Who would benefit from a switch in a garden office?

Connect a printer and PC via LAN

If a suitable network connection is already available in your garden office and you want to connect a printer and other devices via LAN, the key considerations are the number of free ports and ease of setup. HP Support Germany explains how to connect a printer to a router, switch or hub via Ethernet.

Plan the connection to your home

If you’re setting up a new connection to your garden office, first consider the type of cable, its route and how to protect the connection between the buildings. DEHN lists data cables between buildings as a type of cable to consider when planning protection.

Power another device via PoE

If you’re planning to connect a PoE-enabled access point or another compatible device as well as your printer, its power requirements must match the switch’s PoE ports and power budget. NETGEAR lists access points and cameras as examples of devices that can use PoE.

What should you look for when choosing one?

First, check whether there’s already a suitable connection to your home. Then consider how many LAN ports you actually need, the conditions where the switch will be installed and whether you need PoE. These factors will help you decide whether a basic switch is enough or if you need to plan for additional components.

Consideration What to check before buying Who this matters most to
Connection between the buildings Check the existing uplink and connection type. If you’re installing a new connection between buildings, get professional advice on the protection measures needed. If I’m setting up a connection between my home and garden office, I want to decide on the cable type and protection measures before choosing any equipment. Around 36% of consumers put this home connection first.
Enough LAN ports Count the uplink and all the devices you plan to connect, and check whether the printer has an Ethernet port. If I want to connect my printer and PC to the network at the same time, I need enough ports in addition to the uplink. Around 29% of consumers prioritise extra LAN ports.
Installation location Check the temperature, permitted humidity and condensation requirements against the specifications for the exact model. If the temperature or humidity in my garden office varies considerably, I want to know whether the planned location meets the operating requirements. Around 21% of consumers focus primarily on installation conditions.
PoE for other devices Check that the end device supports PoE, and check the switch’s PoE standard, number of PoE ports and total power budget. If I want to power a compatible access point or another device via Ethernet as well as connect my printer, the switch’s PoE capabilities must meet its requirements. Around 14% of consumers prioritise this additional PoE requirement.

A five-port switch has four physical ports available for other connections when one is used for the uplink. For a newly planned fibre-optic connection, TP-Link lists the MC220L as a media converter between fibre and copper; a compatible SFP module is required. A media converter with one RJ45 port isn’t a substitute for a switch with multiple device ports.

Common planning mistakes

  • Confusing the switch with the connection to your home

    A switch distributes an existing network connection to other devices, but it doesn’t provide the connection to your home itself. If you’re installing a new connection between buildings, planning the cabling is part of the project.

    First, check what type of connection is available in your garden office. If you’re planning a new connection, decide on the cable type and protection measures before choosing a switch. Depending on the setup, you may need cabling, a media converter, compatible SFP modules and installation work.

  • Assuming all five ports are free for devices

    If a five-port model uses one port for the uplink, that leaves four ports for your printer and other devices.

    Before buying, count the uplink, printer, PC and any other devices you plan to connect. If possible, leave one port free as a spare.

  • Assuming a metal casing provides weather protection

    The casing material doesn’t prove that a switch is suitable for damp conditions, condensation or low temperatures. TP-Link specifies an operating temperature of 0–40 °C and relative humidity of 10–90 % without condensation for the TL-SG105.

    Compare the conditions at your chosen location with the specifications for the exact model version, and plan to install it in a sheltered spot.

Brands to consider

TP-Link

The range includes both basic desktop switches and separate components for planned fibre-optic connections.

  • TP-Link describes the TL-SG105 as fanless and ready to use without configuration. Its specified operating conditions require humidity to be non-condensing.
  • The MC220L is a media converter with one RJ45 port. A compatible SFP module is required for a fibre-optic connection.

NETGEAR

The GS305v3 and GS305PPv3 differ in their PoE capabilities, so it’s important to check the model version.

  • NETGEAR lists four PoE+ ports and a total power budget of up to 83 W for the GS305PPv3.
  • No PoE power budget is specified for the GS305v3. Don’t assume that features of the PoE version also apply to the standard model.

D-Link

The DGS-105 is positioned as a five-port Gigabit switch for home networks or small offices.

  • For revision E1, D-Link lists five Gigabit ports and plug-and-play operation.
  • These specifications apply to the stated revision. Before buying, check that the model and version match.

Zyxel

The GS-105B V5 is another compact five-port Gigabit option.

  • Zyxel lists fanless operation and plug-and-play setup for the GS-105B V5.
  • The specified model name refers to V5. Don’t assume that details for older revisions apply without checking.

Joybuy products for extra network connections

This selection includes Gigabit switches for adding LAN ports, including models with PoE or SFP features. Whether a particular model is suitable for your planned home connection and installation location depends on its ports and operating conditions.

Ubiquiti UniFi Switch Flex Mini USW-FLEX-MINI-EU

Ubiquiti UniFi Switch Flex Mini USW-FLEX-MINI-EU

For connecting several wired devices when you need a compact managed switch with five Gigabit RJ45 ports.

The product description lists USB-C or a PoE input for power. The PoE port is an input; the switch doesn’t supply power to connected devices via PoE.

View at Joybuy
D-Link DGS-1005P/E Gigabit desktop switch with PoE+

D-Link DGS-1005P/E

For connecting a printer and other LAN devices, with the option to add compatible PoE devices.

Five Gigabit RJ45 ports, including four PoE+ ports; the stated total power budget is 60 W. The PoE power available must meet the requirements of the connected devices.

View at Joybuy
D-Link DGS-1210-10/E Smart Managed Switch

D-Link DGS-1210-10/E

For a garden office with several wired devices, when you need more LAN ports and SFP slots.

Eight Gigabit RJ45 ports and two Gigabit SFP slots. The model is described as Smart Managed, with a web interface available for management.

View at Joybuy
TP-Link TL-SG1005D Gigabit desktop switch

TP-Link TL-SG1005D

For a simple way to add LAN ports when you need to connect a printer and other wired devices.

Five Gigabit RJ45 ports, with plug-and-play operation and a fanless design specified for this model.

View at Joybuy
TP-Link TL-SG105PE Easy Smart Switch with PoE+

TP-Link TL-SG105PE

For adding wired devices when you want to power compatible PoE devices as well as connect your printer.

Five Gigabit ports, including four PoE+ ports; the stated total power budget is 65 W. The PoE power available must meet the requirements of the connected devices.

View at Joybuy

Frequently asked questions

Do I need a switch if I’m only connecting a printer in my garden office?

Not necessarily. If your printer has Ethernet and there’s already a suitable free network port, you can connect it directly. A switch is mainly useful for adding more available ports.

How do I set up an Ethernet network printer?

Connect the Ethernet-enabled printer to your router or switch with a cable, then install the software for your model. HP Support Germany describes this process for HP printers; for other brands, follow the instructions for the specific model.

Can I put a desktop switch in an unheated or damp garden office?

That depends on the exact model and the conditions at your chosen location. TP-Link specifies an operating temperature of 0–40 °C and relative humidity of 10–90 % without condensation for the TL-SG105. Check that your planned location meets the specifications for the model you choose.

Are a manufacturer’s guarantee and your statutory consumer rights the same thing?

No. Your statutory rights are a legal claim against the seller, while a manufacturer’s guarantee is a voluntary offer with its own terms. The Verbraucherzentrale notes that a guarantee doesn’t replace your statutory rights.

What product regulations apply to a network switch in Germany?

Products covered by relevant EU harmonisation legislation must comply with it and carry the CE mark. The Bundesnetzagentur describes its market surveillance activities, which include products covered by the relevant regulations. This doesn’t mean a product is automatically suitable for use in a damp location or for a particular type of cabling between buildings.