First, check your internet connection’s actual upload speed, then check the connection all the way to your garden office: a mesh node can’t speed up a slow broadband connection. If you can run an Ethernet cable, a wired mesh node or access point could be a good fit. Without a cable, the choice between Wi-Fi and powerline depends on signal strength, your electrical wiring and the system you already have.
Who is this guide for?
Regular portfolio uploaders
If you upload large work files from your garden office, first work out whether it’s your broadband connection or the connection at your desk that’s slowing you down. The German Federal Network Agency provides tests that also measure upload speed.
Garden offices without an Ethernet cable
If there’s no cable running to your workspace, Wi-Fi or a powerline connection that you’ve tested on site could be an option. devolo warns that individual sockets may cause interference.
Users with an existing mesh system
If you want to extend your existing network, check the product range, backhaul and installation location together. FRITZ! describes a LAN connection for the FRITZ!Repeater 3000 AX, while TP-Link lists Deco compatibility for its Deco models.
What should you look for when buying?
Wired backhaul
A good fit if: you already have a suitable Ethernet cable or can have one professionally installed.
The trade-off: Installation may take some work, and it won’t increase your broadband connection’s upload speed.
Wireless mesh
A good fit if: a usable signal reaches the planned location from your house and the devices belong to the same mesh system.
The trade-off: Walls and node placement can limit the wireless connection. Advertised Wi-Fi data rates don’t tell you what upload speed you’ll get in your garden office.
Powerline with Wi-Fi
A good fit if: the connection works between the sockets you plan to use and you don’t want to run an Ethernet cable.
The trade-off: Your choice of socket and the devices plugged in nearby can affect performance, so test it with your actual setup.
| What matters |
What to check before buying |
Who is it important to? |
| Actual upload speed |
Measure your fixed broadband upload speed separately from the connection at your workspace; don’t mistake headline Wi-Fi data rates for file upload speeds. |
When I upload large portfolio files, I want to know whether my broadband connection is the bottleneck or whether it’s the connection in my garden office. Around 36% of consumers want to identify upload bottlenecks first. |
| Connection to the garden office |
Check whether a LAN connection is available or possible, the signal at the mesh node’s planned location and, if relevant, powerline performance at the sockets you intend to use. |
Without an Ethernet cable, I need to find out which connection actually works between my house and workspace. Around 36% of consumers put this concern first. |
| Compatibility |
Check your router against the full product range; don’t assume that devolo Magic can be extended with dLAN adapters. |
If I want to keep my existing network, I need a compatible extension node rather than an unplanned change of system. Around 19% of consumers want to check compatibility first. |
| Installation and power supply |
Check whether the model is designed for indoor or outdoor installation, its protection rating, installation requirements and the right power supply. |
If I need to install the node outdoors, I need a model with the right protection and power supply for my planned setup. Around 9% of consumers say installation and power supply are their main concerns. |
Common misconceptions to avoid
-
Confusing the combined Wi-Fi data rate with upload speed
An advertised combined wireless rate doesn’t tell you what upload speed you’ll get in your garden office. The German Federal Network Agency provides tests that measure your broadband connection’s upload speed.
Check your broadband upload speed first, then test the connection at your workspace.
Adding another node may leave the real bottleneck unchanged.
-
Placing a wireless node where the connection to the house is weak
Walls and node placement can limit the wireless connection. For the Deco X50-Outdoor connected wirelessly, TP-Link gives a recommended distance based on the model and location.
Check the planned location before you install the node permanently. If the wireless connection won’t work there, compare LAN with an alternative you’ve tested on site.
Depending on your setup, you may need another node or a different connection.
-
Assuming devices are compatible just because they’re labelled “mesh” or “powerline”
The term “mesh” doesn’t prove that devices from different product ranges will work together as one system. devolo says that Magic can’t be extended with dLAN adapters.
Before buying, check the full model name and whether it’s compatible with your existing system. Test powerline using the sockets you plan to use.
Devices that aren’t compatible may not be useful for your planned setup.
Relevant brands and product ranges
FRITZ!
The FRITZ!Repeater 3000 AX could extend an existing FRITZ!Box mesh or connect via LAN.
- FRITZ! lists three Wi-Fi bands and two Gigabit LAN ports for this model.
- The advertised combined Wi-Fi rate isn’t an upload speed measured in your garden office. The specifications don’t make this an outdoor model.
TP-Link
The Deco X50-Outdoor is an option for planned outdoor installation or extending a Deco mesh.
- TP-Link lists IP65 protection, PoE or power-adapter supply, and Ethernet backhaul.
- The recommended distance for a wireless connection depends on the model and location. Deco compatibility doesn’t mean it will form a shared mesh with other brands.
devolo
The Magic 2 WiFi 6 next Starter Kit combines powerline with Wi-Fi at the destination, provided your electrical wiring supports a suitable connection.
- devolo lists two adapters in the Starter Kit and Wi-Fi at the destination.
- devolo warns that individual sockets may cause interference and lead to low transfer rates. Magic and dLAN adapters can’t be used to extend one another.
Ubiquiti
The UniFi U6 Mesh is an access point for a planned UniFi setup with PoE installation.
- Ubiquiti lists a GbE uplink, PoE and IPX5 protection.
- According to Ubiquiti, weather resistance applies when the device is positioned and installed as specified, using the supplied accessories. The data sheet lists a UniFi Network software requirement for UniFi management.
Joybuy products for extending your Wi-Fi
These products are mesh systems and extension nodes for indoor use. To use one in a garden office, the connection to the house must work at the planned location. Indoor models aren’t designed for unprotected outdoor installation.
No image available
TP-Link Deco BE22, 2-pack, Wi-Fi 7
This model could suit a setup with two mesh units and wired devices; you’ll need to check separately that the connection reaches your garden office.
Two Gigabit WAN/LAN ports per unit. For dry indoor spaces; keep away from water, high humidity and direct sunlight.
View at Joybuy
No image available
TP-Link Deco M4, 1-pack, AC1200
This model could work as a single node to extend an existing Deco network, provided there’s a suitable connection at the location.
Two Gigabit Ethernet ports; supports Ethernet backhaul. Designed for indoor use. Keep away from rain and moisture.
View at Joybuy
No image available
TP-Link Deco M4, 3-pack, AC1200
If you need several mesh units to cover your indoor space, this pack includes three. Check the connection at your garden office.
Two Gigabit LAN/WAN ports per unit.
View at Joybuy
No image available
MERCUSYS Halo H1200G, 3-pack, AC1200
For a setup with several mesh units indoors; whether the connection reaches your garden office depends on the specific location.
Ethernet ports per unit. Keep away from moisture and operate within the specified temperature range of 0 °C to 40 °C.
View at Joybuy
No image available
MERCUSYS Halo H1200G, 2-pack, AC1200
If you need two mesh units to cover your indoor space, this pack could be a good fit. Check the connection between your house and garden office at the planned location.
Gigabit Ethernet ports per unit. Don’t use in damp conditions or expose to liquids.
View at Joybuy
Frequently asked questions
How can I check whether my internet connection is limiting portfolio uploads?
First, measure your fixed broadband upload speed, ideally over LAN, then compare it with a test at your workspace. The German Federal Network Agency’s broadband test also measures upload speed. A single Wi-Fi test isn’t a LAN measurement for its annual reports.
Does the Deco X50-Outdoor need an additional power supply when using PoE?
According to TP-Link, the device can be powered either by an IEEE-802.3at PoE switch or injector, or by the specified power adapter. With PoE, power and Ethernet backhaul can run through the same cable. Before installation, check that your available power supply matches the device specifications.
What should I bear in mind when using powerline in a garden office?
Test the adapter pair in the sockets you’ll use once everything is set up. devolo recommends plugging adapters directly into wall sockets where possible, and warns that devices such as power supplies and dimmers can interfere with data transmission.
Can I use Wi-Fi in a garden office in Germany without an individual frequency allocation?
The German Federal Network Agency has allocated certain frequencies for general Wi-Fi use, including 2.4 GHz and 5 GHz. The conditions of the relevant general allocation apply. This doesn’t mean you can use any device on any channel outdoors. For outdoor installation, check the device requirements and make sure your specific wireless configuration is permitted.
Which connections and power supply should I check before buying?
Check your planned setup against the connections and power supply available at the installation location. For wired backhaul, check Ethernet support and cable routing. For an outdoor device, make sure the installation requirements and specified power supply are suitable for that particular model.