with my mesh system. Around 23% of consumers prioritise compatibility.
Sheltered or exposed installation location Decide whether the device will really be installed outdoors without shelter. If so, check its IP rating, intended power supply and the conditions of use for that specific model. If the node has to be installed outdoors, I need a device designed for that purpose and a suitable power supply. Around 15% of consumers prioritise outdoor installation.

Common buying mistakes

  • Assuming the advertised Wi-Fi speed reflects the connection where you’ll be watching

    The quoted data rate doesn’t tell you how reliable the backhaul will be through walls or between buildings. For a cookery class, what matters is how well the video plays where you’ll actually be using it.

    Test the stream where you plan to watch and check the connection to your home network before settling on the final position.

  • Putting the node where the signal already drops out

    An additional mesh node still needs a strong enough connection to your house. A location without a usable signal won’t automatically solve the problem.

    Check the connection to the main node before installing it permanently. Only apply manufacturers’ distance recommendations to the specific model they refer to.

    You may need to try a different location, add another node or use a wired connection.

  • Mistaking a single device for a complete mesh kit

    A single node and a multi-unit kit are designed for different set-ups. Outdoor extensions are also specified for particular product families.

    Before buying, check the pack size, your existing mesh master and whether the specific extension is compatible.

    You may need additional compatible nodes to cover multiple locations.

  • Assuming weather protection guarantees reliable outdoor use

    An IP rating doesn’t solve power supply issues or a weak backhaul. For outdoor installation, you also need to consider the conditions specified for the device and how it operates wirelessly.

    Only choose a model designed for exposed outdoor installation if you genuinely need one. Check the power supply, installation requirements and the conditions of use that apply in Germany.

    Depending on the installation, you may need a suitable power supply and mounting accessories.

Key brands at a glance

TP-Link

The Deco range includes mesh devices for indoor use, as well as outdoor models that extend a compatible Deco network.

  • TP-Link lists IP65 protection and PoE or AC power options for the Deco X50-Outdoor.
  • For a wireless connection, TP-Link recommends a distance of no more than 10 m from the main Deco node where possible. Weather protection can’t make up for a poor connection.

FRITZ!

The FRITZ!Repeater 3000 AX is worth considering as an addition to an existing FRITZ! mesh system if you have an Ethernet connection in your garden office.

  • FRITZ! documents LAN bridge operation and specifies a compatible FRITZ!Box with FRITZ!OS 7 or later.
  • The documented wired connection doesn’t make this device a designated solution for exposed outdoor installation.

eero

The eero Outdoor 7 is described as an outdoor extension for an existing eero network.

  • eero lists an IP66 rating and PoE+ for this model.
  • Coverage and speed claims don’t prove that the connection will work in your particular garden office. Check compatibility and what’s included in the pack before buying.

ASUS

The ZenWiFi BD4 Outdoor is an outdoor option for a compatible ASUS mesh system.

  • ASUS lists an IP65 rating and PoE for this model.
  • Before buying, check that it works with your specific mesh system and confirm what’s included in the pack. ASUS notes that specifications may vary by country.

NETGEAR

Orbi is an indoor mesh option to consider if you’re looking at a new system with Ethernet backhaul between locations that are far apart.

  • NETGEAR says Ethernet backhaul is useful when the router and satellite are far apart or the building layout affects the wireless signal.
  • The stated coverage area for an Orbi kit doesn’t prove that the wireless connection will reach your garden office through two buildings.

Joybuy products for Deco mesh and indoor use

The Joybuy products below are for extending an existing Deco network or setting up a Deco mesh system for indoor use.

TP-Link Deco M4 AC1200, 1-pack

TP-Link Deco M4, AC1200, 1-pack

Described as a single node for extending an existing Deco mesh system; the product description specifies indoor use.

Dual-band AC1200, Gigabit ports and Ethernet backhaul.

View at Joybuy
TP-Link Deco M4 AC1200, 3-pack

TP-Link Deco M4, AC1200, 3-pack

A mesh kit with three units for setting up a Deco network; according to the description, it can be configured as a router or access point.

Dual-band AC1200, Gigabit ports and seamless roaming, according to the product name.

View at Joybuy
TP-Link Deco X1500 Wi-Fi 6 AX1500, 2-pack

TP-Link Deco X1500, Wi-Fi 6 AX1500, 2-pack

A Deco mesh kit with two units for covering several areas; the product description says you can extend it with additional Deco units.

Dual-band, AX1500 and Gigabit ports.

View at Joybuy
MERCUSYS Halo H1200G AC1200, 3-pack

MERCUSYS Halo H1200G, AC1200, 3-pack

A mesh kit with three units for creating a single network across several rooms.

Dual-band AC1200, Gigabit ports and seamless roaming, according to the product name.

View at Joybuy

Frequently asked questions

How can I tell whether my broadband or the Wi-Fi connection to my garden office is disrupting the cookery class?

Test playback where you plan to watch, then compare it with a test near your home router. YouTube recommends a sustained speed of around 5 Mbit/s for HD 1080p streams. This figure applies to YouTube and isn’t a guarantee for other cookery class platforms.

Can I connect the mesh node by cable even if the screen uses Wi-Fi?

Yes, if your chosen system supports this set-up. FRITZ! describes LAN bridge mode for the Repeater 3000 AX with a compatible FRITZ!Box and FRITZ!OS 7 or later; TP-Link confirms Ethernet backhaul for the Deco X50-Outdoor. The node can provide Wi-Fi at the destination.

Do I need a weatherproof node for my garden office?

Only if the device will actually be installed outdoors without shelter. TP-Link lists an IP65 rating for the X50-Outdoor, while eero lists IP66 for the Outdoor 7. If your device is in a sheltered indoor space, you don’t need an outdoor model just because it’s in a garden office.

What additional equipment should I check before buying?

Check whether you’ll need an Ethernet cable, a compatible PoE power supply or additional compatible mesh nodes at the location. eero describes eero Plus as an optional service; NETGEAR says the Orbi RBK763S includes the first year of Armor.

Can an outdoor mesh device use any Wi-Fi band in Germany?

You can’t assume that every band is permitted for every outdoor installation. As of August 2026, the Bundesnetzagentur’s frequency plan sets out the applicable conditions; provision 76/2025 repealed the earlier 6 GHz provision 12/2025. Check that the German version of the device and its intended band use comply with the current conditions.