What should you consider when choosing one?
First, work out which devices need to keep running during a power cut, then compare their combined load with the wattage limit and runtime stated for the specific model.
| What you need |
What to check before buying |
Who is this most important for? |
| Time to save your work |
Compare the combined power consumption in watts with the runtime at that load. Schneider Electric explains that runtime depends on the load and UPS model. |
If I need to save an open file and shut down my computer properly during a power cut, I need enough time for my actual combination of devices. Around 33% of consumers therefore put time to save their work first. |
| Temperature and humidity |
Compare the conditions at the intended location with the limits specified for the exact model. Eaton, BlueWalker and CyberPower list limits for individual models. |
If my garden office gets cold in winter or could become damp, I need to check in advance that the location is suitable for the specific UPS. Around 27% of consumers prioritise the conditions where the UPS will be placed. |
| Automatic shutdown |
Check the USB data connection, operating system support and shutdown software for the specific model, then set up the function. |
If I’m not always at my computer when the power goes out, I need a supported, configured shutdown connection – not just a USB port for charging. Around 20% of consumers focus mainly on this feature. |
| Connecting additional devices |
Connect only the devices you need to battery-backed outlets, then check the load and runtime again. |
If my monitor or networking equipment also needs to keep running during a power cut, I need enough battery-backed outlets and sufficient power capacity. Around 20% of consumers focus on powering several devices. |
Suitable products on Joybuy
Related products coming soon.
FAQs about UPSs in garden offices
How do I work out how much runtime I need to save my work?
Add up the power consumption of the devices that need to keep running during a power cut, then check the runtime of the specific model at that load. Allow time to save your work and shut down your computer. Schneider Electric notes that a VA rating alone doesn’t tell you the runtime in minutes.
Does my monitor need to be plugged into a battery-backed outlet?
If you still need to save a file manually on your desktop, the display you need to do so must also stay powered. Check the outlet labels: according to CyberPower, four of the eight Schuko sockets on the BR700ELCD are battery-backed.
Can I keep a UPS in an unheated garden shed?
It depends on the conditions at the installation location and the limits for the specific model. Eaton lists an operating temperature of 0 to 40 °C for the 3S550D, with non-condensing humidity. The CyberPower manual requires the BR700ELCD to be kept indoors in a temperature- and humidity-controlled environment. Compare the actual conditions with your UPS manual.
What do I need to set up for automatic shutdown?
Check that your specific UPS and operating system support a USB data connection and a suitable shutdown function. Connect and configure both. Schneider Electric describes PowerChute Serial Shutdown for supported devices via USB or a serial connection.
What should I know about replacing the battery?
Check whether a suitable replacement battery is available for your exact model and how to replace it. Eaton lists the 3S550D as having a user-replaceable battery; this doesn’t tell you the replacement cost or how often it needs changing.