Garden office with a single modem
If you mainly want to stop a single modem restarting during short power cuts, the UPS voltage and connections must be compatible with your device.
A 12 V DC UPS is suitable for a single modem only if the voltage, connector, polarity and power requirements all match. If you have several power supplies, a mains-socket UPS with enough battery-backed outlets offers more flexibility. You’ll also need to consider the combined load, the backup time you need and the conditions where you plan to install it. Manufacturer runtime figures at full or half load can’t simply be applied to your particular set-up. A UPS only keeps the devices connected to it on site powered: the Federal Office of Civil Protection and Disaster Assistance points out that internet and mobile phone services may also be disrupted during a power cut.
If you mainly want to stop a single modem restarting during short power cuts, the UPS voltage and connections must be compatible with your device.
If your connection depends on several devices or power supplies, every device you need must be connected to a battery-backed outlet.
Check that the conditions where you plan to install the UPS fall within the operating limits of the specific model.
First, work out which devices need to stay on. Then compare the connections, combined load and conditions where you plan to install the UPS. The figures show the main priorities people consider when choosing a UPS for a modem in a garden office.
| Priority | What to check before buying | Who is this important to? |
|---|---|---|
| Avoiding a restart | Check the switchover behaviour and battery-backed outlets; test your connected devices after installation. | If I want to ride out short power cuts without my modem restarting, I check how my specific set-up performs. Around 36% of consumers have this as their main priority. |
| Keeping the whole connection powered | List the devices and power supplies you need; check the combined load, number of battery-backed outlets and runtime at that load. | If other devices needed for my connection must stay on as well as the modem, I take their power supplies and total power consumption into account. Around 29% of consumers prioritise this. |
| Powering a single modem correctly | Check the output voltage, power requirements, connector size and polarity against the device or its power supply. | If I only want to power one modem directly, I first check that the DC connections are a proper match. Around 21% of consumers focus on this. |
| Installation location and maintenance | Check the operating limits of the specific model against the planned location; consider whether the battery can be replaced. | If the conditions in my garden office or the prospect of replacing the battery later influence my decision, I check them against the model specifications. Around 14% of consumers put this first. |
The Eaton 3S550D has three battery-backed Schuko outlets; according to Eaton, the other three provide surge protection only. A device plugged into one of those outlets won’t stay powered by the battery during a power cut.
Connect every device you want to keep running to an outlet specifically labelled as battery-backed.
Runtime depends on the actual load. The manufacturer’s runtime figure for a typical router isn’t a guarantee for your modem or your particular set-up.
Check the power consumption, connections and backup time required for the exact devices you want to power.
Operating conditions vary by model. For example, Eaton specifies a temperature range of 0 to 40 °C and non-condensing humidity for the Eaton 3S550D.
Compare the conditions at your planned installation location with the data sheet for the specific model.
The models mentioned include a direct 12 V DC solution for a compatible device, as well as mains-socket UPS models such as the VI 650 SHL.
The 3S Gen2 range includes mains-socket UPS models for several power supplies; the specifications below relate to the 3S550D model.
The BU650E-FR is a line-interactive model with AVR and three battery-backed outlets.
The SPS 900 SOHO+ is a line-interactive model with four Schuko outlets for office equipment.
First, work out which devices need to stay on during a power cut and add up their combined power consumption. Compare this load with the manufacturer’s runtime figures. Figures for full or half load can’t be reliably applied to your modem unless the load specifications are comparable.
Compare the temperature and humidity at the dry installation location with the operating limits of the specific model, then test your connected devices after setting everything up. According to VDE, electrical equipment affected by flooding must be checked by a qualified professional before it is put back into use.
Check whether the battery is replaceable for the specific model and which replacement parts are available. The German Environment Agency points out that used batteries must be collected separately from unsorted municipal waste; old electrical equipment must not be put in household rubbish.
No. According to the European Union, the manufacturer is responsible for ensuring that a product meets the applicable requirements and bears the CE marking. The marking shouldn’t be confused with a general certificate issued by a central EU body.
No. A UPS only powers the local devices connected to it. The Federal Office of Civil Protection and Disaster Assistance points out that internet and mobile phone services may also be disrupted during a power cut.